PARIS, FRANCE, October 23, 2002 –Dassault Systemes (DS) (Nasdaq: DASTY; Euronext Paris: #13065, DSY PA), a worldwide leading software developer of product lifecycle management (PLM) solutions, today reported financial results for the third quarter and nine months ended September 30, 2002 and reaffirmed fourth quarter and full year revenue and operating margin objectives.
Acquisition costs include goodwill, technology amortization and other related costs. All financial figures in this press release are before these acquisition costs unless otherwise noted. Amortization of goodwill has ceased effective December 31, 2001. All financial information is unaudited and reported in accordance with US generally accepted accounting principles (US GAAP). In addition, all comparative figures are given on a year over year basis unless specified otherwise.
Total revenue in the third quarter was €175.9 million, representing a decrease of 2% compared to total revenue of €178.8 million in the 2001 third quarter. On a constant currency basis, total revenue increased 3%. Software revenue, representing 85% of total revenue, decreased 4% to €149.5 million, while services and other revenue, representing 15% of total revenue, increased 12% to €26.4 million in the 2002 third quarter. Recurring software revenue was 52% of total software revenue in the 2002 third quarter. Seats licensed in the quarter totaled 12,606, with 7,132 CATIA and 5,474 SolidWorks seats.
Process-centric revenue, including PDM revenue, totaled €145.5 million in the third quarter of 2002, broadly flat with the year-ago period (2001: €146.0 million) and represented 83% of total revenue. On a stand-alone basis, PDM revenue led by strong growth in both software and service revenues, increased 32% to €19.6 million, up from €14.9 million in the third quarter of 2001 and accounted for 11% of total revenue in the 2002 third quarter. PDM software end-user revenue totaled €27.6 million. Design-centric revenue, representing 17% of total revenue, decreased 7% to €30.4 million, compared to €32.8 million in the year-ago quarter.
Net income excluding acquisition costs was €24.3 million or €0.21 per share in the 2002 third quarter, a decrease of 16% on a per share basis compared to €28.3 million or €0.25 per share in the year-ago quarter. On a US GAAP basis, which includes acquisition costs, net income increased 46% to €22.0 million or €0.19 per share in the third quarter of 2002 compared to €15.1 million or €0.13 per share in the 2001 third quarter. The Company had a strong balance sheet with no long-term debt and cash and short-term investments totaling €397.3 million at September 30, 2002.
For the 2002 nine-month period, total revenue increased 6% to €549.7 million, compared to €520.8 million in the respective 2001 period. On a constant currency basis, total revenue increased 8% for the nine months ended September 30, 2002. Net income excluding acquisition costs decreased 7% to €82.8 million or €0.71 per share, compared to €89.2 million or €0.77 per share in the comparable 2001 period. On a US GAAP basis, which includes acquisition costs, net income was €75.0 million or €0.64 per share for the nine months ended September 30, 2002, up 60% compared to €46.6 million or €0.40 per share in the year-ago nine-month period. Year-to-date, 41,718 seats were licensed, comprising 24,112 CATIA and 17,606 SolidWorks seats.
Process-centric revenue, including PDM revenue, increased 7% for the first nine months of 2002 to €454.2 million (2001: €426.6 million). PDM revenue on a stand-alone basis increased 22% to €51.8 million (2001: €42.6 million) and Design-centric revenue increased 1% to €95.5 million (2001: €94.2 million).
Charles Edelstenne, Chairman of DS, stated, “Business conditions continue to be tough around the world. While DS is clearly not immune, our market leadership and winning brands, high level of recurring revenues and strong financial position have enabled us to show results that are comparatively better than most of our industry.”
Bernard Charles, President and Chief Executive Officer, commented, “We continued to make very solid progress on our strategic initiatives in PLM. Our PDM business has performed well throughout the year and this quarter was no exception. Led by ENOVIA, PDM revenue grew by 32%, exceeding our expectations. The introduction of new sales channels at SmarTeam is on track with IBM and SolidWorks, and is starting to ramp up. Digital manufacturing, with DELMIA, had a good quarter as customers continue to realize the significant benefits of our digital manufacturing software. Turning to CATIA, V5 sales continued to strengthen with new and long-standing customers and represented two-thirds of CATIA seats licensed in the quarter. The upcoming V5 Release 10 will further improve the entry PLM capabilities as well as performance and scalability for large accounts. And IBM continues to ramp up resources in accordance with our joint growth plan for addressing the significant opportunities in the PLM market. In summary, in spite of the sudden slowdown we encountered this quarter due to the economic environment, I believe we are positioned to increase our number one market share position in PLM during 2002.”
“The design-centric market has been more affected than our 3D PLM businesses by the weakness in business spending, as it is mostly focused on small and medium-sized companies. When economies around the world improve, we believe these same companies are likely to commence investment spending at the initial stages of a recovery. Based upon SolidWorks market leadership and robust software which is heavily used in production, we believe SolidWorks is well-positioned to be an early beneficiary of an improving business environment.”
Thibault de Tersant, Executive Vice President and CFO, commented, “Revenues came in modestly below that of the year-ago quarter, reflecting the weaker economic environment as well as the impact of the significant currency fluctuations and our new growth plan with IBM announced in July. In combination, currency changes and the new IBM royalty agreement resulted in a revenue reduction of approximately €13 million without which revenue would have increased by 6% during the third quarter.
