Co-simulation using the SIMULIA Co-simulation Engine
- Fluid-Structure Interactions
- Electromagnetic-Structure Interactions
- Structure-Structure Interactions content
- System-Structure Interactions
- Vehicle Occupant Safety
Fluid-Structure Co-simulation
Co-simulation with Abaqus and Simcenter STAR-CCM+ from Siemens is jointly qualified and supported by SIMULIA and Siemens on Windows and Linux platforms. For any questions regarding co-simulation with Abaqus and Simcenter STAR-CCM+ you can contact either the SIMULIA local office or Siemens office.
| Simcenter STAR-CCM+ release | Qualified Abaqus Release | |||||
2016 | 2017 | 2018 | 2019 | 2020 | 2021 | |
2020.3 |
|
|
| |||
2021.1 |
|
|
| |||
2021.2 |
|
|
| |||
2021.3 | 2 | 2 | 2 | |||
1 Releases have been qualified by Siemens only.
2 Anticipated in Fall 2021 release.
| STAR-CCM+ version | Qualified Abaqus version - part 1 | |||||
6.10 | 6.10EF | 6.11 | 6.12 | 6.13 | 6.14 | |
5.06 |
| |||||
6.02 |
| |||||
6.04 |
| |||||
6.06 |
| |||||
7.02 |
| |||||
7.04 |
|
| ||||
7.06 |
|
| ||||
8.02 |
|
| ||||
8.04 |
|
|
| |||
8.06 |
|
|
| |||
9.02 |
|
| ||||
9.04 |
|
| ||||
9.06 |
|
| ||||
10.02 |
| |||||
10.04 |
| |||||
10.06 |
| |||||
11.02 |
| |||||
12.04 | ||||||
12.06 | ||||||
13.06 | ||||||
| STAR-CCM+ version | Qualified Abaqus version - part 2 | |||
| 2016x | 2017x | 2018x | 2019x | |
| 5.06 | ||||
| 6.02 | ||||
| 6.04 | ||||
| 6.06 | ||||
| 7.02 | ||||
| 7.04 | ||||
| 7.06 | ||||
| 8.02 | ||||
| 8.04 | ||||
| 8.06 | ||||
| 9.02 | ||||
| 9.04 | ||||
| 9.06 | ||||
| 10.02 | ||||
| 10.04 | ||||
| 10.06 | ||||
| 11.02 |  | |||
| 12.04 | | | ||
| 12.06 | | |||
| 13.06 | | | | |
1 Abaqus 6.10-2 is qualified with STAR-CCM+ 5.06.
2 Iterative coupling is supported beginning with the Abaqus 6.12 and STAR-CCM+ 7.04 releases.
3 Supports overset mesh technology.
Abaqus Supported platforms for Co-simulation with STAR-CCM+
Co-Simulation with Abaqus and STAR-CCM+ has been qualified with the structural and fluid analyses running on the same platform.
| Platforms | Abaqus Release - part 1 | |||||
6.10 | 6.10EF | 6.11 | 6.12 | 6.13 | 6.14 | |
Windows/x86-32 |
|
|
|
| ||
Windows/x86-64 |
|
|
|
|
|
|
Linux/x86-64 |
|
|
|
|
|
|
| Platforms | Abaqus Release - part 2 | |||
| 2016x | 2017x | 2018x | 2019x | |
| Windows/x86-32 | ||||
| Windows/x86-64 | | | | |
| Linux/x86-64 | | | | |
4 StarCCM+ 7.04 or prior is supported on Windows/x86-32 platforms.
Co-simulation with Abaqus and SC-Tetra from Software Cradle is supported and qualified by Software Cradle. The data provided on this page is based on information SIMULIA receives from Software Cradle. Please contact Software Cradle for further information and support.
| SC-Tetra version | Qualified Abaqus version - part 1 | |||||
6.10 | 6.10EF | 6.11 | 6.12 | 6.13 | 6.14 | |
V9 |
| Not supported | ||||
V10 |
| |||||
V11 |
|
| ||||
V12 RC1 |
|
| ||||
V12 RC2 |
|
| ||||
V12 |
|
| ||||
V13 RC1 |
|
| ||||
V13 RC2 |
|
| ||||
V13 |
| |||||
V14 |
| |||||
| SC-Tetra version | Qualified Abaqus version - part 2 | |||
| 2016x | 2017x | 2018x | 2019x | |
| V9 | ||||
| V10 | ||||
| V11 | ||||
| V12 RC1 | ||||
| V12 RC2 | ||||
| V12 | ||||
| V13 RC1 | ||||
| V13 RC2 | | |||
| V13 | | |||
| V14 | | Discontinued1 | ||
1SC/Tetra V14 is the final release of SC/Tetra series and will be paired with Abaqus 2018x. scFLOW will replace SC/Tetra series. At this stage no plans are anticipated to support co-simulation with Abaqus with the scFLOW. Please contact Cradle Software for further information.
