T39-2026 - Notification regarding BIOVIA Foundation, Compose, and Capture 2026 FH3

We are providing this Technical Note to inform you about the release of BIOVIA Foundation, Compose, and Capture 2026 FH3 which includes the following enhancements and fixed defects

Program

BIOVIA Foundation, Compose, and Capture

Operating System

All supported operating systems

Description

We are providing this Technical Note to inform you about the release of BIOVIA Foundation, Compose, and Capture 2026 FH3 which includes the following enhancements and fixed defects:

Enhancements

This release of BIOVIA Foundation, Compose, and Capture includes the following enhancements.

2026 HF3 Enhancements

There are no new Enhancements for this release.

2026 HF2 Enhancements

There are no new Enhancements for this release.

2026 HF1 Enhancements

Foundation, Compose, and Capture 2026 HF1 includes the following enhancements.

 

User StoryDescription
CAPT-10040When you execute a Data Acquisition Task and select equipment during a manual entry, the list of equipment now shows all the available equipment and is no longer limited to the Equipment Class or Equipment Type mapped to the parameter. This change does not affect other types of tasks, and it does not affect the equipment list outside of a manual entry.
CAPT-10083When you manually enter quantities for Data Acquisition tasks, you can now select all the units that are configured for the given parameter template.
DAT-31114PD Scientists can define key vessels and parameters before data collection, ensuring the unified result view highlights only the most relevant data.
SEC-11319Laboratory services can now be notified when measurements are created or updated for a specific piece of equipment to enable automated workflow updates.
DAT-31115You can now create Bioreactor Workflows to automatically monitor the equipment measurement results.

2026 Enhancements

Foundation 2026 includes the following enhancements.

 

