- Software revenue up 2% to €152.2 million and up 9% in constant currencies with total revenue up slightly to €176.3 million and up 7% in constant currencies for the third quarter
- Both CATIA and SolidWorks deliver unit seat growth, increasing 6% and 9%, respectively, in the third quarter
- U.S. GAAP EPS increases 26% to €0.24 and EPS before acquisition costs increases 19% to €0.25 in the third quarter
- DS reconfirms 2003 operating margin and EPS objectives; Revenue growth objective adjusted to 5% - 6% in constant currencies
- DS initiates preliminary 2004 revenue objective
PARIS, FRANCE, October 23, 2003 – Dassault Systemes (DS) (Nasdaq: DASTY; Euronext Paris: #13065, DSY PA), a worldwide leading software developer of product lifecycle management (PLM) solutions, reported financial results for the third quarter and nine months ended September 30, 2003.
Results for the Third Quarter Ended September 30, 2003
Software revenue results were solid in the third quarter, with software revenue increasing 2% as reported and 9% in constant currencies in comparison to the year-ago period. Software revenue, representing 86% of total revenue, was €152.2 million in the 2003 third quarter, compared to €149.5 million in the 2002 third quarter. Recurring software revenue continued to be a significant component of revenue and represented 56% of total software revenue in the third quarter of 2003.
Total revenue increased slightly year over year as reported and increased 7% in constant currencies. Total revenue in the third quarter was €176.3 million, compared to €175.9 million in the year-ago quarter. Services and other revenue, representing 14% of total revenue, decreased 9% to €24.1 million in the 2003 third quarter, compared to the prior year period.
Seat licensing activity, totaling 13,478 seats in the quarter, also showed good growth, with both CATIA and SolidWorks posting increases over the third quarter of 2002. Specifically, 7,537 CATIA and 5,941 SolidWorks seats were licensed, representing increases of 6% and 9%, respectively, over the year-ago period.
On a U.S. GAAP basis EPS increased 26% to €0.24 per diluted share in the 2003 third quarter compared to €0.19 per diluted share in the third quarter of 2002. EPS excluding acquisition costs increased 19% to €0.25 per diluted share in the third quarter, compared to €0.21 per diluted share in the third quarter of 2002.
On a U.S. GAAP basis, operating income increased 17% to €42.6 million in the 2003 third quarter, compared to €36.3 million in the 2002 third quarter. Operating income before acquisition costs increased 13% to €44.0 million, compared to €38.8 million in the year-ago quarter. The operating margin before acquisition costs was 25.0% in the 2003 third quarter, approximately three percentage points higher than the year-ago quarter where the operating margin was 22.1% before acquisition costs.
Process-centric revenue, including PDM revenue, totaled €146.0 million in the third quarter, slightly higher than the year-ago period, and up 6% in constant currencies. PDM revenue increased 9% to €21.4 million and increased 15% in constant currencies compared to the third quarter of 2002. PDM end-user software revenue totaled $29.2 million in the 2003 third quarter. Design-centric revenue totaled €30.3 million in the 2003 third quarter, level with the year-ago quarter. Design-centric revenue increased 11% in constant currencies and 14% in U.S. dollars. PDM revenue represented 12% and design-centric revenue accounted for 17% of total revenue in the 2003 third quarter.
The Company continued to have a strong financial position with cash and short-term investments totaling €429.1 million and no bank debt at September 30, 2003.
Results for the Nine Months Ended September 30, 2003
Total revenue was €527.0 million for the first nine months of 2003, compared to €549.7 million in the year-ago period, representing a decrease of 4% as reported, but an increase of 4% in constant currencies. Software revenue totaled €449.1 million in the 2003 nine-month period, representing a decrease of 6%, but an increase of 2% in constant currencies. Year-to-date process-centric revenue totaled €435.0 million, 4% lower than the year-ago period, but up 2% in constant currencies. PDM revenue for the first nine months of 2003 was €59.0 million, an increase of 14% and 22% in constant currencies in comparison to the year-ago period. Design-centric revenue totaled €92.0 million for the 2003 nine-month period, representing a decrease of 4%, but increases of 10% in constant currencies and 16% in U.S. dollars compared to the year-ago period.
On a U.S. GAAP basis EPS increased 6% to €0.68 per diluted share for the first nine months of 2003, compared to €0.64 per diluted share in the year-ago period. EPS excluding acquisition costs totaled €0.71 per diluted share for the 2003 nine-month period, level with the year-ago period where EPS was €0.71 per diluted share. Year-to-date 39,963 seats have been licensed comprised of 21,670 CATIA and 18,293 SolidWorks seats.
Bernard Charles, President and Chief Executive Officer, commented, “We set two key strategic priorities at the outset of 2003: First, to expand our number one market share position in PLM beyond the 21% achieved in 2002. And second, to improve our operating margin by up to 1 percentage point, while continuing to invest in our future as demonstrated by the 4% increase in our R & D headcount for this year. Based upon our performance year-to-date and our outlook for the fourth quarter, we believe we are well positioned to achieve these goals.
