CadMakers used Dassault Systèmes’ 3DEXPERIENCE platform on the cloud, including Design for Fabrication industry solution experience (CATIA) and Optimized Planning industry process experience (DELMIA) to virtually model and simulate construction.
CadMakers Virtual Construction understands that the construction of a building is a small percent of the total cost of ownership, compared to maintenance of the structure. The company thinks it’s just as important to efficiently plan for maintenance as it is to build a structure, which is why CadMakers takes a holistic view of the AEC process.
“People have thought that you cannot use manufacturing best practices in AEC because everything is different in our industry,” explained Javier Glatt, co-founder and CEO of CadMakers, a service company built to streamline the AEC industry and has executed 35 projects worth over US$3 billion in construction value since early 2014. “But new technologies, such as the 3DEXPERIENCE® platform on the Cloud, are enabling this industry to automate processes and create a lot of value.”
New technologies, such as the 3DEXPERIENCE platform, are enabling the AEC industry to automate processes and create a lot of value.
Opposed to the typical multi-page set of 2D drawings used by construction project managers, CadMakers shows its clients highly detailed, accurate 3D models early in the building process, which increases efficiency.
“The difference between working in 3D and 2D is powerful, ”Glatt said. “Roughly 30% of the problems or risks we identify in a given project result entirely from the fact that we’re able to view the building and its systems in an integrated, 3D model.”
The difference becomes clear to CadMakers’ clients when they get to share the 3D building model created with the 3DEXPERIENCE platform. “The 2D architectural drawing is one page, the structural drawing is another, and various building systems are on subsequent pages,” said Ryan Yee, project modeling designer, CadMakers. “But when we use the CATIA application, the 3D building model is right in front of you and that’s where the value is. You can be very clear: ‘here are the ducts, here is the wall, here is the ceiling, and this is why your duct is below the ceiling.’”
“The recent increase of project teams using Building Information Modeling has created new silos, with an uneven adoption of technology amongst teams, adding complexity to traditional project procurement methods,” Glatt said. “Integrated project delivery methods will become more important to drive efficiencies on complex projects. In this new world, prefabrication and manufacturing processes will be critical to maximizing value to owners.”
The freedom to share the 3D building model throughout a project’s team is a key reason that CadMakers chose the 3DEXPERIENCE platform.
In work for UBC Properties Trust, who optimizes the University of British Columbia’s land assets, CadMakers uses a 3D model to serve in a quality assurance/quality control capacity. Glatt says the project team at UBC likes to get everyone — the project’s architect, engineers and various subcontractors — in a room together to view the model and crowdsource solutions to potential problems.
It doesn’t take long for everyone to drill down to their own concerns. “An electrician had us zero-in on one area of the model. ‘OK,’ he says, ‘how much clearance do I have to get through this shaft? If there’s a duct there, how am I going to get my conduit in there?’ We were solving those problems in real time,” Glatt said.
The real value in such reviews, he adds, is combining the hands-on expertise and experience of construction industry veterans with the visualization provided by the 3DEXPERIENCE model. A veteran electrician or plumber doesn’t need to learn to manipulate the model, however. “We’ll do the heavy lifting, but we need the construction veterans to be the brains behind it all,” Glatt said.
“We ask him, ‘how close can we get these pipes together? What about hangers? Flanges? Valves? How are you going to actually install this and in what order?’ So we get that veteran expertise and we’re capturing it to shape the model in real time.”
With the DELMIA application, the 3DEXPERIENCE platform enables users to move beyond a static model and show clients how the building components will be assembled together.
“When you build the 3D model, you have all of the parts and pieces there, every nut and bolt, but you may not think through the complexity of construction,” Yee explained. “Using DELMIA, you can see piece-by-piece, assembly-byassembly, the sequence and processes of construction.”
That has real benefits on a complex job site. It provides informed decisions about when materials and assemblies are delivered to the job site, and where they are placed on the site in relation to the crane, as it can only pick up so many items in a day. Using the 3DEXPERIENCE platform to connect the value chain through all of the suppliers and subcontractors, the general contractor can optimize deliveries and minimize bottlenecks on the job site.
“Where you put the crane is very important, as it dictates process and flow,” Yee said. “With DELMIA, you can visualize which tasks need to be prioritized, and which can be scheduled in conjunction with others. That improves efficiency to shorten the construction timeline.”
Within the 3DEXPERIENCE platform, the CATIA application enables users to design piping, tubing and Heating Ventilation and Air Conditioning (HVAC) systems from concept through detailed manufacturing. Moreover, users can build intelligence regarding the new system into the 3D model.
“Let’s say you add an elbow to the HVAC system. That changes the friction in the system, which in turn changes the fan specs,” Yee explained. “In CATIA, when you add elbows you can link them to the standards of your entire HVAC model, and it will identify what fans or valves you’ll need when you change the design.”
A new piping interface and platform lets users place specific elements in defi ned locations. Users select the equipment, supports, hangers and more; then CATIA creates the route. “You know the pipe is going from point A to point B, so why should you do all the leg work to route it when the software will do it for you — and probably do it better?” Yee asked.
The bottom line, he continues, is that CATIA enables users to identify issues in a plumbing or HVAC design and resolve them before the system gets to the worksite.
Glatt believes the 3DEXPERIENCE platform has a definitive competitive advantage: its data-driven, model-based architecture delivered by ENOVIA applications seamlessly connect business processes. This architecture, he argues, enables users to leverage the 3D model in new ways. One prime example is the long-term facility maintenance and management that occurs long after architects, engineers and construction crews leave the site.
“When the project is turned over to operations and maintenance staff, are they going to have the expertise and know-how to manage new wastewater systems and complex mechanical systems in a building?” Glatt asked rhetorically. “Wecan design new technologies into buildings, but can we operate them for the next 50 years? That’s where the ENOVIA architecture of the 3DEXPERIENCE platform on the cloud can be extremely powerful.”
The metadata behind a 3DEXPERIENCE model, Glatt explains, includes every pump, fi lter and substructure in an easily searchable form. It can even include warranties and maintenance schedules for all of the building systems.
As a result, high quality building maintenance and operation can be built into the project from the start, rather than relying exclusively on the skills of a maintenance staff that learns a building’s idiosyncrasies over time. Sooner or later, members of that maintenance staff will retire, so their experience and specific building knowledge will be lost; but content in the datadriven, model-based ENOVIA architecture will remain forever.
Combining their technological expertise with the3DEXPERIENCE platform to power its virtual design and construction business has been the crux of CadMaker’s success.
“We believe in solving problems using technology, and we believe the 3DEXPERIENCE platform may be the most powerful software available to our industry today,” Glatt said. “It’s an excellent match for very large, complex projects. You don’t just have an architectural model, or a single building system. You have every mechanical, electrical and plumbing system right in front of you.
“In the 3DEXPERIENCE platform, Dassault Systèmes has created an amazing technical solution. It’s up to us to leverage its capabilities to solve real problems on the front lines of architecture, engineering and construction for our customers.”
CadMakers partners with leading architecture, engineering and construction companies to provide a range of virtual design and construction (VDC) services to enable smarter building. Services include 3rd party construction design and coordination review; constructability analysis; virtual design and construction implementation frameworks and protocols; enablement of mechanical prefabrication; concrete detailing packages; and shop drawing generation.
Revenue: Privately held
Headquarters: Vancouver, British Columbia, Canada
For more information www.cadmakers.com