User StoryDescription
CAPT-3196Global parameters are now available in procedure activities in addition to the previously supported step-level parameters.  
CAPT-6836Review now shows the proper information for Simple Batch task executions.
CAPT-7133Formulation batch tasks now support interleaved instructions with or without structured process parameters if they are configured in the Formulation Design application.
CAPT-9140The defined "Wet Percent" of each ingredient action will be displayed in the continuous grid and side panel.
CAPT-9585Added new "BC: Clean and Sanitize" PET requiring a signed user confirmation that the workspace was cleaned and sanitized before batch start.
CAPT-9612The system now flags any manual CSV file uploads during Capture execution. Attempting a manual upload will trigger an aRBE exception and automatically activate a “Manual Upload” filter in Review. This is a non-configurable core feature and applies to both Data Acquisition and Procedure activities. Users will see a specific message indicating that the action failed due to a manual upload.
CAPT-9680In Simple Batch and Procedure executions on 3Dx Platform, the container scan now validates the container first against the planned inventory material ID, and if there is no relationship it triggers a warning and a Material Exception signature.  If there is not material ID, validation proceeds against material name and synonym, as before.   Container validation in Science Cloud and on-premise is unchanged.  
CAPT-9853If the latest event for an instrument is a failed, unscheduled maintenance event, this causes a Metrology Exception and fails Auto-Review by Exception.
DAT-17928Updated History pages to display changes to Activity Parameters (planned values, lower/upper limits, etc.) and Task Parameters.
DAT-25543Study results in the analyze grid that are related to a task can be manually overridden.
DAT-27922Creating a batch from Formula Design, system now downloads the formula details asynchronously. 
DAT-28209Batch Release & Formulation Batch Plan studies have buttons to allow ad hoc Activities
DAT-29281System now supports use of Material ID when scanning container IDs. 
DAT-30152Workflow now displays the lifecycle state of the "make Activity" task. 
DAT-30164It is now possible to edit Workflow properties in the Background section when the workflow is In Progress state. 
DAT-30206Message Listener clients can now differentiate between the entity operation that initiated the callback, e.g. insert, update, lifecycle change, or delete.
DAT-30341Registered materials from Capture are now of type Formulated Materials
DAT-30600To stay current on the supported versions, the latest versions of Java 11 and Tomcat 9 have been updated.
DAT-30633Now possible to assign one or more Equipment Classes to an Activity.
DAT-30634Each instance of High-Value Equipment can be assigned to a specific Hub Group.
DAT-30698Developers now have an endpoint for disposing a Container
DAT-30715Simple Batch Activity now supports use of Classification Levels 
DAT-30835Workflow's Background section now displays the Collaborative Space.
DAT-30883Selected Material Lots and corresponding Specification or Sample Plan Versions expanded to display distinguishing details.
DAT-30925You can now add conditional values in the extended properties of a Study.
DAT-30959Stability Workflow now separates the sample pull date from the testing window date. 
DAT-30966Stability Workflow now populates existing OOTB Sample properties Planned Collection Date, Stability Time Point, Stability Temperature (C), Stability Humidity (%RH), and Stability Stress String.
DAT-30969Added a date range filter and a recursive location-based filter to the Worklist Widget (Samples to Pull Widget)
DAT-31211You can now add a signature policy to the to the Lifecycle Policy transition: Study > Completed > Reopen Study.
DAT-31266The Stability Workflow now support manually overriding the task's results.
DAT-31355Plate object added to support plate-based workflows.
DAT-31385To streamline the management and submission of plated samples to the testing lab, administrators can now control whether the Plate tab displays in a Task Plan and in which types of Task Plans. This solution integrates directly with a BIOVIA Services–developed Plate tool.
DAT-31388For efficient execution of high-throughput workflows, you can now assign an Activity to an entire plate of samples.
DAT-31879A Study Report Protocol has been added to the Database and Application Integration -> Application Integration -> Laboratory -> Operations folder in Pipeline Pilot.
PROP-10598Process Element Templates can now be edited and saved with their step-level signature settings for Data Entry and Data Verification.  
PROP-11900Material ID is now an available field in procedure activities.  This ID can be used for more precise container validation on the 3DEXPERIENCE Platform instead of just material name and synonym.   Material ID has no functional purpose for integration with CISPro at this time.  
PROP-11972BIOVIA Compendia process element templates are now included as an improvement to the previously provided standard library content for Compose, supporting use cases in pharmaceutical development.  
PROP-12553Global parameters are now available in procedure activities in addition to the previously supported step-level parameters.  
PROP-12554Global parameters are now available in procedure activities in addition to the previously supported step-level parameters.  
PROP-12555Global parameters are now available in procedure activities in addition to the previously supported step-level parameters.  
PROP-12830Process Element Templates are now managed with respect to collaborative spaces in a manner similar to how activities are.  
PROP-9797Global parameters are now available in procedure activities in addition to the previously supported step-level parameters.  
SEC-11003Metrology due dates can now be scheduled for the end of a week, month, or year. Existing metrology events continue to calculate the next due date based on the date the event was last successfully completed.
SEC-11318To improve the speed of measurement retrieval and enable retrieval of larger measurements, you can now retrieve a subset of the measurement’s readings. This story applies to measurements based on equipment class readings.
