Centro de recursos de SIMULIA

The paper describes using of Abaqus for evaluating the behavior of car plastic parts which are exposed to high temperature and self weight (plus another load) for long time. Car plastic parts (inside and outside) are subjected to complex loads – temperature, vibration and environmental conditions. It is a challenge to prepare simulations which correctly describe the complex behavior - temperature dependent, time dependent of stress-strain behavior. To capture visco-elastic behavior we chose a creep description of the material.

Customer Papers

Regarding FEM for welded structures, shell elements are mostly used to capture the structural behavior very efficiently. Depending on the choice of the element order, mesh size, etc. local nominal or even hot spot stresses can be calculated. These values can be assessed directly according to typical standards, i.e. Eurocode, DVS, FKM-Guideline etc. In our contribution we will present a method, which allows an efficient fatigue assessment of welded structures, based on deriving relevant stress quantities from the results of continuum models. This method has been implemented in the commercial software LIMIT for typical standards.

Customer Papers

Three-dimensional woven composites that are becoming increasingly popular in aerospace applications have superior through-the-thickness strength, stiffness, and thermal conductivity compared to conventional 2D laminated composites. However, despite their advantages, many details regarding the mechanical behavior of 3D woven composites are not as well-known as they are for traditional laminated composites. Microcracking of carbon-epoxy composites during resin curing is one important example. The main goal of this study is to improve the understanding of cure-induced microcracking through the development of realistic numerical models validated with experimental data.

Customer Papers

Abrasive wear of tillage tools by hard soil particles is a major concern in the agricultural industry. Previous efforts to understand the effect that various factors such as the soil composition and the tool material have on tool wear have been primarily experimental in nature. Since a large number of factors influence tool wear during tilling operations, it is impractical to expect the experimental studies to be exhaustive. The finite element method offers an additional tool that can be used in conjunction with experimental studies to further the understanding of wear in tillage tools. In this paper, preliminary results from a numerical study undertaken to study abrasive wear of tillage tools by soil particles are presented.

Customer Papers

This study is focused on analysis of post-repair behavior of composite structures. The objectives are to a) develop efficient computational approach for repaired areas, capturing processes of both damage initiation and growth; and b) demonstrate it in Abaqus on representative examples of composite repair designs. The approach is based on cohesive elements (CE), and the robust nature of generated numerical predictions is shown. Thus, the approach provides a very convenient FEA implementation and, on the other hand, can generate sufficient accuracy for repair-related design and service decisions. Results of parametric studies are presented for selected cases to demonstrate sensitivity of damage tolerance of repaired zones to input parameters.

Customer Papers

Unified analysis platform is the core value for SIMULIA Abaqus with realistic simulation. This paper demonstrated a successful integration of design process with various design requests where CEL dominated slamming wave impact transient analysis, CFD deal with ventilation and thermal analysis, and CMA was in charged with composite structure layup and manufacturing process management. This unified platform dramatically decreased yacht design cycle time and brought highly accurate simulations with complex physical problems.

Customer Papers

In this paper, we discuss applications and impacts of the new beam to beam contact capability from Abaqus V6.13 to industries – in particular to the medical device and automotive industries. The applications that we interested in the medical device industry are bending simulations on the implantable leads, specially, bending simulations on coils and multi-strand cables. The applications in the automotive industry include simulations on bending of electrical cables, wires, and wire bundles. Being able to accurately and fast model the stress or strain to the coil filar and cable strand level for the problems above are important for design engineers to predict the field performances and reliabilities of the products in both medical device and automotive industries.

Customer Papers

In the work is presented new numerical-analytical approach for the static analysis of composite materials filled by inclusions with various geometrical form and mechanical properties essentially distinguish from the properties of the matrix. It is considered two basic cases of spherical and prolate spheroid inclusions, which can contain additional interface layers. For this problem it was developed analytical method for a two-scale analysis of composite construction (micro- and macro-level) under SIMULIA Abaqus.

Customer Papers

Weight reduction of components and systems is of utmost importance in Aerospace industry. Reducing weight translates into higher performance and lower fuel consumption. In this paper we identify two components as candidates for weight reduction. In order to achieve this goal without sacrificing the current performance of these components we use ATOM optimization software within Abaqus environment. Current geometry models are simulated with the specified load cases to establish a baseline performance in term of stiffness and stresses. We then generate design envelopes representing the available space for topology optimization.

Customer Papers

Aluminum Wheel Impact Test (13 Degree Lateral, SAE J157) is the way in order to guarantee the aluminum wheel strength. CAE Team in Hyundai Motor Company has been carrying out the wheel impact test analyses using CAE (Abaqus/Standard), and developing the accuracy of analysis results by comparing with the tests. In this study, aluminum wheel impact test analysis will carry out with test jig model. And we’ll use dynamic implicit analysis (Abaqus/Standard) in order to simulate the rear impact test.

Customer Papers

Advances in computational technologies allow further improvements regarding the efficiency of the preliminary design phase. Specialized softwares enable the integration and the optimization of a process flow with the scope of reducing time and costs while significantly improving product performance, quality, and reliability. This work consists of an Isight application with the aim of automation and optimization of a structural design process of the SAR Plate Assembly. The multiobjective optimization problem that regards this specific helicopter component is handled through the use of 4 different genetic algorithms.

Customer Papers

Because of its high viscosity in melted state, PTFE powder is typically sintered first as large billet, from which parts are machined such as films, seals, etc. In large industrial sinter billets that can reach beyond 1-2 meters in size, PTFE's low thermal conductivity and large crystallization volume change could introduce significant residual stress during cool down from sinter temperature, resulting in billet cracking and difficulties in the subsequent machining step. FEA models were developed to predict the residual stress in the billet for a given temperature profile.

Customer Papers