Abaqus supported platforms for Co-simulation with SC-Tetra
| Platforms | Abaqus Release - Part 1 | |||||
6.10 | 6.10EF | 6.11 | 6.12 | 6.13 | 6.14 | |
Windows/x86-32 |
|
|
| |||
Windows/x86-64 |
|
|
|
|
| |
Linux/x86-64 |
|
|
|
|
| |
| Platforms | Abaqus Release - part 2 | |||
| 2016x | 2017x | 2018x | 2019x | |
| Windows/x86-32 | ||||
| Windows/x86-64 | | | | |
| Linux/x86-64 | | | | |
Co-simulation with Abaqus and FlowVision from CAPVIDIA is supported and qualified by CAPVIDIA. The data provided on this page is based on information SIMULIA receives from CAPVIDIA. Please contact CAPVIDIA for further information or support.
| FlowVision version | Qualified Abaqus version - part 1 | |||||
|---|---|---|---|---|---|---|
6.10 | 6.10EF | 6.11 | 6.12 | 6.13 | 6.14 | |
3.07 |
|
|
| |||
3.08 |
|
|
|
|
|
|
3.09 |
|
|
|
|
|
|
3.10 | ||||||
3.10.021 | ||||||
| FlowVision version | Qualified Abaqus version - Part 2 | |||
|---|---|---|---|---|
| 2016x | 2017x | 2018x | 2019x | |
| 3.07 | ||||
| 3.08 | ||||
| 3.09 | | |||
| 3.10 | | |||
| 3.10.021 | | | ||
1 FlowVision 3.10.02 and later use the Co-Simulation Services. Prior releases used the Direct Co-Simulation Interface which was deprecated with Abaqus 2017.
Abaqus supported platforms for Co-simulation with FlowVision:
| Platforms | Abaqus Release - part 1 | |||||
|---|---|---|---|---|---|---|
6.10 | 6.10EF | 6.11 | 6.12 | 6.13 | 6.14 | |
Windows/x86-32 |
|
|
|
|
|
|
Windows/x86-64 |
|
|
|
|
|
|
Linux/x86-64 |
|
|
|
|
|
|
Linux/x86-32 |
|
|
| |||
| Platforms | Abaqus Release - part 2 | |||
|---|---|---|---|---|
| 2016x | 2017x | 2018x | 2019x | |
| Windows/x86-32 | ||||
| Windows/x86-64 | | | | |
| Linux/x86-64 | | | | |
| Linux/x86-32 | ||||
Co-simulation with Abaqus and FIRE from AVL is supported and qualified by AVL. The data provided on this page is based on information SIMULIA receives from AVL. Please contact AVL for further information or support. The coupling has been discontinued with Abaqus 2018x since it uses the deprecated Direct Co-Simulation Interface.
| FIRE version | Qualified Abaqus version | ||||||||
6.10 | 6.10EF | 6.11 | 6.12 | 6.13 | 6.14 | 2016x | 2017x | 2018x | |
V2010.1 |
|
| |||||||
V2011 |
|
| |||||||
V2013.1 |
|
| |||||||
V2013.2 |
|
|
| ||||||
V2014 |
|
| |||||||
V2014.1 |
|
| |||||||
V2017 |
|
|
| ||||||
M V2017 |
|
|
|
| Discontinued2 | ||||
1Should be working, but has not been officially qualified.
2Abaqus-to-Fire co-simulation operated under the older Direct Co-Simulation Interface which has been deprecated.
Abaqus supported platforms for Co-simulation with FIRE:
| Platforms | Abaqus Release | ||||||||
6.10 | 6.10EF | 6.11 | 6.12 | 6.13 | 6.14 | 2016x | 2017x | 2018x | |
Linux/x86-64 |
|
|
|
|
|
| |||
Window/x86-64 | |||||||||
Co-simulation with Abaqus and AcuSolve from Altair is supported and qualified by Altair. Co-simulation with AcuSolve has been qualified with the structural and fluid analyses running on the same platform. The data provided on this page is based on information SIMULIA receives from Altair. Please contact Altair for further information or support.