SEC-11407During data acquisition, the data preview page now has an increased viewing capacity of instrument measurements and performance. * For larger measurement, the data preview page now displays only the columns of data that are needed for the requested parameters in an execution. * The data preview page automatically opens only measurements that can be mapped to the current task. Measurements that are already mapped to tasks do not open. * You can now map samples for measurements up to 150,000 data points, and an error message displays if the measurement exceeds this limit. * You can download a comma-separated value (CSV) file of the full measurement if you need to review additional data.
SEC-11424Data acquisition tasks with instrument data that was automatically applied can now automatically complete and release. The task automatically completes if each sample has at least one result. Otherwise, it remains in progress. The auto-completed tasks then auto-release if the tasks' lifecycle is configured to allow auto-release, and all the review criteria is met.  
SEC-11433You can now retrieve a subset of the measurement’s readings, which improves the speed of measurement retrieval and enables the retrieval of larger measurements than was previously possible. This story applies to measurements based on data packets.
SEC-8453A signature can now be required when recording an unscheduled maintenance event or using the Edit button to record a scheduled maintenance event for equipment. This feature is configured by assigning signature policies to the Manual Metrology lifecycle action in the Equipment lifecycle.
SEC-8717Reference data can now be exported from the entity's Admin and Settings page. One or more reference data can be selected and exported. Administrators may still export all reference data from the Migrations page in Admin and Settings.
CAPT-10000The Process execution API has been updated for better use in the Pipeline Pilot scripts.
CAPT-10097The material addition Process Element Template now has Data Entry and Data Verification enabled, so all material addition steps in Simple Batch will requires those signatures as defined by the Lifecycle Policy.
CAPT-6507When a container is scanned its certification for use in the execution is validated. When the contents of a scanned container do not meet the requirements of the workflow, it triggers a warning and a material exception signature.
CAPT-6508It is now possible to scan or enter an unregistered container ID, random text, or 'N/A' for the material scan in Capture.  If the container ID is not validated in inventory, the user is warned and a material exception signature is presented.  
DAT-17332Additional Hub Notifications created for Retest, Review, Correction Needed, Revert, Task Split, Task Delete, Task Abandon, and Task Plan transitions.
DAT-22065In a Task Plan and the widget grids, you can now sort the Collaborative Space, Pending Status, and Lifecycle Policy columns.
DAT-22837Added the ability to configure Signature Policies with a defined signing order, enabling control over approval sequence—for example, requiring QA to sign last.
DAT-25671Added support for defining exclusive limits (< and >) when configuring Specifications, providing greater flexibility when evaluating them in Workflows. 
DAT-27846Hub configuration switch allows limited use of Request and Split to Task Plan. 
DAT-27982Now possible to configure a signature on Task Plan > Completed > Withdrawn transition
DAT-28181Enumerate action can be applied to all timepoints, or selectively. By delaying enumeration of later timepoints, you keep the flexibility to adjust the design as needed.
DAT-28867Given a Workflow with a Specification that includes a string parameter then the parameter displays in the Analyze grid. 
DAT-30036Batch Release workflow enhanced to support additional Candidates. 
DAT-30056Sample Plan option added to support those configurations where not all Activities have samples.
DAT-30151Add optional rules for how Lifecycle Policy is assigned when creating Samples and Tasks.
DAT-30635To stay on track, you can now schedule tasks directly onto specific equipment.
DAT-31151Added an option to physically track Stability inventory as Hub Samples, automatically creating one Hub Sample of EACHES unit per storage condition.
DAT-31152Enabled editing of the start date for samples and tasks within In Progress Stability Workflows, provided they have not yet been started.
DAT-31261You can now create a Stability Workflow directly from a Completed or Released Batch Release workflow, which automatically populates the T0 timepoint with the Batch Release results.
SEC-11303Data acquisition activities can now be configured to allow automatic data acquisition. When an activity is so configured, the system will automatically apply a new measurement to a data acquisition task as long as the measurement contains the task ID (ex: Tnnnn). The task must be in a writable state and not have any manual data entry or manual data acquisitions. This is supported when using class reading equipment commands. 
CAPT-8532Simple Batch tasks now properly support interleaved processing instructions without parameters from Formulation Designer.  
CAPT-8545The material addition steps in Simple Batch are now generated from a backing unit op PET "BC: Direct Weigh", and default to direct weigh for amount collection.
CAPT-9276The equipment grids no longer display the live equipment status. In the expanded equipment grid, you can now select the !-icon to view the status at the time of use. 
DAT-24554Added support for defining different Sample Types when Sequence Activities create samples, allowing more precise control over sample classification which the CDS Add-in requires.
DAT-29259Added notifications to alert users when a newer Specification version is available, allowing them to optionally upgrade their In Progress workflow.
DAT-29864Sample Plan enhanced to allow setting Document ID and Task Lifecycle Policy
DAT-29915Sequence Activity Tasks can now be batched and executed together. 
SEC-11302The equipment measurement viewer now has a stronger capacity to handle larger measurements. * You can now view data points of up to 150,000. * You can download comma-separated value (CSV) files of measurements larger than 150,000 data points. You can view these in Microsoft Excel or other CSV-viewing applications.
DAT-23627Added support for redesigning an approved Stability Study Workflow even after execution has begun. 
SEC-11174The integration gateway was updated to a newer release of Node.js.
DAT-29197The Grails Framework has been updated to version 5 to stay current.

