Centre de ressources SIMULIA

Polymeric materials are complex in their mechanical behaviour; inter alia, they exhibit large strain, anisotropic and irreversible response which is often accompanied by stable localized necking behaviour. When developing suitable computational models for such materials, one cannot do this without the underlying support of a FEM program that offers inherently non-linear solution capabilities.

Customer Papers

In this study, the optimization software, Isight is coupled with current state-of-the-art computational fluid dynamics (CFD) simulations of in-cylinder mixture preparation to automate the spray pattern optimization for an engine combustion system. The spray pattern is automatically adjusted to minimize the fuel vapor stratification and liquid wall wetting in the cylinder at three different operating conditions. Mixing homogeneity has been achieved by using the optimized spray pattern. No significant increase of wall wetting is observed.

Customer Papers

Application of the CAE is needed to obtain optimized performance of the air spring under the consideration of many design factors. This Paper presents a method for estimating the durability of the air spring by applying it to the suspensions of a vehicle. We developed FE analysis techniques based on Abaqus, which enables us to evaluate and enhance the durability of the air spring at the initial design stage. Also, we validated the results by applying it to a mass production vehicle.

Customer Papers

In this paper, we discussed the application of impact analysis of aluminum wheel. The analysis model consisted of aluminum wheel and tire structure. The tire structure model was naturally inflated with pressure by Abaqus/Standard, and the results of implicit analysis were imported to Abaqus/Explicit for the dynamical impact analysis afterward. Both results of 13 and 90 degree impact analyses were compared with the experimental data; the performance and accuracy were examined.

Customer Papers

Automatic Storage and Retrieval Systems (ASRS) are computer-controlled systems for handling products in storage facilities with minimal manual labor. The combination of densely stored goods, height of structures, large number of interconnected racks, and tight geometrical tolerances raises concerns of structural damage to the system when exposed to elevated temperatures. Structural damage of this type could potentially lead to long down-times while the affected unit is being repaired or loss of building integrity when the rack is part of a building’s structural support. The behavior of typical single- and multiple-row ASRS racks was investigated.

Customer Papers

We simulated the Defense Threat Reduction Agency (DTRA)-sponsored Jointed Limestone Test (JOLT) using the Abaqus fully coupled Euler-Lagrange computation scheme. JOLT was a small-scale experiment consisting of over 37,000 individual cubes of limestone surrounding simulated tunnels. This test bed was loaded with ground shock generated by a spherical Comp B charge, thereby providing data for the study of computer codes used to compute the response of buried tunnels to explosive loading. We modeled the cubes as continuum blocks with contact, making for a dis-continuum simulation using a hybrid continuum code including Eulerian modeling of the explosive region and Lagrangian modeling of the remainder of the test bed. This paper has been approved for unlimited release under LA-UR-14-20056.

Customer Papers

The non-linear mechanical response of thermoplastics, rubbers, foams, and biomaterials can be challenging to accurately represent in a FE simulation. Recent versions of Abaqus/Standard and Abaqus/Explicit support a number of different viscoelastic and viscoplastic material models, including the new Parallel Rheological Framework model. These material models can provide accurate predictions of the response of different material classes, but in many applications it can still be challenging to select an appropriate material model and to calibrate it to experimental data. This paper discusses what experimental data is necessary to use these models, illustrates the importance of model validation, and demonstrates how the material models can quickly be calibrated using the MCalibration software.

Customer Papers

Using recently developed benchmarks, the performance of the eXtended Finite Element Method (XFEM), as implemented in Abaqus/Standard, is assessed and its main features highlighted. Subsequently, a strategy is proposed to model delamination migration using Abaqus/Standard that combines: the Cohesive Surface (CS) formulation and/or the Virtual Crack Closure Technique (VCCT) to model delamination with XFEM to capture migration. Finally, the proposed strategy is applied to model the Delamination Migration (DM) test and the results obtained are compared to experiments.

Customer Papers

The study of large and complex structures that involve multiple bodies functioning kinematically together have been rather challenging until recent technological advancements were found. When one was faced with such a task, the most viable way to proceed was to make use of simplicity and assumptions to conduct analysis at the component of interest. In what is called “system-level” simulation, all components of a given structure or system are taken into consideration in the analysis, thus reducing the yield of error in the theorization of your model. Such analysis method must be used when studying the phenomena of tread wear in a rubber track as it rolls over an undercarriage type-motion system.

Customer Papers

To evaluate if a crack might cause a structural failure, the crack front stress intensity is needed according to engineering standards like API 579-1/ASME FFS-1. The objective of this paper is to describe how the computed crack front stress intensity can be validated by using two separate approaches with Abaqus/Standard. This paper examines the details of modeling a crack located at a material boundary in a nozzle component, including the effect of different modulus values on the computed stress intensity. Being able to compute the stress intensity two ways and get the same value gives confidence that the mesh is sufficient to model the crack and provide accurate values for the fracture assessment.

Customer Papers

The DWH oil spill was the largest offshore oil spill in United States history. A Joint Investigation Team (JIT) of the Departments of the Interior (DOI) and Homeland Security (DHS) was charged with investigating the explosion, loss of life, and blowout associated with the DWH drilling rig. Det Norske Veritas (U.S.A.), Inc. (DNV GL) was retained to perform a forensic investigation into the technical root causes of the inability of the blowout preventer to kill the well. This paper describes the overall investigative process and the specific role that finite element analysis and simulation played in the forensic investigation.

Customer Papers

The objective of this study was to develop a test method, using typical mechanical testing equipment, which would match the musculoskeletal loads on the calcaneus bone during gait. This study used the AnyBody Modeling System Foot Model to determine muscle, ligament, and joint contact forces during gait. Abaqus input files were created which contained all loads in the model as a function of gait. ScanIP was used to process the tessellated calcaneus, model a Sanders IIb fracture pattern, and generate an Abaqus mesh. The DePuy Synthes 3.5mm Locking Calcaneal Plate and corresponding screws were assembled to the calcaneus in Abaqus/CAE. The model was run using the Abaqus/Standard implicit solver.

Customer Papers