| AcuSolve version | Qualified Abaqus version | ||||||
6.10 | 6.10EF | 6.11 | 6.12 | 6.13 | 6.14 | 2016x | |
1.7f |
|
|
| ||||
1.8b |
| ||||||
12 |
|
| |||||
13 |
|
|
| ||||
| Discontinued1 | |||||||
1 Abaqus-to-AcuSolve co-simulation operated under the older Direct Co-Simulation Interface which has been deprecated.
Abaqus supported platforms for Co-simulation with AcuSolve:
| Platforms | Abaqus Release | ||||||
6.10 | 6.10EF | 6.11 | 6.12 | 6.13 | 6.14 | 2016x | |
Windows/x86-32 |
|
|
| ||||
Windows/x86-64 |
|
|
|
|
|
| |
Linux/x86-64 |
|
|
|
|
|
| |
Linux/x86-32 |
|
|
| ||||
It is expected that the co-simulation can be performed with the CFD analysis running on platforms not supported by Abaqus. For a full list of platforms supported by AcuSolve, please contact Altair.
| XFlow version | Qualified Abaqus version | |||
2018x(1) | 2019x | 2020x(2) | 2021x | |
2017x FP1810(build 102.06) |
|
| ||
2018(build 104) |
|
| ||
2019x(build 106) |
|
| ||
2020(build 108) |
|
| ||
2020x(build 110) |
|
| ||
2021(build 112) |
| |||
2021 RF(build 112.05) |
| |||
2021x(build 114) |
| |||
(1)Paired with Abaqus 2018 HF1 release.
(2)Paired with Abaqus 2020 HF2 release.
(3)Requires extraction of CSS API.
Electromagnetic-Structure Co-simulation
Co-simulation with Abaqus and JMAG-Designer from JSOL Corporation is supported and qualified by JSOL Corporation. The data provided on this page is based on information SIMULIA receives from JSOL Corporation. Please contact JSOL Corporation for further information or support.
| JMAG-Designer version | Qualified Abaqus version - part 1 | |||||
6.10 | 6.10EF | 6.11 | 6.12 | 6.13 | 6.14 | |
12.0 |
| |||||
12.1 |
|
| ||||
13.0 |
|
| ||||
13.1 |
|
| ||||
14.0 |
|
| ||||
| 14.0 |
|
| ||||
16.0 |
|
| ||||
| 16.1 |
|
| ||||
| 17.0 | ||||||
| 18.0 | ||||||
| 18.1 | ||||||
| 19.0 | ||||||
| 19.1 | ||||||
| JMAG-Designer version | Qualified Abaqus version - part 2 | |||
| 2017x | 2018x | 2019x | 2020x | |
| 12.0 | ||||
| 12.1 | ||||
| 13.0 | ||||
| 13.1 | ||||
| 14.0 | ||||
| 14.0 | ||||
| 16.0 | | |||
| 16.1 | | |||
| 17.0 | | |||
| 18.0 | | | | |
| 18.1 | | | | |
| 19.0 | | | | |
| 19.1 | | | | |
1JMag v19.1 release is anticipated for June 2020
Abaqus supported platforms for co-simulation with JMAG Designer:
| Platforms | Abaqus Release - part 1 | |||||
6.10 | 6.10EF | 6.11 | 6.12 | 6.13 | 6.14 | |
Window/x86-64 |
|
|
| |||
Linux/x86-64 | ||||||
| Platforms | Abaqus Release -part 2 | ||||
| 2016x | 2017x | 2018x | 2019x | 2020x | |
| Window/x86-64 | | | | | |
| Linux/x86-64 | 2 | | | | |
2Linux/x86-64 platform supported with Jmag-Designer 17.0 and later
Structure-Structure Co-simulation
Co-simulation with Abaqus and FTire from Cosim Scientific Software is supported and qualified by SIMULIA.
| FTire version | Qualified Abaqus version - part 1 | |||||
6.10 | 6.10EF | 6.11 | 6.12 | 6.13 | 6.14 | |
2015-2 |
| |||||
2015-3 |
| |||||
2015-4 |
| |||||
2016-1 |
| |||||
2016-4 |
| |||||
2017-1 |
| |||||
2018-1 | ||||||
2019-1 | ||||||
2020-2 | ||||||
2020-4 | ||||||
2021-2 | ||||||
2022-4 | ||||||
| FTire version | Qualified Abaqus version - part 2 | |||||||
| 2016x | 2017x | 2018x | 2019x | 2020x | 2021x | 2022x | 2023x | |
| 2015-2 | ||||||||
| 2015-3 | ||||||||
| 2015-4 | ||||||||
| 2016-1 | | |||||||
| 2016-4 | | | ||||||
| 2017-1 | | |||||||
| 2018-1 | | |||||||
| 2019-1 | | |||||||
| 2020-2 | | | ||||||
| 2020-4 | | |||||||
| 2021-2 | | | ||||||
| 2022-4 | | | ||||||
Abaqus Supported platforms for Co-simulation with FTire
Co-Simulation with Abaqus and FTire is available on the following platforms.
