# T40-2026 - Notification regarding BIOVIA Foundation, Compose, and Capture 2026 HF4

We are providing this Technical Note to inform you about the release of BIOVIA Foundation, Compose, and Capture 2026 HF4 which includes the following enhancements and fixed defects.

## Program

BIOVIA Foundation, Compose, and Capture

## Operating System

All supported operating systems

## Description

We are providing this Technical Note to inform you about the release of BIOVIA Foundation, Compose, and Capture 2026 HF4 which includes the following enhancements and fixed defects:

## <a name="_Hlk245724102"></a>Enhancements

This release of BIOVIA Foundation, Compose, and Capture includes the following enhancements.

#### 2026 HF1 Enhancements

Foundation, Compose, and Capture 2026 HF1 includes the following enhancements.

| **User Story** | <a name="_Hlk245724056"></a>**Description** |
|---|---|
| CAPT-10040 | When you execute a Data Acquisition Task and select equipment during a manual entry, the list of equipment now shows all the available equipment and is no longer limited to the Equipment Class or Equipment Type mapped to the parameter. This change does not affect other types of tasks, and it does not affect the equipment list outside of a manual entry. |
| CAPT-10083 | When you manually enter quantities for Data Acquisition tasks, you can now select all the units that are configured for the given parameter template. |
| DAT-31114 | PD Scientists can define key vessels and parameters before data collection, ensuring the unified result view highlights only the most relevant data. |
| SEC-11319 | Laboratory services can now be notified when measurements are created or updated for a specific piece of equipment to enable automated workflow updates. |
| DAT-31115 | You can now create Bioreactor Workflows to automatically monitor the equipment measurement results. |

#### <a name="_Hlk245724139"></a>2026 Enhancements

Foundation 2026 includes the following enhancements.