Fixed Defects

This release of BIOVIA Foundation, Compose, and Capture includes the following fixed defects.

2026 HF3 Fixed Defects

Foundation, Compose, and Capture 2026 HF3 includes the following fixed defects.

 

DefectDescription
PROP-13192Detection of process element step number for a process parameter used in a summary expression is now checking all characters, not just the first character; truncation no longer occurs.
PROP-13210Fixed an issue where an expression editor showed an erroneous invalid error, which did not prevent recipe save. The erroneous error is no longer thrown.

2026 HF2 Fixed Defects

Foundation, Compose, and Capture 2026 HF2 includes the following fixed defects.

 

DefectDescription
DAT-33195Fixed a rare database migration issue when upgrading from 2024 SP1 HFx to 2026 HF1.
DAT-33224It is no longer necessary to include the "filter" section in the subscriber JSON necessary for triggering subscriber protocols after upgrading from 2024 SP1 HFx. 

2026 HF1 Fixed Defects

Foundation, Compose, and Capture 2026 HF1 includes the following fixed defects.

 

DefectDescription
DAT-32410You can now edit properties with more than 1000 values without a reported error.
CAPT-10297You can run a metrology task, and the execution picks up the latest activity and planned values as expected.
CAPT-10308When you fill down (Ctrl+D) values in the equipment-mapped parameters, the equipment associated with the values is now identified and propagated, and there is no longer an error.
CAPT-10317When you fill down (Ctrl+D) values in the equipment-mapped parameters, the equipment associated with the values is now identified and propagated.
CAPT-10342The "Release Selected" functionality in Review works in multi-byte locales.
CAPT-10359When you reversion a child activity in a collaborative space in which "Use Latest Activity" is set to IncludeParentVersion, the planned values now behave as expected.
CAPT-10380Reports generate successfully for executions that are in partially signed states.
CAPT-10383The execution and Review signature dialogs function correctly in multi-byte locales.
CAPT-10390The review filters and drop-downs display the correct information for values that are mapped to material containers. 
DAT-30761Hub Linux service now runs as an unprivileged user.
DAT-31284Ad Hoc Activities from Sample Plans are now validated for analysis and quality attribute so they can be used in a Worfklow.
DAT-31840When the units are not set in the Specification, the Workflow Parameters now use the units set in the Activity.
DAT-32220You can now configure the system to notify other users when a Task Plan moves to the In Progress state.
DAT-32543When filtering for materials, system will now inform the user when there are too many results to display instead of showing no results to display.
DAT-32597After you remove specifications, a misleading error message no longer displays when you retrieve the Workflow results.
DAT-32608Auto-upgrade of approved Sample Plans now works properly.
DAT-32650Batch Workflow now shows the correct list of Activities when setting the Make Activity.
DAT-32669The Hub Linux upgrade now works for RHEL 8.
DAT-32731Prevented a Database Connection leak if a deadlock exception occurred when polling the database for new background messages to process.
DAT-32791Hub Linux shutdown.sh now properly shuts down the Hub service.
DAT-32808Hub Linux service no longer installed as root.
DAT-32809When trying to install Hub on Linux when the Hub service is running, user will now be asked to stop the running service before proceeding.
DAT-32811Hub Linux upgrade when existing installation is a service now will now properly detect when previous installation owned by root and terminate with helpful message.
DAT-32817Hub Linux installer has removed an incorrect command line parameter and now uses the correct garbage collection algorithm.
DAT-32860The Hub Linux installer no longer allows for a blank keystore password.    
DAT-32871During an upgrade, the Hub Linux installer no longer erases the keystore password setting.
DAT-32936The Batch Workflow Set Make Activity dialog now shows the proper list of Activities.
PROP-12968In the Expression Editor, the summary select now recognizes parameters containing a hyphen in the display name.
SEC-11104During the equipment file loading, there is no longer a timing issue that might fail a parser job.
SEC-11648To improve the Empower Integration, the add-in better maps the Empower data fields to the results CSV file. The results now send to the measurement store up to 90% faster (not including reports). 
SEC-11728Improved the security of the migrations page in Admin and Settings.
SEC-11776The data preview page now correctly applies the group by flag to group samples within the measurement.
CAPT-10274If you change the step through the instructions card when a container scan is in progress, the scan now fails with an error message. You must rescan the container.
CAPT-10346When you clone a child activity with proxy materials and re-version the clone with new planned material names, the execution uses the updated names.
DAT-31441As expected, a lifecycle subscriber protocol is no longer executed twice in some configurations.
DAT-32670Hub Linux install_service.sh script no longer tries to stop the service if it is not running.
DAT-32671The Hub Linux install_service.sh script no longer tries to start the service.
DAT-32707The Hub Datasource pools are now properly exposed as JMXBeans, and you can observe them in Melody.
DAT-32738If the Sample Name Templates are ambiguous when you execute Sequence Activities, the Sample Names revert to using the Sample Ids.
DAT-32769On Linux, the Hub heap memory is now properly set on service startup.
DAT-32925The supported OS message in the Hub Linux installer now includes the correct versions of RHEL.
DAT-32926The Hub Linux installer no longer has an errant check for init.d.
DAT-32927Hub Linux installer now properly checks for netstat installation before continuing.
PROP-12550A process tree with many steps now renders correctly when you scroll.
PROP-12990As expected, the lock icon now shows when someone without the Author/Recipe opens a Recipe.
PROP-13015You can now use "type ahead" to manually add sample mappings, without the risk of creating an invalid URN value. You can now reopen, edit, and clone the existing recipes with invalid URN values in sample mappings without error. The resulting clone is fixed.
PROP-13042The Procedure Approval Reports were generated as .html instead of .pdf. As expected, they now generate as .pdf files.
DAT-32692When you click a Specification in a non-Batch Workflow, it now links to the Specification page.
PROP-12948The Activation Condition preview now clears when you switch to a different Activation Condition.

 

2026 Fixed Defects

Foundation, Compose, and Capture 2026 includes the following fixed defects.

 