| Platforms | Abaqus Release | |||||
6.10 | 6.10EF | 6.11 | 6.12 | 6.13 | 6.14 | |
Window/x86-64 |
| |||||
Linux/x86-64 |
| |||||
| Platforms | Abaqus Release | |||||||
| 2016x | 2017x | 2018x | 2019x | 2020x | 2021x | 2022x | 2023x | |
| Window/x86-64 | | | | | | | | |
| Linux/x86-64 | | | | | | | | |
Co-simulation with Abaqus and Simpack is supported and qualified by Dassault Systèmes.
| Simpack version | Qualified Abaqus version | |||||||||
6.13 | 6.14 | 2016x | 2017x1 | 2018x2 | 2019x | 2020x | 2021x | |||
9.10 |
|
|
|
|
| |||||
20171 |
|
|
|
|
| |||||
2018 |
|
|
|
|
| |||||
2018x2 |
|
|
|
|
| |||||
2019 |
|
|
|
|
| |||||
2019x |
|
|
|
|
| |||||
2020 |
|
|
|
|
| |||||
2020x |
|
| ||||||||
2021 |
|
| ||||||||
2021x |
|
| ||||||||
1 Support for co-simulation with Abaqus/Standard from Abaqus Version 2017x FP.1713 and Simpack Version 2017.1
2 Lifted MBS model setup limitations for co-simulation with Abaqus/Explicit from Abaqus Version 2018x FP.1814 and Simpack Version 2018x
Abaqus Supported platforms for Co-simulation with Simpack
Co-Simulation with Abaqus and Simpack is available on the following platforms.
| Platforms | Abaqus Release | |||||||||
6.10 | 6.10EF | 6.11 | 6.12 | 6.13 | 6.14 | 2016x | 2017x | 2018x | 2019x | |
Window/x86-64 |
|
|
|
|
| |||||
Linux/x86-64 |
|
|
|
|
| |||||
System-Structure Co-simulation
Co-simulation with Abaqus and Dymola from Dassault Systèmes, CATIA is supported and qualified by Dassault Systèmes, SIMULIA. Please contact your local SIMULIA office for further information or support.
| Dymola | Qualified Abaqus version - part 1 | |||||
6.10 | 6.10EF | 6.11 | 6.12 | 6.13 | 6.14 | |
Version 7.2 |
|
|
|
|
|
|
| 2016 | ||||||
| 2017 FD01 | ||||||
| 2018x | ||||||
| 2019x | ||||||
| Dymola | Qualified Abaqus version - part 2 | |||
| 2016x | 2017x | 2018x | 2019x | |
| Version 7.2 | ||||
| 2016 | 2 | |||
| 2017 FD01 | | |||
| 2018x | | | ||
| 2019x | 3 | |||
1Abaqus 6.14 and prior release use the model export (DLL) option.
2Abaqus2016 and later use the FMI 2.0 standard. The model export (DLL) option will be deprecated with Abaqus 2018 release.
3Abaqus 2019 and later use the FMI 2.0 standard for communicate with Dymola. The model export (DLL) is not supported anymore.
Abaqus supported platforms for co-simulation with Dymola:
| Platforms | Abaqus Release - part 1 | |||||
6.10 | 6.10EF | 6.11 | 6.12 | 6.13 | 6.14 | |
Window/x86-64 |
|
|
|
|
|
|
Linux/x86-64 | Not Supported | Not Supported | ||||
| Platforms | Abaqus Release - part 2 | |||
| 2016x | 2017x | 2018x | 2019x | |
| Window/x86-64 | | | | |
| Linux/x86-64 | | | ||
Vehicle Occupant Safety Simulation
Co-simulation with Abaqus and Madymo from TASS International, a Siemens Business, is supported and qualified by SIMULIA and TASS International. Support for co-simulation with Abaqus and Madymo was discontinued with the Abaqus 6.12 – 6.14, and 2016x releases. Abaqus 2017x re-introduce the coupling with the Co-Simulation Services.
