DFMPro for 3DEXPERIENCE

HCL's ‘V6 xPDM Adapter for Teamcenter’ provides the process based integration to enable exchange of design, engineering data between Teamcenter and ENOVIA V6. It enables coexistence of Teamcenter and V6 based applications by ensuring synchronized data between the two systems.‘V6 xPDM Adatper for Teamcenter’ is built using native exchange interfaces of Teamcenter (SOA) and V6 (V6 xPDM Interfaces). The Adapter Solution supports bi-directional exchange of engineering data like parts, part revisions, relations metadata, documents and design data like product structure, CAD representation and visual representations.Organizations have critical need to integrate Teamcenter based PLM systems and ENOVIA V6 to better support collaborative processes like part management, change management and release management. However to achieve this collaboration, they are looking to minimize the investment in proprietary integrations that are costly and difficult to maintain. Geometric's ‘V6 xPDM Adapter for Teamcenter’ offers a ready-to-deploy yet extensible solution to address this requirement.For oganizations using CATIA V5 and Teamcenter to manage their design data, the Data exchange capabilities (PRODUCT scenario) of Geometric's ‘V6 xPDM Adapter for Teamcenter’ solution enables them to adapt CATIA V6 as CAD authoring tool. The Adapter Solution supports transfer of existing CATIA V5 data from Teamcenter (Product structure, CATPart, CATProduct) to CATIA V6 for carry-over and reference. Data authored in CATIA V6 can be transferred back to Teamcenter along with CAD representations, so that existing Teamcenter based processes for data consumption (DMU, manufacturing planning etc) are supported.Engineering data exchange (EBOM scenario) capabilities enable the bi-directional synchronization of engineering data between Teamcen

PARTNER SOLUTION

Cameo Connector for Polarion enables seamless collaboration between architecture models and data managed in ALM and delivers the capability to integrate product development for organizations using Polarion for Requirement Management and Cameo Systems Modeler for MBSE. This connector exposes Polarion ALM operations within the Cameo modeling tool, such as saving, updating, and revising. It also exposes architecture diagrams associated with models, simplifying data exchange without closing the Cameo System Modeler tool.Key capabilities of Cameo connector for PolarionCustomizable MappingDirect LinkingConnect to different Polarion ServersBi-directional TraceabilityRelationship ManagementVisualization of ALM data in embedded Polarion window in Cameo System Modeler

PARTNER SOLUTION

Cameo Connector for TeamcenterA collaborative tool to tie cross-product development togetherIn today’s Digital Era, with the transformation of conventional products to smart, connected and intelligent, the need for modernizing the product design and engineering methodologies is becoming inevitable to handle the complexities and scale. Model Based Systems Engineering (MBSE) approach combined with the overall Product Lifecycle Management (PLM) methods address the challenges of creating multi-disciplinary systems consisting of mechanical, electrical, electronic and software components.System modeling activities involve starting with system requirements and systematically decomposing those into functional and logical models, which are then linked to the downstream activities of detailed design and testing. This needs smooth exchange of data across the MBSE tools & product design and development tools (PLM). HCL offers a connector for seamless integration of MBSE tools with PLM tools.Recently, SysML, System Modeling Language from OMG, has emerged as an industry standard for MBSE. The need for integrating industry leading tools such as, Cameo Systems Modeler from Dassault Systèmes supporting SysML with PLM tools such as Teamcenter from Siemens is growing. HCL's “Cameo Connector for Teamcenter” delivers capability to integrate system modeling data and artifacts from Cameo Systems Modeler with Teamcenter ensuring the downstream connectivity of data and the bi-directional traceability across these tools.

PARTNER SOLUTION

HCL DFMPro is a powerful CAD-integrated solution designed to streamline manufacturability and assembly analysis during the product design phase. By enabling faster, more cost-effective, and optimized product development, DFMPro significantly enhances the design review process through automation. The tool offers a flexible environment where designers can easily configure prebuilt design rules to align with organizational standards and global best practices.DFMPro provides simple, accurate and robust design analysis, empowering designers to create higher-quality products confidently. With the HCL DFMPro platform, designers can innovate freely, knowing they minimize costly design errors that could impact downstream production. Ultimately, DFMPro helps ensure superior models by proactively identifying potential manufacturing issues, leading to better products and a more efficient development cycle.Key CapabilitiesAutomates the DFM Review Process:DFMPro automates and formalizes the design review processSeamlessly integrated inside DS CATIA V5 and also SOLIDWORKS®, PTC Creo Parametric and Siemens NX Rule Manager:Select and configure organization-specific guidelines as design rulesBring standardization to the design review processEnables Best Practice Knowledge Capture and Dissemination:Customizable framework to capture inhouse best practices, tribal knowledge, and industry standardsFacilitates continuous design improvements and knowledge retention of retiring workforceEasily Integrates into Existing Enterprise Infrastructure:Can be integrated with PLM, ERP, and MES systemsScalable framework for capturing and disseminating manufacturing knowledge upstream

PARTNER SOLUTION

eDrawings Professional for CATIA V5 is the first email-enabled collaboration tool to ease the sharing and interpretation of 2D and 3D product design data. It is a plug-in for CATIA V5 that allows users to publish files as read-only and ultra-compact (up to 95% compression) eDrawings files for visualization, collaboration, and design review.Publish your CATIA V5 files into ultra-compact eDrawings that are up to 95% smaller, making them easy to send by email. Generate accurate representations of parts (.prt), assemblies (.asm), and drawings (.dwg) that anyone can view, measure, section, and markup. Save eDrawings as EXE and ZIP, which includes the eDrawings viewer. No additional software is required to view eDrawings.