| **User Story** | **Description** |
|---|---|
| CAPT-3196 | Global parameters are now available in procedure activities in addition to the previously supported step-level parameters. |
| CAPT-6836 | Review now shows the proper information for Simple Batch task executions. |
| CAPT-7133 | Formulation batch tasks now support interleaved instructions with or without structured process parameters if they are configured in the Formulation Design application. |
| CAPT-9140 | The defined "Wet Percent" of each ingredient action will be displayed in the continuous grid and side panel. |
| CAPT-9585 | Added new "BC: Clean and Sanitize" PET requiring a signed user confirmation that the workspace was cleaned and sanitized before batch start. |
| CAPT-9612 | The system now flags any manual CSV file uploads during Capture execution. Attempting a manual upload will trigger an aRBE exception and automatically activate a “Manual Upload” filter in Review. This is a non-configurable core feature and applies to both Data Acquisition and Procedure activities. Users will see a specific message indicating that the action failed due to a manual upload. |
| CAPT-9680 | In Simple Batch and Procedure executions on 3Dx Platform, the container scan now validates the container first against the planned inventory material ID, and if there is no relationship it triggers a warning and a Material Exception signature. If there is not material ID, validation proceeds against material name and synonym, as before. Container validation in Science Cloud and on-premise is unchanged. |
| CAPT-9853 | If the latest event for an instrument is a failed, unscheduled maintenance event, this causes a Metrology Exception and fails Auto-Review by Exception. |
| DAT-17928 | Updated History pages to display changes to Activity Parameters (planned values, lower/upper limits, etc.) and Task Parameters. |
| DAT-25543 | Study results in the analyze grid that are related to a task can be manually overridden. |
| DAT-27922 | Creating a batch from Formula Design, system now downloads the formula details asynchronously. |
| DAT-28209 | Batch Release &amp; Formulation Batch Plan studies have buttons to allow ad hoc Activities |
| DAT-29281 | System now supports use of Material ID when scanning container IDs. |
| DAT-30152 | Workflow now displays the lifecycle state of the "make Activity" task. |
| DAT-30164 | It is now possible to edit Workflow properties in the Background section when the workflow is In Progress state. |
| DAT-30206 | Message Listener clients can now differentiate between the entity operation that initiated the callback, e.g. insert, update, lifecycle change, or delete. |
| DAT-30341 | Registered materials from Capture are now of type Formulated Materials |
| DAT-30600 | To stay current on the supported versions, the latest versions of Java 11 and Tomcat 9 have been updated. |
| DAT-30633 | Now possible to assign one or more Equipment Classes to an Activity. |
| DAT-30634 | Each instance of High-Value Equipment can be assigned to a specific Hub Group. |
| DAT-30698 | Developers now have an endpoint for disposing a Container |
| DAT-30715 | Simple Batch Activity now supports use of Classification Levels |
| DAT-30835 | Workflow's Background section now displays the Collaborative Space. |
| DAT-30883 | Selected Material Lots and corresponding Specification or Sample Plan Versions expanded to display distinguishing details. |
| DAT-30925 | You can now add conditional values in the extended properties of a Study. |
| DAT-30959 | Stability Workflow now separates the sample pull date from the testing window date. |
| DAT-30966 | Stability Workflow now populates existing OOTB Sample properties Planned Collection Date, Stability Time Point, Stability Temperature (C), Stability Humidity (%RH), and Stability Stress String. |
| DAT-30969 | Added a date range filter and a recursive location-based filter to the Worklist Widget (Samples to Pull Widget) |
| DAT-31211 | You can now add a signature policy to the to the Lifecycle Policy transition: Study &gt; Completed &gt; Reopen Study. |
| DAT-31266 | The Stability Workflow now support manually overriding the task's results. |
| DAT-31355 | Plate object added to support plate-based workflows. |
| DAT-31385 | To streamline the management and submission of plated samples to the testing lab, administrators can now control whether the Plate tab displays in a Task Plan and in which types of Task Plans. This solution integrates directly with a BIOVIA Services–developed Plate tool. |
| DAT-31388 | For efficient execution of high-throughput workflows, you can now assign an Activity to an entire plate of samples. |
| DAT-31879 | A Study Report Protocol has been added to the Database and Application Integration -&gt; Application Integration -&gt; Laboratory -&gt; Operations folder in Pipeline Pilot. |
| PROP-10598 | Process Element Templates can now be edited and saved with their step-level signature settings for Data Entry and Data Verification. |
| PROP-11900 | Material ID is now an available field in procedure activities. This ID can be used for more precise container validation on the 3DEXPERIENCE Platform instead of just material name and synonym. Material ID has no functional purpose for integration with CISPro at this time. |
| PROP-11972 | BIOVIA Compendia process element templates are now included as an improvement to the previously provided standard library content for Compose, supporting use cases in pharmaceutical development. |
| PROP-12553 | Global parameters are now available in procedure activities in addition to the previously supported step-level parameters. |
| PROP-12554 | Global parameters are now available in procedure activities in addition to the previously supported step-level parameters. |
| PROP-12555 | Global parameters are now available in procedure activities in addition to the previously supported step-level parameters. |
| PROP-12830 | Process Element Templates are now managed with respect to collaborative spaces in a manner similar to how activities are. |
| PROP-9797 | Global parameters are now available in procedure activities in addition to the previously supported step-level parameters. |
| SEC-11003 | Metrology due dates can now be scheduled for the end of a week, month, or year. Existing metrology events continue to calculate the next due date based on the date the event was last successfully completed. |
| SEC-11318 | To improve the speed of measurement retrieval and enable retrieval of larger measurements, you can now retrieve a subset of the measurement’s readings. This story applies to measurements based on equipment class readings. |