| Madymo version | Qualified Abaqus version - part 1 | |||||
6.10 | 6.10EF | 6.11 | 6.12 | 6.13 | 6.14 | |
V6.3.2 |
|
|
| Not supported | Not supported | Not supported |
V6.4 |
|
| Not supported | Not supported | Not supported | |
V7.0 |
|
| Not supported | Not supported | Not supported | |
V7.1 |
|
| Not supported | Not supported | Not supported | |
V7.2 |
|
| Not supported | Not supported | Not supported | |
V7.3 |
|
| Not supported | Not supported | Not supported | |
V7.4 |
|
| Not supported | Not supported | Not supported | |
V7.5 |
|
| Not supported | Not supported | Not supported | |
V7.6 | ||||||
V7.7 | ||||||
V7.8 | ||||||
2020-2 | ||||||
| Madymo version | Qualified Abaqus version - part 2 | ||||
| 2017x1,2 | 2018x | 2019x | 2020x | 2021x | |
| V6.3.2 | |||||
| V6.4 | |||||
| V7.0 | |||||
| V7.1 | |||||
| V7.2 | |||||
| V7.3 | |||||
| V7.4 | |||||
| V7.5 | |||||
| V7.6 |  | ||||
| V7.7 | | | |||
| V7.8 | Not supported | 3 | |||
| 2020-2 | 4 | | |||
1 Requires Abaqus 2017x FD01 or higher release
2 Use the SIMULIA Co-simulation
3 Requires Abaqus 2020 FD03 or higher release4 Requires Abaqus 2020 FD05 or higher
Abaqus supported platforms for Co-simulation with Madymo:
| Platforms | Abaqus Release - part 1 | |||||
6.10 | 6.10EF | 6.11 | 6.12 | 6.13 | 6.14 | |
Window/x86-64 | ||||||
Linux/x86-64 |
|
|
| Not supported | Not supported | Not supported |
| Platforms | Abaqus Release - part 2 | |||||
| 2016x | 2017x | 2018x | 2019x | 2020x | 2021x | |
| Window/x86-64 | | | Not supported | | | |
| Linux/x86-64 | Not supported | | | Not supported | | |
Co-simulation using the Mesh-based parallel Code Coupling Interface aka MpCCI
Co-simulation using the MpCCI interface allows coupling Abaqus to MpCCI compliant third-party codes. Third-party codes coupling with Abaqus are qualified and supported by Fraunhofer SCAI. The data provided on this page is based on information SIMULIA receives from Fraunhofer SCAI. Please contact Fraunhofer SCAI for further information or support.
| MpCCI Version | Qualified Abaqus version - part 1 | |||||
6.10 | 6.10EF | 6.11 | 6.12 | 6.13 | 6.14 | |
4.1 |
|
|
| |||
4.2 |
|
|
| |||
4.3 |
|
|
| |||
4.4 |
|
|
| |||
4.5 | ||||||
4.6 | ||||||
4.7 | ||||||
| MpCCI Version | Qualified Abaqus version - part 2 | |||||||
| 2016x | 2017x | 2018x | 2019x | 2020x | 2021x | 2022x | 2023x | |
| 4.1 | ||||||||
| 4.2 | ||||||||
| 4.3 | ||||||||
| 4.4 | 1 | 1 | ||||||
| 4.5 | 1 | 1 | 1 | |||||
| 4.6 | 1 | 1 | 1 | 1 | 1 | 1 | ||
| 4.7 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
1 MpCCI Version 4.4 and onward use the MpCCI Connector to couple with the SIMULIA Co-Simulation Engine.
| Platforms | Abaqus Release - part 1 | |||||
6.10 | 6.10EF | 6.11 | 6.12 | 6.13 | 6.14 | |
Windows/x86-32 |
|
|
|
|
| |
Windows/x86-64 |
|
|
|
|
|
|
Linux/x86-64 |
|
|
|
|
|
|
Linux/x86-32 |
|
|
|
|
| |
| Platforms | Abaqus Release - part 2 | |||||||
| 2016x | 2017x | 2018x | 2019x | 2020x | 2021x | 2022x | 2023x | |
| Windows/x86-32 | ||||||||
| Windows/x86-64 | | | | | | | | |
| Linux/x86-64 | | | | | | | | |
| Linux/x86-32 | ||||||||
It is expected that co-simulation can be performed with the MpCCI interface running on other platforms not supported by Abaqus. For a full list of platforms supported by MpCCI, contact Fraunhofer SCAI.
Co-simulation with Abaqus and FLUENT requires MpCCI from Fraunhofer SCAI. The co-simulation between Abaqus and FLUENT is jointly qualified and supported by SIMULIA, ANSYS Inc. and Fraunhofer SCAI. Co-Simulation with MpCCI and FLUENT has been qualified with the structural and fluid analyses running on the same platform by SIMULIA. The tables below indicate version compatibility among these products and the platforms that are supported.