“DS made good progress in the quarter within a continued cautious spending environment on the part of our customers as demonstrated by our revenue increase of 15% when measured in U.S. dollars, outperforming the competition. CATIA V5 continued to gain traction among existing customers and the supplier network. Moreover, a clear highlight of the quarter is the fact that we are now also seeing the beginning of true PLM wins within the supply chain, including decisions by Bosch and Sanyo Machine Works. Version 5 Release 12 was introduced for CATIA, DELMIA, ENOVIA and SMARTEAM. At the heart of our new release is Collaborative PLM, enabling companies to move closer to becoming on demand businesses.
“New companies continue to join our CAA V5 partnership program, resulting in a broad offering of complementary solutions built on top of our V5 open architecture. Our partners number over 36 with the addition of Fluent and IGE+XAO this quarter. Today, we also announced a strategic software development agreement with Gehry Technologies to create and sell 3D collaborative solutions to the building industry based upon our CAA V5 development platform.”
Thibault de Tersant, Executive Vice President and CFO, commented, “The third quarter was marked by several highlights. Software revenue growth was in-line with our expectations, increasing 9% in constant currencies. Our continued focus on growing our operating margin through careful cost management met with favorable results, with a 3 percentage-point improvement over last year to 25.0% before acquisition costs. And earnings were solid, coming in ahead of our expectations. Services, however, did not meet our expectations, resulting in total revenue approximately €4 million lower than our objective when adjusted for actual currency rates.
“For the fourth quarter, we believe a revenue objective of about €225 million is appropriate as we continue to be cautious about the economic environment. For the full year, we are maintaining our objective for operating margin growth of up to 1 percentage point above the operating margin of 27.7% before acquisition costs achieved in 2002. And, from an earnings perspective, we are also maintaining our EPS objective of €1.22 to €1.25 per share before acquisition costs. These objectives for revenue and earnings continue to be based upon an assumed U.S. dollar to Euro exchange rate of $1.20 per €1.00 for the fourth quarter. We are modifying our revenue growth objective for 2003, reflecting lower service revenue in the second half of the year and our outlook for the fourth quarter. Our 2003 revenue growth objective in constant currencies is now 5% to 6%.
“Looking ahead to 2004, we are providing our preliminary views at this time. Our revenue growth objective is about 6% to 7% in constant currencies. Taking an assumed U.S. dollar to Euro exchange rate of $1.20 per €1.00, therefore, leads to a reported revenue growth objective of approximately 4 to 5%. At this point in time, our financial objectives assume a continuation of the current business environment into 2004.”
During the third quarter, the Company’s free float increased to 48% from 32% as a result of the French government’s sale of its entire holding in DS. The French government had been a shareholder since May 31, 2001 as a result of DS' de-merger from its former parent company, Dassault Aviation, in which the Government was an equity holder. Following this sale, the shareholder base of DS is composed as follows: free float of approximately 48.0%, Groupe Industriel Marcel Dassault with 45.2%, and Charles Edelstenne, Chairman of Dassault Systemes with 6.8%.
Charles Edelstenne, Chairman, commented, “We were pleased by the level of interest in our stock during the French government’s sale of its DS shares which was oversubscribed more than four times. It reflects the confidence of investors in the strong fundamentals of our business and our strategy.”
All financial information is unaudited and reported in accordance with U.S. generally accepted accounting principles (U.S. GAAP). Additional financial information, specifically noted as such, is also presented that is not in conformity with U.S. GAAP, with the presentation of operating income, operating margin and earnings per share before acquisition costs (acquisition costs are primarily comprised of technology amortization in addition to other acquisition- related costs) or variances in constant currencies. The Company has provided on its website www.3ds.com reconciliations between U.S. GAAP and non- U.S. GAAP figures. All comparative figures are given on a year over year basis unless specified otherwise.
NEW PRODUCT LAUNCHES
DS introduced Version 5 Release 12 -- Collaborative PLM for on demand businesses. V5R12 allows critical PLM components to be merged in collaborative workspaces allowing lifecycle management and product design activities to be conducted in parallel while ensuring synchronization of collaboration in the context of correct, up-to-date data. New capabilities in ENOVIA Portal 3d com, including enhanced CATIA-ENOVIA integration, allow 3D data, product structure, and other relevant product information to be shared in real-time through web portals.
The new V5R12 product portfolio brings business value to manufacturers in the following areas:
- Core Business - V5R12 enables companies to organize activities around their core business and focus on products. V5R12 redraws the boundaries between traditional product authoring and PDM-related activities, providing users with unified PLM workspaces in which they can process all facets of their activity.
- Content for Collaboration - V5R12 helps companies deliver the right content for collaboration throughout the product lifecycle. This improves exchanges between extended enterprise teams and helps businesses respond rapidly to market change.
- Requirements and Specifications - V5R12 allows companies to better link product design with requirement and specification management in order to dynamically adapt to market demand.
- Manufacturing Resources - V5R12 provides a unified workspace that connects product creation and manufacturing resources definition to help companies make cost-efficient production decisions.