| SEC-11407 | During data acquisition, the data preview page now has an increased viewing capacity of instrument measurements and performance. \* For larger measurement, the data preview page now displays only the columns of data that are needed for the requested parameters in an execution. \* The data preview page automatically opens only measurements that can be mapped to the current task. Measurements that are already mapped to tasks do not open. \* You can now map samples for measurements up to 150,000 data points, and an error message displays if the measurement exceeds this limit. \* You can download a comma-separated value (CSV) file of the full measurement if you need to review additional data. |
| SEC-11424 | Data acquisition tasks with instrument data that was automatically applied can now automatically complete and release. The task automatically completes if each sample has at least one result. Otherwise, it remains in progress. The auto-completed tasks then auto-release if the tasks' lifecycle is configured to allow auto-release, and all the review criteria is met. |
| SEC-11433 | You can now retrieve a subset of the measurement’s readings, which improves the speed of measurement retrieval and enables the retrieval of larger measurements than was previously possible. This story applies to measurements based on data packets. |
| SEC-8453 | A signature can now be required when recording an unscheduled maintenance event or using the Edit button to record a scheduled maintenance event for equipment. This feature is configured by assigning signature policies to the Manual Metrology lifecycle action in the Equipment lifecycle. |
| SEC-8717 | Reference data can now be exported from the entity's Admin and Settings page. One or more reference data can be selected and exported. Administrators may still export all reference data from the Migrations page in Admin and Settings. |
| CAPT-10000 | The Process execution API has been updated for better use in the Pipeline Pilot scripts. |
| CAPT-10097 | The material addition Process Element Template now has Data Entry and Data Verification enabled, so all material addition steps in Simple Batch will requires those signatures as defined by the Lifecycle Policy. |
| CAPT-6507 | When a container is scanned its certification for use in the execution is validated. When the contents of a scanned container do not meet the requirements of the workflow, it triggers a warning and a material exception signature. |
| CAPT-6508 | It is now possible to scan or enter an unregistered container ID, random text, or 'N/A' for the material scan in Capture. If the container ID is not validated in inventory, the user is warned and a material exception signature is presented. |
| DAT-17332 | Additional Hub Notifications created for Retest, Review, Correction Needed, Revert, Task Split, Task Delete, Task Abandon, and Task Plan transitions. |
| DAT-22065 | In a Task Plan and the widget grids, you can now sort the Collaborative Space, Pending Status, and Lifecycle Policy columns. |
| DAT-22837 | Added the ability to configure Signature Policies with a defined signing order, enabling control over approval sequence—for example, requiring QA to sign last. |
| DAT-25671 | Added support for defining exclusive limits (&lt; and &gt;) when configuring Specifications, providing greater flexibility when evaluating them in Workflows. |
| DAT-27846 | Hub configuration switch allows limited use of Request and Split to Task Plan. |
| DAT-27982 | Now possible to configure a signature on Task Plan &gt; Completed &gt; Withdrawn transition |
| DAT-28181 | Enumerate action can be applied to all timepoints, or selectively. By delaying enumeration of later timepoints, you keep the flexibility to adjust the design as needed. |
| DAT-28867 | Given a Workflow with a Specification that includes a string parameter then the parameter displays in the Analyze grid. |
| DAT-30036 | Batch Release workflow enhanced to support additional Candidates. |
| DAT-30056 | Sample Plan option added to support those configurations where not all Activities have samples. |
| DAT-30151 | Add optional rules for how Lifecycle Policy is assigned when creating Samples and Tasks. |
| DAT-30635 | To stay on track, you can now schedule tasks directly onto specific equipment. |
| DAT-31151 | Added an option to physically track Stability inventory as Hub Samples, automatically creating one Hub Sample of EACHES unit per storage condition. |
| DAT-31152 | Enabled editing of the start date for samples and tasks within In Progress Stability Workflows, provided they have not yet been started. |
| DAT-31261 | You can now create a Stability Workflow directly from a Completed or Released Batch Release workflow, which automatically populates the T0 timepoint with the Batch Release results. |
| SEC-11303 | Data acquisition activities can now be configured to allow automatic data acquisition. When an activity is so configured, the system will automatically apply a new measurement to a data acquisition task as long as the measurement contains the task ID (ex: Tnnnn). The task must be in a writable state and not have any manual data entry or manual data acquisitions. This is supported when using class reading equipment commands. |
| CAPT-8532 | Simple Batch tasks now properly support interleaved processing instructions without parameters from Formulation Designer. |
| CAPT-8545 | The material addition steps in Simple Batch are now generated from a backing unit op PET "BC: Direct Weigh", and default to direct weigh for amount collection. |
| CAPT-9276 | The equipment grids no longer display the live equipment status. In the expanded equipment grid, you can now select the !-icon to view the status at the time of use. |
| DAT-24554 | Added support for defining different Sample Types when Sequence Activities create samples, allowing more precise control over sample classification which the CDS Add-in requires. |
| DAT-29259 | Added notifications to alert users when a newer Specification version is available, allowing them to optionally upgrade their In Progress workflow. |
| DAT-29864 | Sample Plan enhanced to allow setting Document ID and Task Lifecycle Policy |
| DAT-29915 | Sequence Activity Tasks can now be batched and executed together. |
| SEC-11302 | The equipment measurement viewer now has a stronger capacity to handle larger measurements. \* You can now view data points of up to 150,000. \* You can download comma-separated value (CSV) files of measurements larger than 150,000 data points. You can view these in Microsoft Excel or other CSV-viewing applications. |
| DAT-23627 | Added support for redesigning an approved Stability Study Workflow even after execution has begun. |
| SEC-11174 | The integration gateway was updated to a newer release of Node.js. |
| DAT-29197 | The Grails Framework has been updated to version 5 to stay current. |