| FLUENT release | Qualified Abaqus version | |||||
6.10 | 6.10EF | 6.11 | 6.12 | 6.13 | 6.14 | |
6.3 | ||||||
12.0 | MpCCI 4.1 | MpCCI 4.1 | MpCCI 4.1 | MpCCI 4.2 MpCCI 4.4 | MpCCI 4.2 MpCCI 4.4 | MpCCI 4.4 |
13.0 | MpCCI 4.2 | MpCCI 4.3 MpCCI 4.4 | MpCCI 4.4 | |||
14.0 |
| MpCCI 4.3 | MpCCI 4.4 | |||
14.5 |
| MpCCI 4.3 MpCCI 4.4 | MpCCI 4.4 MpCCI 4.5 | |||
15 | MpCCI 4.3 MpCCI 4.4 | MpCCI 4.4 MpCCI 4.5 | ||||
16 - 16.2 |
| MpCCI 4.4 MpCCI 4.5 | ||||
17 - 17.2 |
| MpCCI 4.5 | ||||
18 - 18.2 |
| MpCCI 4.5 | ||||
19 - 19.2 | MpCCI 4.5 | |||||
20.1 - 20.2 | ||||||
21.1 - 21.2 | ||||||
22.1 - 22.2 | ||||||
23.1 | ||||||
| FLUENT release | Qualified Abaqus version part 2 | |||||||
| 2016x | 2017x | 2018x | 2019x | 2020x | 2021x | 2022x | 2023x | |
| 6.3 | ||||||||
| 12.0 | MpCCI 4.4 | |||||||
| 13.0 | MpCCI 4.4 | |||||||
| 14.0 | MpCCI 4.4 | |||||||
| 14.5 | MpCCI 4.4 MpCCI 4.5 | MpCCI 4.5 | MpCCI 4.5 | |||||
| 15 | MpCCI 4.4 MpCCI 4.5 | MpCCI 4.5 | MpCCI 4.5 | |||||
| 16 - 16.2 | MpCCI 4.4 MpCCI 4.5 | MpCCI 4.5 | MpCCI 4.5 | MpCCI 4.6 | MpCCI 4.6 MpCCI 4.7 | MpCCI 4.6 MpCCI 4.7 | MpCCI 4.7 | MpCCI 4.7 |
| 17 - 17.2 | MpCCI 4.5 | MpCCI 4.5 | MpCCI 4.5 | MpCCI 4.6 | MpCCI 4.6 MpCCI 4.7 | MpCCI 4.6 MpCCI 4.7 | MpCCI 4.7 | MpCCI 4.7 |
| 18 - 18.2 | MpCCI 4.5 | MpCCI 4.5 | MpCCI 4.5 | MpCCI 4.6 | MpCCI 4.6 MpCCI 4.7 | MpCCI 4.6 MpCCI 4.7 | MpCCI 4.7 | MpCCI 4.7 |
| 19 - 19.2 | MpCCI 4.5 | MpCCI 4.5 | MpCCI 4.5 | MpCCI 4.6 | MpCCI 4.6 MpCCI 4.7 | MpCCI 4.6 MpCCI 4.7 | MpCCI 4.7 | MpCCI 4.7 |
| 20.1 - 20.2 | MpCCI 4.6 MpCCI 4.7 | MpCCI 4.6 MpCCI 4.7 | MpCCI 4.7 | MpCCI 4.7 | ||||
| 21.1 - 21.2 | MpCCI 4.6 MpCCI 4.7 | MpCCI 4.6 MpCCI 4.7 | MpCCI 4.7 | MpCCI 4.7 | ||||
| 22.1 - 22.2 | MpCCI 4.6 MpCCI 4.7 | MpCCI 4.6 MpCCI 4.7 | MpCCI 4.7 | MpCCI 4.7 | ||||
| 23.1 | MpCCI 4.6 MpCCI 4.7 | MpCCI 4.6 MpCCI 4.7 | MpCCI 4.7 | MpCCI 4.7 | ||||
Abaqus supported platforms for Co-simulation with FLUENT:
| Platforms | Abaqus Release - part 1 | |||||
6.10 | 6.10EF | 6.11 | 6.12 | 6.13 | 6.14 | |
Windows/x86-32 |
|
|
|
| ||
Windows/x86-64 |
|
|
|
|
|
|
Linux/x86-64 |
|
|
|
|
|
|
Linux/x86-32 |
|
|
| |||
| FLUENT release | Qualified Abaqus version - part 2 | |||||||
| 2016x | 2017x | 2018x | 2019x | 2020x | 2021x | 2022x | 2023x | |
| 6.3 | ||||||||
| 12.0 | MpCCI 4.4 | |||||||
| 13.0 | MpCCI 4.4 | |||||||
| 14.0 | MpCCI 4.4 | |||||||
| 14.5 | MpCCI 4.4 MpCCI 4.5 | MpCCI 4.5 | MpCCI 4.5 | |||||
| 15 | MpCCI 4.4 MpCCI 4.5 | MpCCI 4.5 | MpCCI 4.5 | |||||
