SIMULIA 리소스 센터

This course describes how to use CST's Multiphysics Studio to perform thermal and mechanical analyses. The course reviews the basic concepts of heat transfer and mechanical behaviors of materials, then explains the sources, boundary conditions, meshing and solver options available in MPS, and illustrates the steps of an EM-Thermal-Mechanical coupled simulation.

Course Catalog

Buckling and postbuckling behavior is critical to the success of certain designs. For example, crashworthiness of an automobile requires that particular vehicle components collapse in ways that maximize energy absorption. On the other hand, successful designs of imperfection-sensitive, thin-walled shell structures, ranging from beverage containers to large pressure vessels, must prevent unintentional buckling.

Course Catalog

Obtaining converged solutions for highly nonlinear simulations can sometimes be challenging. Difficulties can arise, especially in simulations involving contact, complicated material models and geometrically unstable behavior. This course provides an in-depth discussion on solving nonlinear problems in Abaqus/Standard and addressing the most common convergence-related issues.

Course Catalog

This is a two-day course on Composites Modeler for Abaqus/CAE, an add-on product that complements and extends the powerful ply modeling features in Abaqus/CAE. Composites Modeler for Abaqus/CAE provides proven fiber simulation capabilities and advanced model building—all seamlessly integrated within Abaqus/CAE. It allows you to model composite structures in Abaqus/CAE in a way that reflects the composite's manufacturing processes.

Course Catalog

This course describes and demonstrates how to use CST for Signal Integrity/high speeds technology. The course will go over some fundamentals of how to set-up and run an electromagnetic simulation - it will take the viewpoint of how to do this for electronics applications and spends a good amount of time on features and tools that are helpful and specific for this area

Course Catalog

Throughout this course you will become familiar with the use of the Charged Particle Module. You will be able to use and run the different solvers available within the CST Studio Suite environment. This training course is well suited for the design of vacuum electronic devices, the accelerator community and any applications taking into account the propagation of a charged particle beam under vacuum or a dispersive media like a plasma.

Course Catalog

This course aims to improve users’ experience with the tools in CST Studio Suite dedicated to electromagnetic simulation of low-frequency and static applications. After a short overview of the basic usage of CST Studio Suite, the course focuses on the various available sources and solvers in CST EM Studio.

Course Catalog

Real-world engineering commonly involves the analysis and design of complicated geometry. These types of analysis depend critically on having a modeling tool with a robust geometry import capability in conjunction with advanced, easy-to-use mesh generation algorithms. This course provides an in-depth look at several advanced Abaqus/CAE capabilities: CAD geometry import and repair, meshing and partitioning of complicated geometry. Both native and neutral geometry formats are discussed.

Course Catalog

Understanding the interaction between bodies is essential for solving many engineering problems. Manufacturing processes, gears, bearings, seals and dynamic impact events all involve contact. This course covers many techniques and guidelines for solving challenging contact problems. Participants are given a brief overview of the contact formulation and contact logic used in Abaqus/Standard.

Course Catalog

This course is a comprehensive and unified introduction to the modeling and analysis capabilities of Abaqus. It teaches you how to solve linear and nonlinear problems, submit and monitor analysis jobs and view simulation results using the interactive interface of Abaqus.

Course Catalog

This course is an introduction to the interactive connector between Simpack and the 3DEXPERIENCE platform.

Course Catalog

This course is an introduction to performing basic injection molding simulation for product and design innovation on the 3DEXPERIENCE platform. The Plastic Part Filling app enables realistic simulation of the mold filling manufacturing process.

Course Catalog

Visteon is a leading global automotive supplier that designs, engineers, and manufactures innovative components and systems for virtually every vehicle manufacturer worldwide.

Customer Story

As a testing ground for the next generation of world-class engineers, Formula Student ranks high. In 2012, 468 universities and colleges from all over the world took part in this challenging and highly competitive event. The Delft University of Technology (DUT) racing team once again repeated history, finishing first in the electric car category of the Formula Student Germany (FSG) race in Hockenheim, Germany.

Customer Story

Jaguar Land Rover’s heritage comprises some of the world’s most iconic vehicles, including the Jaguar Mark II, the E-Type, and the Land Rover Defender. Having passed through the corporate hands of Ford, Jaguar Land Rover (JLR) has emerged within Tata Motors as an exciting, dynamic global enterprise.

Customer Story

4N was founded by watchmaker François Quentin in 2009, and the 4N brand was born the same year. The 4N addresses the modern luxury watch market and appeals to collectors of exceptional timepieces.

Customer Story

MAHLE Powertrain uses realistic simulation to guide design of new High-Performance 3-Cylinder Engine

Customer Story

A dual-band, high-gain antenna needed to be integrated into an Internet of Things sensor network, while making sure that the antenna is compact enough to fit into the device.

Customer Story

Doctors team with engineers to create virtual twins and usher in a new era of precision and personalized care.

Article

In this article, we demonstrate how simulation with CST Studio Suite can help improve emission performance of products. We analyze the coupling between signal traces on a printed circuit board (PCB) and the reference plane as it is commonly the result of interest in electromagnetic compatibility (EMC) measurements. The presented results are discussed for conducted emission but could be extended to radiated emissions.

Article

Material modeling can be a challenge in any simulation and we’re fortunate to have such great content on this topic from Tod Dalrymple, such as this month’s post on Anisotropic Polypropylene Calibration.

Article

Welcome to our new series, “Your Turn!,” where you can try out different simulation experiences. This experience uses Finite Element Modeling to explore various stent designs in the biomedical industry. Don’t forget to try out the experience for yourself!

Article

Magnet design covers many disciplines of physics, and a unified model for magnet design would have many benefits in accelerating and streamlining the magnet development process. The workflow presented in this blog post allowed a quadrupole magnet to be designed with CATIA, simulated with SIMULIA CST Studio Suite and optimized with Process Composer. This workflow was performed all in one common environment, the 3DEXPERIENCE platform.

Article

Welcome to our new series, “Your Turn!,” where you can try out different simulation experiences. The first experience uses PowerFLOW to help improve energy consumption in buildings. Don’t forget to try out the experience for yourself!

Article

The convergence of the physical and digital worlds is reshaping industries worldwide. Virtual twins underpinned by modeling and simulation play a key role in this transformation journey.

Article

In this second blog of the MODSIM series, Joe Amodeo, SIMULIA CPG-R and Automation and Optimization Industry Process Director, makes the case for unified modeling and simulation as a way of opening up new avenues of innovation while eliminating bottlenecks and reducing time and cost.

Article

MODSIM, or unified modeling and simulation, has much to offer for engineers and designers who want to streamline their workflows, collaborate better and accelerate product development. In this article, we delve into the benefits of MODSIM on the 3DEXPERIENCE platform on the cloud.

Article

In this first blog of the MODSIM series, Dale Berry, SIMULIA Offer Marketing Senior Director, takes a look back on how simulation has evolved over the years, from a specialized expertise to helping companies design better products without the need for physical prototypes. He also talks about the future of simulation and what’s coming next...!

Article

One man’s journey from aerospace to positively impacting healthcare and medicine.

Article

In this blog series, we hear directly from individual SIMULIA Champions about their own personal simulation story. This post from Ye Bin of GAC Research Institute is a continuation in the series, where he talks about how his love of toy cars influenced his decision to become an automotive engineer. Ye also tells us how proud he is to be a SIMULIA Champion because of how simulation helps him get out of his comfort zone.

Article