Centre de ressources SIMULIA

Mechanical design of products like mobile phones is a difficult task due to the sheer number of components and design decisions. In order to ship a high quality product, teams manage every little dimension, round, tolerance gap and material choice. Finite element simulations have proven over time to be an unmatched tool in its ability to avoid failures and aide in the design process. This is especially true when designing for drop events, which can be catastrophic. Finite element analysis tools allow us to simulate these types of events and optimize the design to improve the probability of survival. In some regions of the world, network carriers require certain minimum reliability performances to ensure low field failure rates. It is our goal as simulation engineers to ensure we not only meet these specification, but we provide unmatched quality and reliability to our customers around the world.

Customer Papers

Understanding the kinematic and contact mechanics for in vivo specific patient has dictated the success of current total knee replacement (TKR) prostheses. In this paper, an in vivo predicting method to analyze kinematic and contact mechanics within specific TKR knee joint has been proposed and experimentally verified based on concurrent dynamic finite element model (FEM) and patient-specific musculoskeletal (MS) technology, which was achieved by the commercial software Abaqus and Isight from Dassault Systemes. The hybrid MS model was built mainly including three parts, namely cadaver-based MS model, subknee model and deformable FE prosthesis model, based on CT images.

Customer Papers

The model quantified limited cluster stimulation, the activation of a complex NF network, and fluid infiltration depending on the stimulation scenario, wellbore pressure drop, randomly distributed perforation lengths, and fracturing fluid viscosity. The complex stimulation patterns is featured by further control on cluster stimulation in the sequential fracturing case compared to the simultaneous case especially in the presence of non-uniform shaped-charge perforations. This improved model enhances the reliability on numerical simulations for hydraulic fracturing design.

Customer Papers

Dynamic simulation methodology of a half-toroidal IVT variator system using a traction drive was developed. The rheological properties of a traction fluid dependent on surface pressure, sliding velocity, and contact surface temperature were identified from four-roller test apparatus by considering Hertzian pressure distribution on traction surface. Since a half-toroidal CVT variator system was required to analyze simultaneously the vibration, deformation, and contact behavior, Abaqus/Explicit solver was used. Additionally, this approach provides arbitrary control of the variator speed ratio, a mechanical sensor-less control logic that combined a state estimation observer with feedback control was also coupled with the solver. These methods made it possible to quantify the torque capacity and power transmission efficiency of a half-toroidal variator, and also enabled visualization of the friction force spinning behavior on traction surface.

Customer Papers

A COMPUTATIONALLY EFFICIENT AND ACCURATE LUMBAR SPINE MODEL

Solution Briefs

This presentation is focused on in-car vibrations and shows how KONE uses ABAQUS in the chain of multi-physic computation. The ride comfort depends on the elevator design, running parameters, installation quality and the building behavior. From finite element point of view the important issues that induce guide rails variable movement are: misalignment of the guide rails which typically are in the range of millimeters with a 10 cm distance between the peaks and lengths over 500 meters, suspension, compensating and travelling ropes introducing variable mass acting on the sling as a function of car position, air-flow induced forces caused by the counterweight passage at high speed and sway shape and magnitude of the building.

Customer Papers

To obtain sufficient accuracy for vehicle dynamic performance simulation, it is necessary to consider bushing amplitude and frequency dependency as well as preload effects in the rubber bushing model. FE models are capable of reproducing these characteristics though it is difficult to obtain sufficient calculation accuracy within practical computation time. This paper proposes a new low DOF bushing model by utilizing the user subroutine functionality of Abaqus. The new bushing model exhibits high computational performance while maintaining precision.

Customer Papers

As automation becomes more widespread across many industries, predicting and fine-tuning complex machine behavior is increasingly critical for optimizing performance. International engineering software provider Digital Product Simulation (DPS) was looking to develop a methodology for simulating the interaction of electronic controls with factory hardware.

Tech Notes

Metal Big Area Additive Manufacturing (mBAAM) is a new additive manufacturing (AM) technology based on the metal arc welding. A continuously fed metal wire is melted by an electric arc that forms between the wire and the substrate, and deposited in the form of a bead of molten metal along the predetermined path. Objects are manufactured one layer at a time starting from the base plate. The final properties of the manufactured object are dependent on its geometry and the metal deposition path, in addition to depending on the basic welding process parameters.

Customer Papers

The balance shaft clamping bolts in the recent engines tend to have the loosening problem by increased engine power. In this paper, a CAE procedure is introduced to predict loosening angle of bolts, wear, durability of the drive shaft. The procedure is performed through two analysis steps. In the first step, the multi-body dynamic simulation is used to obtain more accurate loading boundary conditions applied to the finite element model for the following step. Next, the finite element analysis is performed to predict the durability of the drive shaft through the calculation of the safety factor. Through this CAE procedure, design guidelines leading up to good BSM reliability has been obtained as a result of this activity.

Customer Papers

Selective laser melting (SLM) leads to high cooling rates and correspondingly high residual stresses, which can distort the printed part on the printing platform and even lead to part cracking and consequent print failure. The temperature profile and cooling rates during the SLM process are influenced by the surrounding powder bed and building platform, which can act as a significant heat sink depending on part design and platform arrangement. The new functionality of the Abaqus additive manufacturing simulation framework allows for separate modelling of solid (laser exposed) material, powder bed (not exposed) and platform (not exposed), as well as evolving heat transfer surfaces for the AM part. In this paper we highlight the influence of the surrounding powder bed and platform on the thermal characteristics of the printed part.

Customer Papers

In this study a 3D finite element model of the skull is created using CT scan data. All complexities of the skull geometry are simulated using ABAQUS. This numerical model is then subjected to frontal, lateral. vertical, occlusal and angulated impact conditions. Impact analysis is done and weak areas susceptible to fracture and hence failure are identified. Further fracture fixations of various designs and materials used in craniofacial fracture fixations are placed in different fracture situations in the virtual model and subjected to different impact conditions. This will enable the study of fracture and stability of the fracture of the skull under cranio facial fracture conditions.

Customer Papers

Welcome back to the continuation of our podcast! This next series focuses...

Article

According to the Bureau of Labor Statistics, the field of application engineering...

Article

Aircraft noise pollution remains an issue for the millions of people worldwide...

Article

Reliable operation to specification of communications systems, navigation equipment and RADAR detection...

Article

5G technology is starting to appear in a few cities and on...

Article

In 1903, the Wright Brothers successfully completed the first airplane flight, ushering...

Article

“Economy” is a popular term. The economy and its fluctuations affect everyone,...

Article

The climate change situation is getting ever more serious, as experts warn...

Article

Bringing a new generation of cars onto the road requires new solutions...

Article

5G is a buzzword that has been going around for years, but...

Article

This article was originally published in the June 2019 issue of SIMULIA...

Article

With the rise in hybrid and electric vehicles, it’s important to consider...

Article