| 16 - 16.2 | MpCCI 4.4 MpCCI 4.5 | MpCCI 4.5 | MpCCI 4.5 | MpCCI 4.6 | MpCCI 4.6 MpCCI 4.7 | MpCCI 4.6 MpCCI 4.7 | MpCCI 4.7 | MpCCI 4.7 |
| 17 - 17.2 | MpCCI 4.5 | MpCCI 4.5 | MpCCI 4.5 | MpCCI 4.6 | MpCCI 4.6 MpCCI 4.7 | MpCCI 4.6 MpCCI 4.7 | MpCCI 4.7 | MpCCI 4.7 |
| 18 - 18.2 | MpCCI 4.5 | MpCCI 4.5 | MpCCI 4.5 | MpCCI 4.6 | MpCCI 4.6 MpCCI 4.7 | MpCCI 4.6 MpCCI 4.7 | MpCCI 4.7 | MpCCI 4.7 |
| 19 - 19.2 | MpCCI 4.5 | MpCCI 4.5 | MpCCI 4.5 | MpCCI 4.6 | MpCCI 4.6 MpCCI 4.7 | MpCCI 4.6 MpCCI 4.7 | MpCCI 4.7 | MpCCI 4.7 |
| 20.1 - 20.2 | MpCCI 4.6 MpCCI 4.7 | MpCCI 4.6 MpCCI 4.7 | MpCCI 4.7 | MpCCI 4.7 | ||||
| 21.1 - 21.2 | MpCCI 4.6 MpCCI 4.7 | MpCCI 4.6 MpCCI 4.7 | MpCCI 4.7 | MpCCI 4.7 | ||||
| 22.1 - 22.2 | MpCCI 4.6 MpCCI 4.7 | MpCCI 4.6 MpCCI 4.7 | MpCCI 4.7 | MpCCI 4.7 | ||||
| 23.1 | MpCCI 4.6 MpCCI 4.7 | MpCCI 4.6 MpCCI 4.7 | MpCCI 4.7 | MpCCI 4.7 | ||||
Co-simulation with Abaqus and STAR-CD from CD-adapco requires MpCCI from Fraunhofer SCAI. The co-simulation between Abaqus and STAR-CD is qualified and supported by Fraunhofer SCAI. The tables below indicate version compatibility among these products and the platforms that are supported.
| STAR-CD release | Qualified Abaqus version | |||||
6.10 | 6.10EF | 6.11 | 6.12 | 6.13 | 6.14 | |
4.14 | MpCCI 4.1 | MpCCI 4.1 | MpCCI 4.1 |
|
| |
4.16 |
|
|
| MpCCI 4.2 MpCCI 4.3 MpCCI 4.4 | MpCCI 4.2 MpCCI 4.3 MpCCI 4.4 | MpCCI 4.4 MpCCI 4.5 |
4.18 | MpCCI 4.4 | MpCCI 4.4 | MpCCI 4.4 MpCCI 4.5 | |||
4.20 | MpCCI 4.4 MpCCI 4.5 | |||||
4.22 | MpCCI 4.4 | MpCCI 4.4 | MpCCI 4.4 MpCCI 4.5 | |||
| STAR-CD release | Qualified Abaqus version - part 2 | |||
| 2016x | 2017x | 2018x | 2019x | |
| 4.14 | ||||
| 4.16 | MpCCI 4.4 MpCCI 4.5 | MpCCI 4.5 | MpCCI 4.5 | |
| 4.18 | MpCCI 4.4 MpCCI 4.5 | MpCCI 4.5 | MpCCI 4.5 | |
| 4.20 | MpCCI 4.4 MpCCI 4.5 | MpCCI 4.5 | MpCCI 4.5 | |
| 4.22 | MpCCI 4.4 MpCCI 4.5 | MpCCI 4.5 | MpCCI 4.5 | |
Abaqus supported platforms for Co-simulation with STAR-CD:
| Platforms | Abaqus Release - part 1 | |||||
6.10 | 6.10EF | 6.11 | 6.12 | 6.13 | 6.14 | |
Windows/x86-32 |
|
|
| |||
Windows/x86-64 |
|
|
|
|
|
|
Linux/x86-64 |
|
|
|
|
|
|
Linux/x86-32 |
|
|
| |||
| Platforms | Abaqus Release - part 2 | ||
| 2016x | 2017x | 2018x | |
| Windows/x86-32 | |||
| Windows/x86-64 | | | |
| Linux/x86-64 | | | |
| Linux/x86-32 | |||
It is expected that Co-Simulation can be performed with the CFD analysis running on other platforms not supported by Abaqus. For a full list of platforms supported by MpCCI and STAR-CD, contact Fraunhofer SCAI.
