T130-2023 Notification regarding BIOVIA Compose and Capture 2022 SP1 HF6

CAPT-8102

Capture Hub reviewers are able to reorder parameters by groupIndex.

CAPT-8098

Improved the error message text shown when clicking the Balance button in the cell for the File/Adapter mapped parameters to collect value as: "Unable to collect equipment reading. Switch to Data Acquisition or Manual Entry mode to complete the collection."

CAPT-8054

Capture Hub does not allow manual entry without selecting equipment in Form View.

CAPT-8057

Updated data acquisition mapping process to use the actual equipment usages at the time of mapping to generate the list of data fields, instead of the planned equipment type/class. This reduces errors where multiple data packets can have data fields with the same name.

CAPT-8060

Reverted Data Acquisition tasks back to Reference Ontology (Vocabulary Entry) name and modified the Direct equipment collect functionality to handle DA tasks properly.

CAPT-8092

Applied the following rules to calculate RAW values when assigning calculated values to parameters, Capture Hub now round to 15 digits - when the result is larger than 15 digits (>= 1e+16) - when the result is less than 1, including leading zeros as digits. e.g. 0.0123 is 5 digits, not 3 digits - when the result is less than 1e-12, turns to ZERO value

CAPT-8096

If a network connectivity outage occurs after the Batch Registration button is clicked, but before the registration is complete, after reconnection to the network, on re-loading the Task, now the Container Barcode (which was created in CISPro) is shown. The step and task can be completed.

CAPT-8112

Publishing results sets internally used 'Force Modification' and 'Context Attribute' fields to false and null respectively *Changed To* - +Context Attribute: empty+ in the Results History indicates that either: - Legacy tasks (2023 and earlier) in which the Context Attribute field was used for equipment barcodes have been reopened, and results have been republished; Capture Hub has reset this field to null. - New tasks in which the Context Attribute field was populated by the Format Results protocol have been reopened, and results have been republished; Capture Hub has reset this field to null. The Format Results protocol should be re-run on updated tasks.

CAPT-8179

Filter by Date and Name now correctly filters measurement data in data acquisition.

CAPT-8093

The raw division of very large numbers that are results of other calculations is now more precise.