## Fixed Defects

This release of BIOVIA Foundation, Compose, and Capture includes the following fixed defects.

#### 2026 HF4 Fixed Defects

Foundation, Compose, and Capture 2026 HF4 includes the following fixed defects.

| **Defect** | **Description** |
|---|---|
| DAT-33683 | Optimized retrieval of ACL records from the database to prevent high memory usage when there are a high volume of ACL records in the database. |

#### 2026 HF3 Fixed Defects

Foundation, Compose, and Capture 2026 HF3 includes the following fixed defects.

| **Defect** | **Description** |
|---|---|
| PROP-13192 | Detection of process element step number for a process parameter used in a summary expression is now checking all characters, not just the first character; truncation no longer occurs. |
| PROP-13210 | Fixed an issue where an expression editor showed an erroneous invalid error, which did not prevent recipe save. The erroneous error is no longer thrown. |

#### 2026 HF2 Fixed Defects

Foundation, Compose, and Capture 2026 HF2 includes the following fixed defects.

| **Defect** | **Description** |
|---|---|
| DAT-33195 | Fixed a rare database migration issue when upgrading from 2024 SP1 HFx to 2026 HF1. |
| DAT-33224 | It is no longer necessary to include the "filter" section in the subscriber JSON necessary for triggering subscriber protocols after upgrading from 2024 SP1 HFx. |

#### 2026 HF1 Fixed Defects

Foundation, Compose, and Capture 2026 HF1 includes the following fixed defects.