During the third quarter, DS introduced a PLM industry solution for aerospace manufacturers based on proven DS PLM Practices. The Best of Breed Structure Engineering solution integrates the activities and processes required to design and manufacture structural aircraft parts and assemblies (sheetmetal, machined, and composite parts) as well as the corresponding tools required to build them.
CUSTOMERS AND PARTNERS HIGHLIGHTS
The First Aircraft Institute of AVIC-I (FAI), a leading Chinese aircraft research institute, has selected DS PLM solutions to develop China’s Advanced Regional Jet Program, ARJ21. CATIA V5 for collaborative product design and digital mock-up creation, and ENOVIAVPM for product data and process management, will enable the institute’s engineering teams to share data and work in a common 3D development environment across its multi-site operations.
Bosch, a major automotive supplier, has invested in DELMIA process planning solutions to meet the requirements outlined for DaimlerChrysler’s “Digital Factory” initiative. Bosch celebrated the introduction of its Cooperative Engineering program (COPE), with DELMIA Process Engineer at its core, as a “quantum leap in production planning”. The COPE program offers computer-aided production planning in parallel with product development. Benefits of simulated production planning include the identification and elimination of potential problems in a virtual environment, before they become real and incur damage and costs.
Convenience Food Systems (CFS) has standardized on SolidWorks software to design the industrial food processing and packaging machines it sells to global food companies. SolidWorks 3D mechanical design software accelerates large-assembly design for CFS’ machines, while COSMOS analysis software reduces production errors so CFS can speed products to customers. Based in the Netherlands, CFS is one of the world’s foremost convenience food packaging, preparation, processing, and marination machine makers.
Evernham Motorsports LLC, a leading NASCAR Winston Cup Series race team, has selected CATIA V5 for collaborative product development and SMARTEAM for collaborative lifecycle management to develop high-performance race cars through virtual testing rather than building costly, full-scale physical prototypes.
FE Mottram (Non Ferrous) Ltd., a leading alloy metal producer, has streamlined its smelting processes with DELMIA’s QUEST software. QUEST is a 3D simulation tool used to model and analyze facility layout and process flow. FE Mottram has already commissioned Phase II of the project where QUEST will be used to generate “what if” scenarios to reduce internal vehicle movement on site, with the principal goals being a 50 percent reduction in fuel consumption and further increases in worksite safety.
Yantai Raffles Shipyard, a premier offshore builder of ships and oil rigs, has acquired DS product development and data management software, comprised of CATIA V5 for collaborative virtual product development and ENOVIA LCA and ENOVIA Portal 3d com for real-time product data management.
Avatech Solutions, Inc., a leading provider of design automation and PLM solutions for the manufacturing, building design and engineering markets, and DS have signed a distribution agreement under which Avatech will significantly expand its marketing, sales and services in North America with integrated SMARTEAM PLM solutions.
Gehry Technologies, an independent company created by Gehry Partners’ research group, has formed a business partnership with DS and IBM. Gehry Technologies has received accreditation as a certified IBM Business Partner selling and servicing IBM and DS’ CATIA, ENOVIA and SMARTEAM Product Lifecycle Management software.
Fluent, a world leader in computational fluid dynamics (CFD) software has become a DS CAA V5 software partner. Fluent will develop, market and sell CFD solutions based on the DS CAA V5 architecture.
IGE+XAO, a leader in electrical schematic software development, signed a strategic development agreement under which IGE+XAO as a Gold Software Partner will develop, market and sell Dassault Systemes CAA V5 based applications for electrical modeling (functional, topology and logical) and electrical diagrams generation. Through this partnership, IGE+XAO will complement the existing DS’ V5 electrical PLM solutions.
Conference call information:
The Company will host a teleconference call today, Thursday, October 23, 2003 at 4:00 PM CET/3:00 PM London/10:00 AM New York. The conference call will be available via the Internet by accessing www.3ds.com. A replay of the conference call will be available until November 22, 2003 via the Internet by accessing www.3ds.com.
Statements above that are not historical facts but express expectations or objectives for the future, including but not limited to statements regarding the Company’s objectives for 2003 fourth quarter revenue, 2003 EPS on a reported basis, 2003 revenue growth in constant currencies, 2003 operating margin growth objective and 2004 financial objectives, including revenue growth objectives as reported and in constant currencies, are forward-looking statements (within the meaning of Section 27A of the Securities Act of 1933, as amended). Such forward-looking statements are based on management's current views and assumptions and involve known and unknown risks and uncertainties. Actual results or performances may differ materially from those in such statements due to, among other factors: (i) currency fluctuations, (ii) global economic conditions, (iii) market demand for our products and services, (iv) new product developments and technological changes, and (v), our ability to recruit and retain skilled personnel. Unfavorable changes in any of the above or other factors described in the Company’s SEC reports, including the Form 20F for the year ended December 31, 2002, which was filed with the SEC on May 15, 2003, could materially affect the Company's financial position or results of operations.