“As we look to the fourth quarter, we are reaffirming the objective that we provided to the market in late September, where we stated that total revenue could equal or slightly exceed 2001 fourth quarter revenue of €225 million. On the expense side we are working diligently to monitor and manage our costs in order to maintain our operating margin at a stable level. We are meeting with good success here and believe our efforts position us to achieve an operating margin of approximately 36% in the fourth quarter, unchanged from the fourth quarter of 2001. In summary, we believe we are on target to meet our full year objectives of revenue growth of approximately 4% and an operating margin of approximately 27-28%.
“We are taking a very conservative posture with respect to 2003 at this point in time. We anticipate that current business conditions will persist through next year and as a result, our number one financial goal is focused on delivering a stable operating margin within an environment of modest annual revenue growth of 2-3% for the Company. ”
NEW PRODUCT LAUNCHES
SolidWorks, the leading company in the design-centric market , introduced SolidWorks 2003 to enable companies to significantly reduce design time, improve accuracy and bring products to market faster. Enhancements in SolidWorks 2003 will help users analyze the structural integrity of their designs, communicate design information easily to others, locate downloadable parts via online supplier catalogs and accelerate the design process with new modeling features.
Smarteam, a key component of DS’s PDM strategy , announced SmartBom Version 2.0, a collaborative Bill of Materials management solution. SmartBom 2 provides a comprehensive solution for electronic Bill of Materials creation, modification, comparison and exchange within the enterprise and across the supply chain. This new release enables manufacturers to easily manipulate product structure and incorporate their suppliers and OEM vendors into the various engineering change processes in a simple format, thereby driving greater market responsiveness and profitability.
Smarteam launched Smarteam for Electronics, a product information collaborative solution designed to coordinate product development between engineers, subcontractors, suppliers and customers in the Electrical and Electronics sector.
Smarteam introduced SmartGateway 2.0, a solution facilitating the bi-directional exchange of mission-critical enterprise data and processes. This new release expands SMARTEAM EAI connectivity, through universal standards to a broad range of enterprise systems.
Spatial, a market-leading provider of world-class 3D software components announced the release of several new products during the third quarter of 2002. In the area of interoperability, Spatial introduced 3D InterOpExchange and 3D Viz Exchange designed to provide the tools necessary to read and/or write standard and key 3D formats for any applications. 3D ACIS PHL (Precise Hidden Line) V5 was released, and is designed to allow Spatial’s ACIS partners to create fast, accurate 2D hidden line drawings of 3D models.
DS jointly with Airbus, a leading aircraft manufacturer, announced that Airbus has completed the first phase of a plan to streamline product development using CATIA V5. In less than 18 months, more than 50% of Airbus CAD activity migrated to CATIA. The second phase of the project is underway and includes the installation of over 2,000 CATIA V5 seats and the integration of Airbus’s entire design, development and manufacturing processes.
Electrolux Group, the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use, has selected CATIA V5 for the design, analysis and manufacture of its products. Electrolux will license 700 CATIA V5 seats. DS also announced that Electrolux has completed the installation of Smarteam at its United State’s manufacturing facility.
DS and ImpactXoft announced a strategic partnership to deliver advanced design collaborative and functional modeling solutions for 3D PLM. Initial deliveries will target process-centric applications for Electrical and Electronics, Consumer Goods and Industrial Machinery. The alliance includes the signing of a CAA V5 original software developer agreement. ImpactXoft is a private software company introducing innovative applications that change the way people and companies develop products.
Conference call information:
The Company will host a teleconference call today at 4:00 PM CET/3:00 PM London/ 10:00 AM New York. The conference call will be available via the Internet by accessing www.3ds.com . A replay of the conference call will be available until November 22, 2002 via the Internet by accessing www.3ds.com.
Statements above that are not historical facts but express expectations or objectives for the future, including but not limited to statements regarding the Company’s objectives for the fourth quarter 2002 revenue and operating margin, and 2002 revenue growth and operating margin and revenue growth in 2003, are forward-looking statements (within the meaning of Section 27A of the Securities Act of 1933, as amended). Such forward-looking statements are based on management's current views and assumptions and involve known and unknown risks and uncertainties. Actual results or performances may differ materially from those in such statements due to, among other factors: (i) currency fluctuations, (ii) global economic conditions, (iii) market demand for our products and services, (iv) new product developments and technological changes, and (v), our ability to recruit and retain skilled personnel. Unfavorable changes in any of the above or other factors described in the Company’s SEC reports, including the Form 20F for the year ended December 31, 2001, which was filed with the SEC on June 20, 2002, could materially affect the Company's financial position or results of operations.
Dassault Systèmes, the 3DEXPERIENCE Company, is a catalyst for human progress. We provide business and people with collaborative virtual environments to imagine sustainable innovations. By creating 'virtual twin experiences’ of the real world with our 3DEXPERIENCE platform and applications, our customers push the boundaries of innovation, learning and production.
Dassault Systèmes’ 20,000 employees are bringing value to more than 290,000 customers of all sizes, in all industries, in more than 140 countries. For more information, visit https://www.3ds.com