DefectDescription
DAT-30768Fix a bug that didn't allow adding entries to the Sample Name Templates and Task Name Templates vocabularies.
DAT-31350Fixed an issue where samples created in the Task Plan were not appearing in the All Samples widget.
DAT-31594As expected, users with only the Foundation/View Activities permission cannot execute Activity lifecycle actions. For consistency with previous implementations, the lifecycle transitions now require the Foundation/Manage Activities permission. 
DAT-31608The Import Material action in Workflows now behaves consistently with the Materials tab in Task Plans. 
DAT-32023The sample relationships are maintained after you split an affiliate sample.
PROP-12422The re-authentication dialog now shows properly in Compose Hub's recipe view.
PROP-12636The Process Element Template editing view successfully opens when opening a process element template from the grid.
PROP-12858The system now handles cloning correctly, even when the _Step_ element includes a child _Action_ type process element.
PROP-12861As expected, the Split Task inherits the Sample Level Flag when you clone or reopen an Activity.
PROP-12899When Pipeline Pilot runs on Linux RHEL 9, Compose integrates with it as expected and you can create a directory from a zip file.
CAPT-10057In the Reports, the 'Updated By' section no longer shows updates that are associated with step view changes. This fix does not address historic data.
CAPT-10131The "Current User Excluded" signature policy now functions as expected on steps, which allows signatures from any users other than the current one.  
CAPT-10219In the Review page, the validity and status fields are read-only when users do not have the right to modify values.
CAPT-10305The performance of the container scanning has improved.
CAPT-9718Min, max, and threshold values are now compared against the "reportedValue" field, which is already formatted using the defined rules.
CAPT-9977When you cannot abandon a step due to the state of other steps, the item state drop-down includes "Abandon Step Unavailable". Clicking this text shows an information popover that lists the steps that must be completed before you can abandon this step.
CAPT-9979When a step cannot be abandoned due to the status of other steps, the item state drop-down will include "Abandon Step Unavailable." Clicking this text will display an information popover that lists the steps that must be completed first before this step can be abandoned.
CAPT-9990The Data Modification signature is not incorrectly triggered when you link non-sample results from a combined execution.
CAPT-9999When the recipe phrasing is parsed, the '$' characters are detected and encoded so that they do not fail the subsequent processing.
DAT-26236Fixed an issue where navigating between the Audit History and Event View caused pages to fail loading or display errors due to invalid expressions.
DAT-29244Updated History pages to display changes to Activity Parameters (planned values, lower/upper limits, etc.) and Task Parameters.
DAT-29618In the Edit Tasks Parameters window, the tasks from a cloned Activity Plan no longer display the limits from the original Activity.
DAT-29863Added a permission check to ensure users can access the requestor’s Task Plan; if not, an error message is displayed.
DAT-30254Fixed an issue where the Sample History page incorrectly allowed filtering by Task.
DAT-30335Fixed an issue that prevented users from navigating away while editing a Sample Plan.
DAT-30363Upgraded the Worklist (formerly Samples to Pull) widget to improve performance when viewing a specific Stability Workflow.
DAT-30433Fixed an issue where filter by a property that is a URN generated an error
DAT-30569The Collaborator Group widget column no longer appears to be filterable
DAT-30624Fixed an issue where the audit history hyperlink did not navigate correctly when a Task Plan name was with a special character.
DAT-30692Added a notification explaining that configuring an Activity’s Parameters with duplicate Display Names has limited support. 
DAT-30759Fixed an issue so that enumeration functions correctly, and tasks are now properly assigned to the requested group specified in the Sample Plan.
DAT-30760Fixed an issue where Ctrl-D did not copy the value into the selected rows.
DAT-30861Corrected an issue when sharing Task Plans across collaboration spaces.
DAT-30914Subscriptions are now created for Split Tasks. Previously Split Tasks would not cause Lifecycle Subscriber protocols to be called.
DAT-31095This issue was caused by AWS SQS service that can be configured to send gzipped file when downloading a stored file. IG was not handling the gzipped format.
DAT-31290Workflows now require a unique Analysis/Quality Attribute/Component on all Specification Method Characteristics within a given Specification Method.
DAT-31306Modified the query run by the Samples Widget for Task and Task Plan ID to be an exact match to improve performance
DAT-31341Fixed an issue where scanning a disposed container did not display an error message.
DAT-31383As expected, when you enable the Equipment Scheduling Calendar, tasks with multiple due dates display correctly in the Calendar view of the My Tasks widget. 
DAT-31424As expected, you can now split task with two Lifecycle Subscriber protocols. Previously, this Split Tasks action failed if multiple Lifecycle Subscriber protocols were registered.
DAT-31435Fixed an issue allowing tasks with two lifecycle subscriber protocols to be split successfully.
DAT-31507You can remove an assignee in the Retest Task dialog as expected, and the assignee and group information is recorded correctly in the History page.
DAT-31578When you generate Certificates of Analysis (CoA), batch workflows that were created before R2024x FD04 without a ‘Certify Material Until Date’ parameter no longer cause a null error.
DAT-31629As expected, you can now delete the date value for data-type Extended Properties.
DAT-31793Fixed an issue in the affiliate sample process where residual state from handling a single sample could incorrectly affect subsequent actions when selecting multiple samples.
DAT-31834Fixed a frontend issue where setting an Equipment Class/Type on an Activity could result in a null context, preventing values from loading in the Parameters grid dropdown for mapping equipment readings.
DAT-32385As expected, you can now add a Sample Plan to the Time Point Logistics row in a Stability workflow.
DAT-32446Fixed an issue where enumerated studies did not correctly display task results across multiple specifications when the component field was used as a comment.
DAT-32511Fixed an issue where enumerated studies did not correctly display task results across multiple specifications when the component field was used as a comment.
DAT-32512From the Ad Hoc Activity dialog, you can now add the correct Activity types to the Workflow.
