Centre de ressources SIMULIA

In this paper the interface between Abaqus and OpenFOAM is described in the context of a case study of a thermal stress analysis of a coolant tank. The generated interface extracts the pressure, wall temperature and convection coefficient distribution from the OpenFOAM analysis and maps the mechanical and thermal loads over the structural ABAQUS FE-model. This interface allows the engineering team to carry out the thermal stress structural development with an accurate thermal and mechanical load prediction based on CFD analysis without compromising the development cost.

Customer Papers

A numerical procedure for optimization of a coronary stent geometry using three dimensional analysis techniques is presented. The objective of the optimization analyses is to maximize the long term durability (fatigue-safety), while keeping acute structural safety (plastic strains) below a given threshold. The expanded and crimped radial stiffness, as well as diametrical expansion recoil output quantities of each optimization simulation are also monitored. The software used during the optimization process consists of HEEDS, an optimization software package developed by Red Cedar Technology, coupled to Abaqus/Explicit.

Customer Papers

From simple geometry loading to virtual prototyping, this paper exemplifies the stepwise progress towards a successful match between load case, measurement setup and numerical model validation. It also deals with the gaps at the current numerical model availability and proposes optional enhancements.

Customer Papers

In this paper, the FE thermal analysis of the arc welding of a typical P92 pipe is presented. The two parts of the P92 steel pipe are joined together using a dissimilar material, made of Inconel weld consumables, producing a multi-pass butt weld from 36 circumferential weld beads. Following the generation of the FE model, the FE mesh is controlled using Model Change in Abaqus to activate the weld elements for each bead at a time corresponding to weld deposition. The thermal analysis is simulated by applying a distributed heat flux to the model, the accuracy of which is judged by considering the fusion zones in both the parent pipe as well as the deposited weld metal. For realistic fusion zones, the heat flux must be prescribed in the deposited weld pass and also the adjacent pipe elements. The FE thermal results are validated by comparing experimental temperatures measured by five thermocouples on the pipe outside surface with the FE temperature history at corresponding nodal points.

Customer Papers

This paper describes the application of the newly developed Abaqus 2D Weld Modeller to simulate the residual stress field in ferritic weld test specimens. The specimens were manufactured for an ongoing research programme in conjunction with The University of Manchester and Serco Assurance. The specimens modelled were autogenously welded plates, an eight-pass groove welded plate and a seven-pass ring weld disk.

Customer Papers

Several chemical reactions are able to produce swelling of concrete for decades after its initial curing, a problem that affects a considerable number of concrete dams around the world. Principia has had several contracts to study this problem in recent years, which have required reviewing the state-of-the-art, adopting appropriate mathematical descriptions, programming them into user routines in Abaqus, determining model parameters on the basis of some parts of the dams’ monitored histories, ensuring reliability using some other parts, and finally predicting the future evolution of the dams and their safety margins.

Customer Papers

The automotive industry has increased significantly the use of advanced high strength steels (AHSS) in many structural components, with the aim to reduce weight and also to increase safety. The high resistance of these steels is accompanied by a decrease in formability, which makes simulation a requirement to adequately foresee the formability of a particular stretch formed component. This work shows that Abaqus can be used in the cold stamping calculations, by mainly estimating the occurrence of rupture and necking during forming.

Customer Papers

Some cases of loading were studied through Abaqus/Standard Analysis in order to validate the finite elements model according to the physical tests results made in marine hoses to transport oil considering several situations, such as reeling of the marine hose line in reel during the period of disuse and under hydrostatic pressure conditions. After validating the models, automated process of analysis were developed through the creation of plug-in in the interface Abaqus/CAE and the integration of Abaqus/CAE, Abaqus/Standard and Excel in the software Insight. These automated processes of analysis allow Abaqus to become an important tool in the marine hoses development, and also allow the Development and Research Engineering to analyze virtually several configurations before producing the prototype, reducing the costs of about millions of dollars.

Customer Papers

Bird strike events are a potential dangerous problem faced by flight safety nowadays. These events are usually simulated through numerical approaches due mainly to the technical difficulties and high costs associated with experimental tests. Definition of structures within appropriate non-linear finite element codes is now well known and developed, however, bird models vary considerably between workers. Differences in density, shape and aspect ratio are easy to see. Differences in mechanical properties are not as transparent. Unless data to define analytical birds can be justified against viable sources, it is unlikely that certification of structures by analysis alone will be successful. Similar thoughts apply when considering substituting real birds for synthetic birds in testing.

Customer Papers

It is sometimes necessary to strategically place temporary checkpoints in theatre. One such tool for creating an effective checkpoint is a deployable spike strip. One fault of the current system is that puncturing and deflating the tires may not be sufficient to bring the car to a halt. The U.S. Army proposed a request for improvement to design a new spike strip that actually causes the vehicle to come to a stop once the deployed system is rolled over. Tests of this new system are both costly to run and time consuming. A finite element simulation of the proposed system was created in Abaqus/Explicit to provide insight into how the system operated. Once set up, the model could then be used to down-select between subsequent iterations.

Customer Papers

In this paper, we present the workflow starting from the structural information through the FE mesh creation and population of its properties to the final 3D finite element based geomechanical modeling. The resulting 3D stress field around salt structures helps to significantly improve the wellbore stability predictions. The workflow described provides an efficient way to create realistic 3D finite-element simulations from complicated structural data. It is optimized for the best resolution around the area of interest (well trajectory) while limiting the size of the numerical problem to an order that can be handled in reasonable times.

Customer Papers

During the last twenty years, composite materials have gained great popularity in many applications such as aerospace, naval and wind turbines. Despite their wide use, the behaviour of composite materials still needs to be thoroughly investigated, especially during and after failure. Only a deep knowledge of these phenomena could maximize the benefit achieved by their use. Many failure criteria have been published in the last thirty years. Among them, the three-dimensional criteria (considering also the out of plane stress) have received particular attention. The present work has focused on the implementation of threedimensional failure criteria (Puck and Hashin 3D) in the commercial Finite Element program ABAQUS, using a USDFLD subroutine.

Customer Papers