SIMULIA 리소스 센터

Eddy Currents Model Construction

Tech Notes

Quarter Wave Transformer Model Construction

Tech Notes

Wire Dipole Antenna Model Construction

Tech Notes

Hollow Rectangular Waveguide Model Construction

Tech Notes

Two Charged Spheres Model Construction

Tech Notes

Wilkinson Power Divider Model Construction

Tech Notes

Helmholtz Coil Model Construction

Tech Notes

Load Measurement And Linear Dynamics

Customer Papers

Lightweight design of trucks enables to increase the payload and represents a way to reduce the fuel consumption per transported weight. Many engineers around the world are focusing on this topic. One idea to handle this issue is to combine several vehicle parts or functions in an integrated module. This contribution shows the development of a cross member made of a combination of continuous fiber reinforced plastic and steel. Beside the function as an important structure of the truck main frame, the part represents a liquid/CNG reservoir at the same time. The management of design issues, the assessment regarding stiffness and strength was the major focus of the project.

Customer Papers

In sharp indentation of brittle materials, a complex three-dimensional stress field evolves in the material beneath the indenter and may cause cracking. During unloading, a tensile residual stress field drives the crack to its final semi-elliptical shape. The so-induced crack can be used for e.g. crack growth experiments, but for which the initial crack size and shape have to be known. For the analysis of the crack evolution in a material subject to a complex stress field, which changes with position, time and crack advancement, the extended finite element method (XFEM) represents a useful tool.

Customer Papers

SFE 2015 SFE CONCEPT Release Announcement

Customer Papers

The maximal dynamic stresses on turbo machinery blades used for predicting end of life due to high cycle fatigue (HCF) are obtained from the correlation between an FE modal analysis and dynamic strain measurements. Still today it is rather common to use sets of strain gauges to measure the dynamic strains. A particular challenge in preparation of blade vibration measurement is the selection of locations and directions for strain gauges to be mounted, for capturing dynamic blade behavior of various mode-families.

Customer Papers

EMI/EMC란?우리는 일상생활 속에서 전자제품들이 저절로 켜지거나 꺼지는 상황들, 차량에서 핸드폰을 이용하여 통화할 때 스피커에서 “지지직-“ 거리는 소리가 들리는 상황 등을 경험하곤 합니다. 이런 일들이 발생하는 이유는 전기·전자 기기를 사용할 때 전파되는 원치 않는

기사

Bringing a new generation of cars onto the road requires new solutions...

Article

5G is a buzzword that has been going around for years, but...

Article

안녕하세요 다쏘시스템코리아 SIMULIA 브랜드팀입니다.이번 포스팅은 Abaqus/Explicit의 해석 결과를 Abaqus/Standard에서 불러와서 해석을 수행하는 스프링백 해석에 대해 소개해 드리겠습니다. Abaqus는 Abaqus 해석들 사이에 변형된 형상과 관련된

기사

This article was originally published in the June 2019 issue of SIMULIA...

Article

With the rise in hybrid and electric vehicles, it’s important to consider...

Article

Powered by SIMULIA’s best-in-class Lattice-Boltzmann physics, DigitalROCK provides the first reliable, predictive technology for...

Article

You hear and read a lot about autonomous driving, wireless communication, the...

Article

The following article appeared in our 2017 annual report. We are sharing...

Article

Want to learn more about SIMULIA’s fluid solutions and capabilities including PowerFLOW?...

Article

The National Additive Manufacturing Innovation Cluster (NAMIC) Summit in Singapore addresses trends...

Article

This is another blog post in our SIMULIA Talks series where we...

Article