DAT-32558Duplicate asynchronous Workflows do not launch, so that the simultaneous update of the same data from multiple jobs no longer causes optimistic lock exceptions.
PROP-12271User data, as creator, is now included upon the initial creation of a Process Element Template.
PROP-12362The Compose web page no longer freezes when the sample mapping is removed and re-added.
PROP-12375Compose recipes that include 'recipe' in their name can now be executed or exported without error.
PROP-12379The match() function works as it did in 2023 SP1 HF3 when used in expressions with a RegEx string.
PROP-12449The expected validation error is now thrown when a user attempts to save a recipe containing a parameter with both actual expression and equipment mapping.
PROP-12568Recipe clones now reflect updates to the linked activity on the original recipe.
PROP-12623Activity parameters now maintain their sample level status in activity clones.
PROP-12713The cloned Process Element Templates now migrate successfully.
PROP-12725UI issues are no longer observed when clicking outside the Local List dialog on a global parameter.
PROP-12733The system no longer displays a default value of "0" when a numeric parameter planned value is cleared and the parameters are collapsed. Now, the cleared state is accurately retained and displayed, ensuring data integrity and preventing misleading values.
PROP-12736Numeric Parameter no longer shows 0 for empty planned value when all editors are collapsed.
PROP-12745The add parameter dialog functions as expected when material with scan container is present on the step.
PROP-12754When a sample extended property contains more than 100 properties, all the properties now render as expected.
PROP-12760The Recipe Comparison report now shows updated instructions.
PROP-12767In the Process Element Template (PET) Library: * You can delete or upgrade a parameter either on the PET or from the PET, which enables the 'Save' button. * In the identification details, edit mode now functions properly under all circumstances. * Newly added parameters are now immediately visible when you edit them.
PROP-12775As expected, the activities and recipe clones include the parent recipe's extended properties. 
PROP-12822Hub does not run out of Heap Memory when you bootstrap ParameterTemplates/Unit Operations.
PROP-12835You can now save Process Element Templates that contain an appended parallel step.
PROP-12853The French language messages display correctly.
PROP-12928As expected, you can edit an imported, approved Master Recipe with a Draft activity.
PROP-12942The save button is now enabled when you double-click a Process Element Template to open it in edit mode.
PROP-12953As expected, the Sample Mappings now clear when you remove the sample from a cloned step.
PROP-12954As expected, you cannot add a child step Process Element to a 'Step' type Process Element Template.
SEC-10797Migrations no longer fail when there is a GUID mismatch in the Location Type hierarchy.
SEC-11116Improved WebSocket connection handling to reduce potential status reporting problems.
SEC-11180Increased the maximum vocabulary name length that can be handled during a migration.
SEC-11258Corrected a problem that caused French language messages to be displayed incorrectly.
SEC-11345When an equipment resource is in use and another process requests it, the error now produces a message.
SEC-11352The system retrieves and displays large measurements better. The measurements of 150,000 data points now display, and you can download larger measurements to view offline.
SEC-11353The example protocol "Hub Groups and Users Upload Example" is obsolete and has been removed.
SEC-11373You can now import the vocabulary entries in the task's results into Empower's sample sets.
SEC-11384You can now migrate equipment that is configured with a scheduling group.
SEC-11401When you edit a user account from the Related Groups section to remove a group relationship, and more than one relationship exists in the same group, the selected entry is correctly removed.
SEC-11604When a task is in a collaborative space that has been given access to more than 100 individual users (not groups), you can now import the sample data to Empower.
SEC-11635After you delete an existing WebSocket sessions through API, you no longer need to restart the Hub service to reestablish an integration gateway WebSocket connection.
CAPT-10082When a process element template in a Formula defines parameters with range, but no target planned values, they are properly shown in Capture Hub.
CAPT-10108As expected, the material exceptions display in Review only when a signature was applied and signed to properly notify when an exception was encountered.
CAPT-10125As expected in the continuous grid, the File and Date/Time values show the file name and the localized date.
CAPT-10127As expected in Review, the material exceptions show only when there was an applied signature that someone signed. This properly notifies reviewers that there was an exception.
CAPT-10173When the "Automatic Opening of Containers" setting was enabled, a scanned container failed. The system now correctly processes container scans, even when the setting is enabled.
CAPT-10181When the "Automatic Opening of Containers" setting was enabled, a scanned container failed. The system now correctly processes container scans, even when the setting is enabled.
CAPT-10187The initiated tasks correctly post the results to Task Plan, and you can use them in linked tasks as expected.
CAPT-10227The "Next" button is now disabled while a container scan request is in progress which prevents users from navigating away prematurely and ensures scans complete as intended.
CAPT-10252When a step PUT request fails, the error message has been improved to include potential explanation
CAPT-10253The error message now includes a potential explanation when a recipe json's "Planned Equipment" values have a null context, and the step fails to update. 
CAPT-9307The Procedure Modification signature dialog displays a "Proceed" button.
CAPT-9427When registering a batch with multiple matching materials, the 'Select Supplier' dropdown works as expected.
CAPT-9627Users are not able to add equipment to a deactivated step
CAPT-9637Added a debug endpoint to re-attempt item state calculation if they are not in expected state after collecting values. Logs and audits attempts for further debugging 
CAPT-9644Local List parameter can now be used in Expressions
CAPT-9652The Review and Report's performance is improved for executions that contain many parallel steps. There are no changes to the initial loading of draft tasks.
CAPT-9666Added read only check for parameter templates to disable lifecycle actions for simple batch parameters.
CAPT-9689Removed code that was duplicating expected signature blocks to overcome limitations of protocol. Now with protocol updates this code in not needed.
