SIMULIA 리소스 센터

Extraction from oil and gas from an underground reservoir alters the pore pressure distribution in the reservoir strata. Modifications in pore pressure can lead to plastic deformation in the strata, which can in turn modify the pore fluid flow and lead to ground subsidence. Since subsidence can affect the operability of equipment on the ground as well as the safety of buildings and structures, it needs to be accurately predicted and kept within limits. In this Technology Brief, we present a method for predicting the rock deformation and ground and ground subsidence resulting from oil and gas extraction.

Solution Briefs

The latest release of Abaqus version 6.10 includes Abaqus/CFD. The inclusion of this software makes it possible for users to perform a fluid analysis in a more user-friendly manner. Independent single software solely for CFD is currently available from many developers, and many attempts have been made to link software of CFD to structural analysis system using some specific procedures such as fluid structure interfaces (FSI). Direct implementation of CFD in FE structural analysis software offers ease of access to CFD. Adopting the position of a mechanical engineer trying to use CFD for the first time, a series of fundamental analyses were performed using Abaqus/CFD.

Customer Papers

Usually the development of a new engine is initialized by the request of an aircraft manufacturer who formulates basic requirements for the propulsion system. Preliminary engine design is then the first design phase at the aero-engine manufacturer where the engineer’s task is to develop a proper engine concept fulfilling all requirements and to respond to the aircraft company in a short time. At this early design stage only simple models can be used, but the decisions made are far-reaching and need to be precise. Therefore, engine component scaling tools are applied to increase prediction accuracy.

Customer Papers

This paper extends a previously developed computational framework for coupled aerothermoelastic simulations for hypersonic vehicle structures in extreme environments. An aeroheating verification and validation case is first conducted on a Mach 6.5+ spherical dome protuberance that was tested in a NASA wind tunnel. ATA’s simulation includes aerothermoelasticity in the physics and captures the heating of the compliant dome structure during the first five seconds of exposure to hypersonic flow. This case is followed by a coupled quasi-static aerothermoelastic analysis of an acreage panel-level structural component for a sustained, reusable, air-breathing Mach 5–7 cruise horizontal-takeoff platform.

Customer Papers

Accurate modeling and simulation of brittle armor panels under projectile impact is a challenging problem involving costly experimental characterization of material properties and verification of ballistic impact response with actual test data. The nature of impact of brittle armors, specifically those made of cementitious materials, is a problem of much complexity, due to high-rate fragmentation caused by strong compressive shock waves followed by reflected tensile waves. Traditional Lagrangian FEM of these problems can introduce errors and issues of convergence as a direct result of the resulting large deformations of free surfaces. Introducing element erosion can resolve some of the issues related to excessive distortion of elements, but presents new problems involving conservation of mass.

Customer Papers

Traumatic brain injury (TBI) is one of the world’s major causes of death and disability. To aid companies in designing safer and improved protective gear and to aid the medical community in producing improved quantitative TBI diagnosis and assessment tools, a multiscale finite element model of the human brain, head and neck is being developed. Recorded impact data from football and hockey helmets instrumented with accelerometers are compared to simulated impact data in the laboratory. Using data from these carefully constructed laboratory experiments, we can quantify impact location, magnitude, and linear and angular accelerations of the head. The resultant forces and accelerations are applied to a fully meshed head-form created from MRI data by Simpleware.

Customer Papers

voestalpine Krems is a roll forming corporation constantly working on the improvement of product quality as well as the development of new production processes. Abaqus is used in both areas. Within this paper both approaches are shown and compared to each other. The first example problem shows a planetary rolling mill where we performed a feasibility study. The second example problem covers the whole roll forming process. The results are directly fed back to our engineering team to optimize the process. Critical further processing steps can be modeled afterwards by using predamaged parts.

Customer Papers

Drilling through salt has created increasing challenges for the oil and gas industry. In many cases, deepwater exploration around the world requires drilling through salt layers above oil and/or gas reservoirs. Borehole closure and instability due to salt creep are two major concerns in designing completions for production wells drilled through salt layers. Similar issues also occur where gas storage caverns are built in salt formations. Pressure changes that occur in the salt cavern during operation can cause cavern closure and instability.

Customer Papers

In this Technology Brief, we discuss the sudden expansion problem f the FDA Benchmark Noozle model. Overall, Abaqus/CFD results were found to match reasonably well with experimental data and were competently at par or superior to other package software results. The k-ω SST model was found to fare the best among the three turbulence models for the higher Reynolds number cases.

Solution Briefs

Tetra Pak has used numerical simulation tools for plastic injection molding (Moldflow) and structural analysis (Abaqus/Implicit and Abaqus/Explicit) for many years. Today these two simulation tools are used independently of each other without any coupling. How these two disciplines can be combined to better predict the mechanical response of a polymer component is presented in this work. The manufacturing process, in this case injection molding, creates the mechanical properties of the produced polymer part. Process settings, material selection and molding tool geometry affect the polymer flow, material orientation and rate of crystallinity.

Contact

Dynamic problems involving contact are of great importance in industry related to mechanical and civil engineering, but also in environmental and medical applications. Regarding the implicit dynamic structural analysis, Abaqus/Standard has the HHT (Hilber-Hughes-Taylor) method which is a family of unconditionally stable one step methods for the direct time integration. This method is extended from well known Newmark beta method.

Customer Papers