Co-simulation with Abaqus and FINE/Hexa, FINE/Open and FINE/Turbo from Numeca Intl. requires MpCCI from Fraunhofer SCAI. The co-simulation between Abaqus and FINE/Hexa, FINE/Open and FINE/Turbo is qualified and supported by Fraunhofer SCAI. The tables below indicate version compatibility among these products and the platforms that are supported.
| FINE/Hexa release | Qualified Abaqus version - part 1 | |||||
6.10 | 6.10EF | 6.11 | 6.12 | 6.13 | 6.14 | |
2.10-4 | MpCCI 4.1 | MpCCI 4.1 | MpCCI 4.1 | MpCCI 4.2 MpCCI 4.3 MpCCI 4.4 | MpCCI 4.2 MpCCI 4.3 MpCCI 4.4 | MpCCI 4.4 |
2.11 | MpCCI 4.2 MpCCI 4.3 MpCCI 4.4 | MpCCI 4.2 MpCCI 4.3 MpCCI 4.4 | MpCCI 4.4 | |||
| FINE/Hexa release | Qualified Abaqus version - part 2 | |||||||
| 2016x | 2017x | 2018x | 2019x | 2020x | 2021x | 2022x | 2023x | |
| 2.10-4 | MpCCI 4.4 | |||||||
| 2.11 | MpCCI 4.4 | |||||||
FINE/Open release | Qualified Abaqus version - part 1 | |||||
6.10 | 6.10EF | 6.11 | 6.12 | 6.13 | 6.14 | |
2.11 | MpCCI 4.2 MpCCI 4.3 MpCCI 4.4 | MpCCI 4.2 MpCCI 4.3 MpCCI 4.4 | MpCCI 4.4 | |||
2.12 | MpCCI 4.2 MpCCI 4.3 MpCCI 4.4 | MpCCI 4.2 MpCCI 4.3 MpCCI 4.4 | MpCCI 4.4 | |||
4.1 | MpCCI 4.4 | MpCCI 4.4 | MpCCI 4.4 MpCCI 4.5 MpCCI 4.6 | |||
4.2 | MpCCI 4.4 | MpCCI 4.4 | MpCCI 4.4 MpCCI 4.5 MpCCI 4.6 | |||
4.3 | MpCCI 4.4 | MpCCI 4.4 | MpCCI 4.4 MpCCI 4.5 MpCCI 4.6 | |||
5.1 - 5.2 | MpCCI 4.5 MpCCI 4.6 | |||||
6.1 | MpCCI 4.5 MpCCI 4.6 | |||||
6.2 | MpCCI 4.6 | |||||
7.1 | MpCCI 4.6 | |||||
10.1 | ||||||
| FINE/Open release | Qualified Abaqus version - part 2 | |||||||
| 2016x | 2017x | 2018x | 2019x | 2020x | 2021x | 2022x | 2023x | |
| 2.11 | MpCCI 4.4 | |||||||
| 2.12 | MpCCI 4.4 | |||||||
| 4.1 | MpCCI 4.4 MpCCI 4.5 MpCCI 4.6 | MpCCI 4.5 MpCCI 4.6 | MpCCI 4.5 MpCCI 4.6 | MpCCI 4.6 | ||||
| 4.2 | MpCCI 4.4 MpCCI 4.5 MpCCI 4.6 | MpCCI 4.5 MpCCI 4.6 | MpCCI 4.5 MpCCI 4.6 | MpCCI 4.6 | ||||
| 4.3 | MpCCI 4.4 MpCCI 4.5 MpCCI 4.6 | MpCCI 4.5 MpCCI 4.6 | MpCCI 4.5 MpCCI 4.6 | MpCCI 4.6 | ||||
| 5.1 - 5.2 | MpCCI 4.5 MpCCI 4.6 | MpCCI 4.5 MpCCI 4.6 | MpCCI 4.5 MpCCI 4.6 | MpCCI 4.6 | ||||
| 6.1 | MpCCI 4.5 MpCCI 4.6 | MpCCI 4.5 MpCCI 4.6 | MpCCI 4.5 MpCCI 4.6 | MpCCI 4.6 | ||||
| 6.2 | MpCCI 4.6 | MpCCI 4.6 | MpCCI 4.6 | MpCCI 4.6 | ||||
| 7.1 | MpCCI 4.6 | MpCCI 4.6 | MpCCI 4.6 | MpCCI 4.6 | ||||
| 10.1 | MpCCI 4.7 | MpCCI 4.7 | MpCCI 4.7 | MpCCI 4.7 | MpCCI 4.7 | MpCCI 4.7 | MpCCI 4.7 | |
FINE/Turbo release | Qualified Abaqus version | |||||
6.10 | 6.10EF | 6.11 | 6.12 | 6.13 | 6.14 | |
8.9 | MpCCI 4.1 | MpCCI 4.1 | MpCCI 4.1 | MpCCI 4.2 MpCCI 4.3 MpCCI 4.4 | MpCCI 4.2 MpCCI 4.3 MpCCI 4.4 | MpCCI 4.4 |
8.10 | MpCCI 4.2 MpCCI 4.3 MpCCI 4.4 | MpCCI 4.2 MpCCI 4.3 | ||||