CAPT-9728In Capture, the freeForm option is now automatically set to true when the Local List dropdown is empty, allowing input without predefined list values and preventing the exception.
CAPT-9753Users are now able to copy and export from the Review Notes Grid.
CAPT-9810The data verification signature is now applied only once per repeat step, which ensures cleaner and more consistent signature behavior. Previously, the data verification signature unnecessarily repeated for each value within a repeat step.
CAPT-9888Users are now able to see the last row(s) of the review grid.
CAPT-9937Fixed issue where wrong step cell group was being referenced when determining instructions visibility.
DAT-29214Updated the Import Materials dialog to display a “No materials found” message when no results are returned, replacing the previous indefinite loading indicator.
DAT-29278Fixed an issue in the Import Materials dialog where an invalid CAS Number message persisted after closing and reopening the dialog.
DAT-29422As expected, the saved or selected Activity views remain after you close and reopen the application.
DAT-29449Removed an incorrect Portuguese translation; the English text will now display instead. The correct translation will be included in a future release with updated language files.
DAT-29707Fixed an issue so that History now correctly displays edits to Characteristic Groups on the Specification page.
DAT-29770The Ansible installation of Foundation Hub 2026 on Linux now works properly.
DAT-29886Removed the extended property columns from the Import Materials dialog.
DAT-30179Updated behavior so that changing an entity’s lifecycle state now correctly updates its lastUpdated property.
DAT-30245Updated the system to allow material names of up to 500 characters.
DAT-30321Fixed an issue with language translations where messages containing single quotes did not display correctly and parameter substitution was broken.
DAT-30327Fixed an issue with language translations where messages containing single quotes did not display correctly and parameter substitution was broken.
DAT-30436Fixed an issue that occurred when the component field on a Specification was used as a comment.
DAT-30514Fixed an issue where Sample Plan contents were not displayed correctly after the Sample Plan changed collaborative spaces.
DAT-30515Fixed an issue where editing metadata (e.g., External ID) in a Workflow, Sample Plan, Specification, or Task Plan across collaborative spaces incorrectly displayed the error.
DAT-30516Fixed a tooltip in the PLP Protocol setup so it now correctly explains the values allowed in the Applicable Entities field when Usage Type is set to “Lifecycle Action Report”.
DAT-30586Updated the My Workflow widget to correctly support External ID searches.
DAT-30592In the Import Materials window, the selected containers and their materials have imported and display as expected. When you select the container, it automatically selects its parent material, and the material clears all associated container selections when you deselect the container.
DAT-30612Fixed an issue in Workflow when Sample Plans with no activities are used. 
DAT-30696Implemented a soft cap of 45 Sample Plan Activities to balance usability with system limits. 
DAT-30735Fixed an issue that was filling the log files with error messages during the push notification process.
DAT-30765Corrected the folder where Melody would log its data
DAT-30772Expanded the grid size so grid’s context menu could display in the Materials tab in Task Plan. 
DAT-30827Added validation to ensure the Workflow description does not exceed the maximum character limit.
DAT-30839Fixed problem where Approved Child Activities could not be reopened for edit in the new Activities widget.
DAT-30873Fixed a liquibase migration issue that could occur in rare cases during upgrade.
DAT-30958Fixed an issue so that renaming a Workflow now also updates the name of the associated Task Plan.
DAT-31012Corrected an issue where using $top=0 with RunsetResults triggers caused system errors.
DAT-31022Fixed a display issue in the Add Sample Plan dialog within Workflows, ensuring all available features are now visible.
DAT-31072Fixed an issue with language translations where messages containing single quotes did not display correctly and parameter substitution was broken.
DAT-31123Fixed an issue on the Extended Properties page, allowing the order of properties to be changed.
DAT-31125Fixed an issue where lifecycle subscriber functionality stopped working when two subscriber protocols were set.
DAT-31184Fixed an issue where manually entered dates in the Date Collected field could display in the incorrect format.
DAT-31237Stopped MessageListeners from deleted applications being triggered where a second application registered a similarly configured message listener
DAT-31298Fixed an issue in the Equipment Calendar view, allowing users to select Tasks directly from the calendar.
DAT-31331When there is enough grid content for a vertical scroll, updated styling to push the horizontal scroll bar below the last item instead of overlapping it.
DAT-31340Fixed an issue where special characters in Task Document IDs were not displayed correctly in the Sample Plan widget.
DAT-31401The PasswordEncryptor now runs on Linux as expected.
DAT-31445Fixed an issue when the user could receive an exception while adding parameters to activities when the equipment scheduling calendar was configured.
DAT-31453Now there is validation to prevent the creation of a Retest task that uses an Abandoned sample.
DAT-31851As expected, the Set Make Activity dialog displays the correct Activity type.
DAT-31889The Sample Receive Data behavior works as expected in the case of a mistakenly disposed sample that is accidentally received.
DAT-31904The Amount and Expected Concentration columns contain combined values, so the filtering has been disabled in the order grids.
DAT-31928In a Workflow, the Character Group filter does not incorrectly include or exclude characteristics.
DAT-32174The time to load the Hub landing page has improved.
DAT-32350As expected, the Task Plan tab widget includes the Task ID column when you export or copy the values.
PROP-11802When cloning a child activity, the Method ID is not increased, as expected.
PROP-12096Browser localization is now being applied to the Recipe Report.
PROP-12345The summary functions now validate properly when the first parameter is not available because of an activation condition.
PROP-12346Image previews in the process phrasing are now functional in migrated activities
PROP-12365If the Activation Condition checkbox is checked on the Start parallel step, it is no longer passed onto steps within the parallel block.
PROP-12394When Equipment Reading Parameter display names are duplicated, they are now iterated, allowing the recipe to be saved. 
PROP-12409Additional updates to recipe sample names are now being updated in the samples in the recipe's associated activity.
