SIMULIA 리소스 센터

Offshore wind energy plants promise to become an important source of energy in the near future. It is expected that within 10 years, wind parks with a total capacity of thousands of megawatts will be installed in European seas. The foundation of such offshore wind energy plants plays an important role in the stability of these structures. High demands have to be made concerning foundation design and construction methods to find economical and technically optimal solutions. Two foundation concepts which can be used in this field are the monopile and the tripod.

Customer Papers

Thread connections are widely used in oil and gas industry. Determination of burst and collapse response of threads under critical pressure is important in a design process; however, a straight forward analysis of helical thread connections would require a huge model and long computing time. This paper will discuss other techniques that can determine the required information more efficiently.

Customer Papers

Production of glass bottles requires blowing of the glass after entrance of a gob of molten glass in the blank mould. The final shape of the bottle is highly dependent on the viscosity of the glass, the blow-pressure and the temperature distribution in the glass and the mould and simulation of this complicated process enables optimization of the process conditions. During simulation of blowing of the glass, the mesh has to be adapted due to the extreme deformations of the mesh. Using the existing ALE-technique for this kind of applications requires a lot of userintervention and trial-and-error to create a mesh that suits both the initial and final topology of the glass.

Customer Papers

The combined load condition that develops in a casing string during its installation in a directional or horizontal oil well needs to be considered in the structural integrity analysis routinely undertaken as part of the well completion design process. This paper presents a non-linear finite element analysis methodology, completed using ABAQUS 6.6, which simulates the installation of casing in directional/horizontal wells. The paper describes the development of the finite element model and demonstrates its use as an effective and reliable method for assessing casing structural integrity in the design of such well completions.

Customer Papers

The paper presents a numerical simulation of the drop test in a still water for the multi-component box structure. The complexity of the problem is in the strong fluid-structure interaction (FSI) between the box and the water free surface. The numerical simulation of the drop test is performed with two software tools: Abaqus and FlowVision through the direct coupling interface, which manipulates, on the Abaqus side the Lagrangian finite-element mesh and on the FlowVision side the Eulerian finite-volume mesh with sub grid geometry resolution.

Customer Papers

Solutions to challenging structural mechanics problems often rely on approaches that properly integrate theoretical analysis, experiments, and finite element simulation, along with judgment and practical approximations. Combining these elements is important not only for the original methods development of a given problem class, but also for repeated applications of such methods. This paper describes how multiple software solutions, namely Abaqus, Mathcad, and KornucopiaTM have been blended together to create robust approaches to address several challenging problems in nonlinear mechanics.

Customer Papers

Woven polymer- based composites are currently used in a wide range of naval applications. Use of composite materials in critical applications requires that dynamic material behavior be fully characterized. Composite material behavior is generally well understood in the linear regime, and can be predicted with sufficient confidence up to the point of first ply failure. However, the mechanical behavior beyond first ply failure is not characterized by a validated theory that can account for material nonlinearity, strain rate dependence, and progressive failure. The objective of this work is to develop and validate a progressive failure approach that can be used for woven fabric polymer-based composites subjected to dynamic loads.

Customer Papers

In order to reduce the time to market with maintained or improved quality, virtual testrigs is emerging as an important technology in the commercial vehicle industry. Development testing consists of forcing a system B (a physical or virtual test rig) to behave like system A (a vehicle on the test track). This is achieved by choosing the “best” input signals to system B in a process generally referred to as “drive signal iteration”. It is a classical inverse problem of a multivariable function where the key challenge is to get a good estimate of system transfer function. This paper describes how Abaqus may be used for this process.

Customer Papers

This study examines the use of the Altair/MotionView package to create a MBS model which is run in ABAQUS using rigid bodies and Connector elements. The results of the connector model are correlated against MBS data and then the major suspension components are introduced into the SLI model either as linear substructures or as fully non-linear components. These models are then run in ABAQUS to determine suspension strength as a complete system and also to provide a more realistic stress history for the fatigue analysis.

Customer Papers

As design cycle times are shortened, engineers continue to find ways to be more productive. Generally, one tries to leverage software tools to get solutions faster. This productivity improvement is possible through continued software advancements, such as the Pro/ENGINEER to Abaqus/CAE Associative Import, via an Elysium Neutral (Assembly) File. Engineers can iterate from CAD to FEA while retaining applied loads and boundary conditions. This paper will discuss use of the associative import features with design changes (such as thickness change, split surfaces, or holes). The pros and cons in using the tool will be tabulated. The reader will see that using the associative import can reduce design iterations from weeks to days.

Customer Papers

Finite Element (FE) analysis of the Thermal Protection System (TPS) of the European eXPerimental Re-entry Testbed (EXPERT) is presented in this work. The atmospheric re-entry vehicle is subjected to thermal and mechanical loads during its different flight phases, i.e., accelerations, random vibrations, acoustic and shock loads during launch phase, aerodynamic heating and aerodynamic forces during the re-entry phase, and impact shock at the ground impact. Thermal and structural FE models are created to predict the thermal and thermomechanical performances of the EXPERT TPS. Geometrical and material non-linearities are accounted for in the FE analyses. The FE analyses results are used for the EXPERT TPS design verification and improvement.

Customer Papers

The simulation of crashworthiness plays an important role in the design process of today’s automotive industry. Recently, efforts have been made to consider the effects of adhesive joints in the simulations. Flexible adhesive bonds typically have a thickness of one to five millimeters. Therefore, a detailed three-dimensional representation of the adhesive layer is infeasible in industrial crash simulations. For quasi-static loading conditions the submodeling technique is one possible solution to this problem. But if the influence of the fracture process on the deformation behavior of the structure is of interest like in crash simulations, then submodeling is insufficient.

Customer Papers