Marmion Academy
Discover how Marmion Academy’s high school research program gives students hands-on engineering experience with 3DEXPERIENCE simulation tools.
Customer Story
4a engineering GmbH
4a engineering GmbH is a technically oriented Research and Development company with a focus on plastics engineering and materials science. The core...
Contact Information
Company name: 4A ENGINEERING GMBH
Company address: INDUSTRIEPARK 1 8772 TRABOCH , AUT
Website: http://www.4a.co.at/
Partner Overview
4a engineering GmbH is a technically oriented Research and Development company with a focus on plastics engineering and materials science. The core competence of 4a engineering GmbH resides in concept finding and optimization of product ideas based on the profound understanding and interpreting of physical and mechanical processes. 4a engineering GmbH works with a wide range of partially specially developed simulation software and analyzing methods.
In physics we trust!
Partner Highlights
- Complementary Software
4a engineering GmbH offers a material modeling software solution including:
VALIMAT™ – from test to material card for Abaqus, VALIMAT™ is the software solution for managing material tests and for the generation of material cards. The software automatically generates FE-Models for the relevant tests. The parameters for the material card are optimized by an automatic reverse engineering process. VALIMAT™ supports the most common FE-solvers and material cards. The functionality was proven by hundreds of projects.
See more at https://www.4a-engineering.at/4a-valimat
As final result VALIMAT™ is able to deliver a validated material card for Abaqus.
- FIBERMAP™– mapping the fiber orientation from injection molding to structural analysis, see more at https://www.4a-engineering.at/4a-fibermap
- MICROMEC™- the virtual composite design, predicting thermoelastic composite properties, see more at https://www.4a-engineering.at/4a-micromec
- IMPETUS™ – efficient dynamic testing, sets new standards in the area of dynamic material characterization. The 4a-inhouse- developed testing system for the characterization of materials, especially plastics, is based on a pendulum working without additional actuation power.
The testing system can be operated on a common office desk located in the Research & Development department, key facts are:
applicable for plastics, composites, foams, aluminum, wood, …
impact velocities up to 4.4 mps (single pendulum) and 8 mps (double pendulum)
different test setups available: bending test, dynamic tensile test, puncture test, compression test (foams)
fast and flexible access to reliable material data
See more at https://www.4a-engineering.at
Programs
Complementary Software
REITHOFER,Peter384245106601reithofer@4a.co.at
Industry Expertise
Consumer Packaged Goods - Retail
High-Tech
Transportation & Mobility
Application Domain
Simulation/Materials
Simulation/Test Correlation
Simulation/Vehicle Occupant Safety
Explore Partners solutions
Explore Customer and Partner Stories
Airbus
Airbus has deployed Dassault Systèmes’ (3DS) applications to drive a global collaborative solution throughout the value chain from engineering to manufacturing..
Customer Story
University of Moncton
University of Moncton uses Virtual Twins for smart city planning in Moncton and Dieppe, balancing density, housing and biodiversity.
Customer Story
SENAI CIMATEC Facilitates the Journey from Engineering Education to Industry Professional
Brazilian education and research institution uses SOLIDWORKS to integrate mechanical design, industry projects, and workforce development.
Customer Story
KICKER Engineers High Quality Sound
Car audio manufacturer leverages SOLIDWORKS Design to accelerate audio speaker development, prototyping, and execution.
Customer Story
Nextern Advances Medical Devices from Concept to Clinical Use
A medical device development and manufacturing firm uses SOLIDWORKS Design to turn early concepts into manufacturable clinical-ready devices.
Customer Story
Romanian InSpace Engineering Compresses a Lab for Orbit
Outer space hardware developer used SOLIDWORKS Design to turn a microgravity fluid experiment into a compact payload for the International Space Station.
Customer Story
Laitram Machinery Advances Food-Processing Equipment Design
Food-processing equipment manufacturer uses SOLIDWORKS to develop smarter, more complex machines while continuing its long-standing legacy of innovation.
Customer Story
MRS Logística
Discover how MRS Logística uses DELMIA to transform rail freight transport in Brazil, optimizing crew planning and assets for a more sustainable rail network.
Customer Story
Terre adélice
See how Terre adélice uses the 3DEXPERIENCE platform and ITEROP to digitize business processes, saving 700+ hours annually and boosting operational efficiency.
Customer Story
More partners
ATA Engineering, Inc
ATA Engineering is a provider of analysis and test-driven design solutions focusing on the engineering needs of major manufacturers in addressing their cost, quality, and time-to-market engineering challenges. We use advanced computer-aided engineering software to solve problems for customers in the aerospace, themed entertainment, and consumer products industries.ATA is recognized as a leader in the development of innovative test and analysis methods for aerospace and defense structures. We are a pioneer in the application of flexible multi-body dynamics and fluid structure interaction (FSI) using Abaqus to solve the most challenging aerospace design issues.