PROP-12417A helpful error is now thrown when an attempt is made to import a recipe that contains process parameters with invalid tags.
PROP-12421Fixed an expression issue that was preventing Capture from evaluating the expression. Expressions now correctly evaluate in Capture.
PROP-12429Fixed an issue with double-mapping dialogs, which no longer occurs. Materials can be successfully mapped to existing parameters and, if no parameters are available, users can add a new one and proceed with the mapping.
PROP-12432Under some conditions, the unit type previously prevented you from remapping to a different parameter. Now, as expected with the unit type set, you can remap the mapped parameter template to another compatible unit type.
PROP-12453The Process Element Summary no longer shows an error for a material mapping when the Disposition is 'Material Charge'.
PROP-12501The Compose Recipe Approval Report 2023 now reports all steps correctly when steps are included parallel blocks with predecessors.
PROP-12506A Compose recipe's Last Updated date-time localization is now correct for German and French.
PROP-12509The Compose recipe's Author field is now populated when "Link Existing" is used for process files.
PROP-12616Removing the sample from a process step now removes the mappings from the parameters. as well.
PROP-12619Fixed an issue in which badly formed vocabulary value constraints caused an issue with loading the vocabulary cache.
PROP-12622Fixed an issue in which Activity migration would fail if the associated Compose recipe contained an Extended Property mapped to an Equipment Parameter.
PROP-12645Fixed an issue where planned value settings were disabled when a planned value expression was added to the Numeric and Integer type parameters. Planned value settings can now updated after adding the expressions.
PROP-12654In French, the Help Text shown in the Recipe Equipment grid is now correct.
PROP-12659Previously, comments were incorrectly stripped from phrases when there was a mix of parameters with display names that contained comment characters, full-line comments, and end-of-line comments. Now, the comments remain, and the expression parsing behaves as expected in all cases.
PROP-12680The expression editor Round() function now accepts a parameter value for the nDecimals argument.
PROP-12718Values removed from the local list parameter are now fully removed, they are no longer displayed as usable planned values in the drop down.
PROP-12742The maximum character length of the Compose Material name field has increased from 245 characters to 500 characters.
PROP-12763The expression editor now shows the parameters from all previous steps in the recipe's process.
PROP-12796In the Equipment IOQ report, the Equipment Type's extended properties display correctly now that the number properties are strings.
PROP-12951The timeout for 'Biovia Recipe Approval Report 2023' generation has been increased.
SEC-10719On the Equipment Type page, the error scenario of creating two equipment instances with the same barcode value in one transaction is now handled correctly. 
SEC-10753Improved the user experience when typing to select a value from a drop-down list in Admin and Settings. Better error messages are provided when an invalid value is entered or when a value is typed but not selected from the list.
SEC-10754Deletion of equipment classes with active equipment types is now prevented. Deletion of equipment types with active equipment instances is now prevented.
SEC-10757History events are now displayed when the filter is set to show only deletions.
SEC-10782The Data Center location time zone is now editable to enable its use for metrology events.
SEC-10794Migrations no longer fail when there is a GUID mismatch in the Organization Type hierarchy.
SEC-10949When there are more than 5,000 items during a migration, the import button is no longer disabled.
SEC-11111It is now possible to remove an equipment command from the equipment's gateway configuration details page when it is no longer needed.
SEC-11151It is no longer possible to configure an equipment instance's gateway location when its connection type is set to "Not connected". This prevents saving the equipment in a configuration that will not work.
SEC-11158Improved the security of the information stored in the Empower add-in installation log file.
SEC-11164When printing labels, an error message is now displayed if the user does not have a preferred location but the system is configured to show equipment only at the user's location.
SEC-11293Duplicate vocabulary lists are no longer displayed when editing a parameter template.
SEC-11341As expected, the parameter context tags are not lost when you migrate a recipe.
SEC-11430When you migrate a recipe whose sequence template does not exist in the destination system, the improved error message now reads, "Sequence Template [template name] is missing. Create the missing sequence template and then try again."
SEC-11602For better usability, the following changes were made to the Equipment Work Items grid: * The "Last Date" column was renamed to "Last Processed." * The "Last Updated" column was moved. * You can now sort the data in the "Last Updated" column from newest to oldest. * The "Work Item Last Updated" column is now hidden.
SEC-8187Improved the error message provided when attempting to migrate a location to a destination system that has an incompatible location hierarchy.
DAT-30009Fixed an issue that prevented editing Task Properties for tasks created by a Stability Workflow.
DAT-31420Fixed an issue in the Workflow design grid where updates made via the API were not always displayed.
PROP-12252In the comparison and IOQ reports, the BIOVIA logo is shown with the correct color.
PROP-12387The Process Element Summary icon for an activation condition expression now persists after a refresh, even when the step contains no parameters. 
PROP-12393When multiple property parameters are added to a step, the Expand All and Collapse All parameters are shown immediately and no longer require a changing of parameter view for them to render.
PROP-12426Fixed an issue where, in some conditions, the Process Tree Flag for Activation Condition Expressions required a refresh to display; a refresh is no longer required.

Resolution                                                                     

BIOVIA Foundation, Compose, and Capture 2026 FH3 was released in February 2026 and is available for download at https://software.3ds.com under BIOVIA products:

Product line: Lab, Scientific and Content Solutions

Release: BIOVIA 2026

Level: BIOVIA 2026 Golden HF2

Fixes for this level: BIOVIA 2026 Golden

How to contact BIOVIA Support

If you have any questions, please contact BIOVIA Support.

Need Assistance?

Our support team is here to help you make the most of our software. Whether you have a question, encounter an issue, or need guidance, we've got your back.