PARTNER SOLUTION

GeomCaliper for CATIA V5 is an innovative wall thickness analysis tool that facilitates measurement and checking of wall thickness on 3D models. GeomCaliper enables acceleration of the design review process for manufacturability. Unlike traditional measurement tools, GeomCaliper is fast and easy to use. Once you start using GeomCaliper, you’ll realize that checking thickness can be made really easy as well as quick. With click of few buttons designers can identify areas of design which are too thin or too thick immediately. This saves lot of time and results in improved performance, significant material savings and reduced processing cost.Salient Features: Ray and Rolling ball available for checking wall thickness Easy to locate critical thickness areas Advanced visualization for easy interpretation of results Ability to clip model at any section Dynamic thickness display at point click Compute thickness at selected region Integrated with major CAD systems Ability to ignore small thickness at edges Create Customized reports in XML / HTML format

PARTNER SOLUTION

Product designers and manufacturing engineers need to frequently carry out measurements to identify regions that are critical from strength, manufacturing, or material flow standpoint. Most often, thickness mapping and measurement is the basis of the study. "GeomCaliper on CATIA V5 - Advanced" is an innovative tool, integrated within CATIA, that facilitates measurement and checking of thickness on CATIA V5 3D models. Unlike traditional measurement tools GeomCaliper is a fast, and easy to use tool. The tool implements two prime methods of thickness measurement i.e. Normal Ray and Rolling Sphere. The user can select the analysis method depending on the geometry of the part for improved results.Salient Features: - Quick and easy-to-use thickness measurement. - Advanced visulization for easy interpretation of results. - Dynamic thickness display on model at point click. - Compute thickness at selected regions (feature and face selection).

PARTNER SOLUTION

“V6 xPDM Adapter for Teamcenter” is an integration solution for exchange of engineering data between Siemens PLM Teamcenter and Dassault Systèmes’ 3DEXPERIENCE Platforms. This solution enables implementation of collaborative product development processes spanning across Teamcenter and 3DEXPERIENCE.This solution is built using interfaces supported by 3DEXPERIENCE and Teamcenter platforms 3DEXPERIENCE xPDM Interfaces Teamcenter SOA InterfacesProduct is developed under Dassault Systèmes’ V6 APs Partner Program and Siemens PLM ‘s Foundation Partnership; thereby ensuring support for the latest releases of 3DEXPERIENCE and Teamcenter Platforms. Solution Benefits: Leverage existing investment and derive value by implementing business processes spanning best-of-breed applications Well-defined path for existing CATIA V4/V5 customers using Teamcenter to adapt 3D Experience platform Users have local access to all the design data. Incremental changes are propagated efficiently, thereby eliminating the need to reconcile entire structures. Transactions run in the background & Integration is transparent to the users. Data transfer based on triggers/workflow, integrating current business processes Users continue to work from their native environments Data transfer is based on process/maturity based model Eliminates data exchange errors that occur during manual/semi-automatic exchange of data Enables unified product reference across the enterprise

PARTNER SOLUTION

Manufacturing Hub. Worldwide product companies are embracing Digital Manufacturing as a strategic direction, to substantially increase productivity and reduce costs. While Digital Manufacturing can be utilized in a standalone manner, it gives best results when it is integrated into the PLM solutions deployed. This approach facilitates collaboration between the design and manufacturing streams, decreasing the cycle times and thus reducing the time to market and overall costs.Salient Features:- Supports concurrent engineering by integrating the product development process with the digital manufacturing processes.- Access to latest product information and configuration data in the Manufacturing domain.- Facilitates collaborative change management between Engineering and Manufacturing domains Manufacturing Hub Adapter supports integration with Siemens PLM Teamcenter platforms (Engineering/Teamcenter/Unified).

PARTNER SOLUTION

.

PARTNER SOLUTION

V5-xPDM Gateway is a turnkey solution providing customer proven, process-based integration between CATIA V5 and an enterprise PDM system via ENOVIA VPLM. For many customers, managing CATIA data using their existing PDM systems is an ongoing challenge - one that could impede productivity and slow growth. CATIA today provides more than just geometric, analysis and planning information. It also provides rich information on how the various engineering data relate to each other. For instance, when a part's shape is changed, CATIA knows how to recalculate the tool paths and finite element analysis. This concept is known as relational design. If the PDM system doesn't know how or where to leverage this relational information, the knowledge is either lost forever or buried within the files and cannot be used for insights into evolving designs, nor propagation of engineering changes. ENOVIA VPLM solves this problem by providing a collaborative product development environment that can fully leverage CATIA V5 relational design capabilities. However, what if an organization wants to continue using their existing enterprise PDM system? There must be away in which the relational product development environment, which manages critical in-work data, can harmoniously co-exist with the enterprise data management sustem that manages released data. V5-xPDM Gateway is the faster, most effiecient way to integrate the developmental environment of CATIA V5 and ENOVIA VPLM with the enterprise release environment. The first two supported systems are UGS Teamcenter Enterprise and Teamcenter Engineering. The integration is based on a scalable and high-performance, point-to-point architecture that takes into account industry best practices and processes, in addition to providing maturity-based data exchanges. As the exchanges run in the background, the transactions between the two environments are completely transparant to the end users, letting them carry on daily activ

PARTNER SOLUTION