PARTNER
ZENTECH INTERNATIONAL LTD
Zentech is an independent UK-based company providing software development and consultancy services to major international companies. Since 1980, Zentech has specialized in applying advanced engineering analytical techniques and developed various software systems. These include software for non-linear dynamic analysis of Riser systems and installation of pipelines for Oil & Gas industries. Software for simulation of 3D crack propagation and assessment of residual fatigue life and for performing forensic engineering studies to determine the cause of failure.Consultancy services are supported by proprietary and third-party analytical and design tools. Foremost among these is our 3D crack propagation tool, Zencrack, a state-of-the-art fracture mechanics based software for modeling and analyzing 3-dimensional cracks, predicting their behaviour and growth under linear, non-linear, thermo-mechanical fatigue and time –dependent loading, ZenRiser and Pipeline software.
PARTNER
INTEL
Intel Corporation is an American multinational corporation and technology company headquartered in Santa Clara, California, in Silicon Valley. It is the world's largest and highest-valued semiconductor chip manufacturer on the basis of revenue, and is the developer of the x86 series of microprocessors, the processors found in most personal computers (PCs). Incorporated in Delaware, Intel ranked No. 46 in the 2018 Fortune 500 list of the largest United States corporations by total revenue.Intel supplies microprocessors for computer system manufacturers such as Lenovo, HP, and Dell. Intel also manufactures motherboard chipsets, network interface controllers and integrated circuits, flash memory, graphics chips, embedded processors and other devices related to communications and computing.
PARTNER
Elemance LLC
Elemance strives to provide truly human-centered design solutions to enhance the protection and quality of life. Elemance provides virtual human body model based tools and expertise to enable truly human centered design. Incorporated in 2014, Elemance is the exclusive distributor of the GHBMC models, to both commercial and academic users. We license the complete family of human body models, encompassing both male and female, a range of postures, and varying levels of complexity. In addition to licensing, Elemance provides comprehensive maintenance, enhancement and support of licensed models, as well as consulting services related to biomechanics, injury biomechanics, and other human modeling applications.
PARTNER
AlphaSTAR Corp
Headquartered in Irvine, California – AlphaSTAR Corporation is an engineering software company that provides innovative physics-based simulation technologies. As a simulation solution provider, our tools are used to address real-life scenarios in the aerospace, automotive, defense, energy and discrete manufacturing industries, worldwide. Over 30+ years of developing cutting edge tools, has given us the ability to lend a hand to companies by improving product quality, reducing manufacturing cost and accelerating time to market. AlphaSTAR is the recipient of esteemed industry and technology awards for R&D and software development and is a proud women-owned business.
PARTNER
EikoSim
EikoSim aims at being the missing link between test and simulation in solid mechanics, by promoting a software suite that helps our customers put together all of their test and simulation data, to make educated simulation choices and shorten development times.
PARTNER
Endurica LLC
Endurica is the global leader in analysis and testing solutions for elastomer durability. We offer durability simulation software, testing services and testing instruments, as well as training, simulation services and consulting. Our solutions are used wherever an elastomeric part must meet a durability requirement. Endurica offers complete, production-ready workflows for mastering durability. Our solutions beat prior art “build-and-break” methods by reliably producing high-confidence results on tight schedules. With Endurica, you get durability right, and you get it done fast.
PARTNER
ARRK Engineering GmbH
ARRK Engineering specializes in all services related to engineering product development. We are an essential part of the international ARRK Group. Our customers are taking advantage of a one-stop product development process that we implement in collaboration with our affiliated ARRK companies: from engineering services to prototypes and low volume production - you get everything from one source. ARRK brings together highly qualified specialists in order to provide customers with top-notch technical know-how. The evolution of our software THESEUS-FE takes place in close cooperation with our automotive customers, thus guaranteeing a product that precisely serves their needs.
PARTNER
TNO MADYMO BV
TASS International was established from five independent automotive TNO subsidiaries. The supplementary business propositions of these five independent companies - TASS, TNO Homologations, TTAI, EEMC and AFB Driving Guidance Lab - result in a complete offering of safe, green and smart mobility solutions. To learn more, please visit TASS International.Our history goes back a decade and starts at TNO (Netherlands' Organization for Applied Research). TNO is the Netherlands' independent research organisation whose expertise and research make an important contribution to the competitiveness of companies and organisations, to the economy and to the quality of society as a whole.
PARTNER
KARAGOZIAN AND CASE INC
K&C’s services and products fall into the following functional areas of expertise: Conduct of vulnerability assessments for a variety of man-made and natural hazards. Develop and engineer cost-effective structural and mechanical designs to mitigate them. Develop and apply state-of-the-art analysis methodologies and custom or specialized software. Perform Research and Development (R&D) to advance knowledge or validate solutions.
PARTNER