| **Defect** | **Description** |
|---|---|
| DAT-32410 | You can now edit properties with more than 1000 values without a reported error. |
| CAPT-10297 | You can run a metrology task, and the execution picks up the latest activity and planned values as expected. |
| CAPT-10308 | When you fill down (Ctrl+D) values in the equipment-mapped parameters, the equipment associated with the values is now identified and propagated, and there is no longer an error. |
| CAPT-10317 | When you fill down (Ctrl+D) values in the equipment-mapped parameters, the equipment associated with the values is now identified and propagated. |
| CAPT-10342 | The "Release Selected" functionality in Review works in multi-byte locales. |
| CAPT-10359 | When you reversion a child activity in a collaborative space in which "Use Latest Activity" is set to IncludeParentVersion, the planned values now behave as expected. |
| CAPT-10380 | Reports generate successfully for executions that are in partially signed states. |
| CAPT-10383 | The execution and Review signature dialogs function correctly in multi-byte locales. |
| CAPT-10390 | The review filters and drop-downs display the correct information for values that are mapped to material containers. |
| DAT-30761 | Hub Linux service now runs as an unprivileged user. |
| DAT-31284 | Ad Hoc Activities from Sample Plans are now validated for analysis and quality attribute so they can be used in a Worfklow. |
| DAT-31840 | When the units are not set in the Specification, the Workflow Parameters now use the units set in the Activity. |
| DAT-32220 | You can now configure the system to notify other users when a Task Plan moves to the In Progress state. |
| DAT-32543 | When filtering for materials, system will now inform the user when there are too many results to display instead of showing no results to display. |
| DAT-32597 | After you remove specifications, a misleading error message no longer displays when you retrieve the Workflow results. |
| DAT-32608 | Auto-upgrade of approved Sample Plans now works properly. |
| DAT-32650 | Batch Workflow now shows the correct list of Activities when setting the Make Activity. |
| DAT-32669 | The Hub Linux upgrade now works for RHEL 8. |
| DAT-32731 | Prevented a Database Connection leak if a deadlock exception occurred when polling the database for new background messages to process. |
| DAT-32791 | Hub Linux shutdown.sh now properly shuts down the Hub service. |
| DAT-32808 | Hub Linux service no longer installed as root. |
| DAT-32809 | When trying to install Hub on Linux when the Hub service is running, user will now be asked to stop the running service before proceeding. |
| DAT-32811 | Hub Linux upgrade when existing installation is a service now will now properly detect when previous installation owned by root and terminate with helpful message. |
| DAT-32817 | Hub Linux installer has removed an incorrect command line parameter and now uses the correct garbage collection algorithm. |
| DAT-32860 | The Hub Linux installer no longer allows for a blank keystore password. |
| DAT-32871 | During an upgrade, the Hub Linux installer no longer erases the keystore password setting. |
| DAT-32936 | The Batch Workflow Set Make Activity dialog now shows the proper list of Activities. |
| PROP-12968 | In the Expression Editor, the summary select now recognizes parameters containing a hyphen in the display name. |
| SEC-11104 | During the equipment file loading, there is no longer a timing issue that might fail a parser job. |
| SEC-11648 | To improve the Empower Integration, the add-in better maps the Empower data fields to the results CSV file. The results now send to the measurement store up to 90% faster (not including reports). |
| SEC-11728 | Improved the security of the migrations page in Admin and Settings. |
| SEC-11776 | The data preview page now correctly applies the group by flag to group samples within the measurement. |
| CAPT-10274 | If you change the step through the instructions card when a container scan is in progress, the scan now fails with an error message. You must rescan the container. |
| CAPT-10346 | When you clone a child activity with proxy materials and re-version the clone with new planned material names, the execution uses the updated names. |
| DAT-31441 | As expected, a lifecycle subscriber protocol is no longer executed twice in some configurations. |
| DAT-32670 | Hub Linux install\_service.sh script no longer tries to stop the service if it is not running. |
| DAT-32671 | The Hub Linux install\_service.sh script no longer tries to start the service. |
| DAT-32707 | The Hub Datasource pools are now properly exposed as JMXBeans, and you can observe them in Melody. |
| DAT-32738 | If the Sample Name Templates are ambiguous when you execute Sequence Activities, the Sample Names revert to using the Sample Ids. |
| DAT-32769 | On Linux, the Hub heap memory is now properly set on service startup. |
| DAT-32925 | The supported OS message in the Hub Linux installer now includes the correct versions of RHEL. |
| DAT-32926 | The Hub Linux installer no longer has an errant check for init.d. |
| DAT-32927 | Hub Linux installer now properly checks for netstat installation before continuing. |
| PROP-12550 | A process tree with many steps now renders correctly when you scroll. |
| PROP-12990 | As expected, the lock icon now shows when someone without the Author/Recipe opens a Recipe. |
| PROP-13015 | You can now use "type ahead" to manually add sample mappings, without the risk of creating an invalid URN value. You can now reopen, edit, and clone the existing recipes with invalid URN values in sample mappings without error. The resulting clone is fixed. |
| PROP-13042 | The Procedure Approval Reports were generated as .html instead of .pdf. As expected, they now generate as .pdf files. |
| DAT-32692 | When you click a Specification in a non-Batch Workflow, it now links to the Specification page. |
| PROP-12948 | The Activation Condition preview now clears when you switch to a different Activation Condition. |

#### 2026 Fixed Defects

Foundation, Compose, and Capture 2026 includes the following fixed defects.

| **Defect** | **Description** |
|---|---|
| DAT-30768 | Fix a bug that didn't allow adding entries to the Sample Name Templates and Task Name Templates vocabularies. |
| DAT-31350 | Fixed an issue where samples created in the Task Plan were not appearing in the All Samples widget. |
| DAT-31594 | As expected, users with only the Foundation/View Activities permission cannot execute Activity lifecycle actions. For consistency with previous implementations, the lifecycle transitions now require the Foundation/Manage Activities permission. |
| DAT-31608 | The Import Material action in Workflows now behaves consistently with the Materials tab in Task Plans. |
| DAT-32023 | The sample relationships are maintained after you split an affiliate sample. |
| PROP-12422 | The re-authentication dialog now shows properly in Compose Hub's recipe view. |
| PROP-12636 | The Process Element Template editing view successfully opens when opening a process element template from the grid. |
| PROP-12858 | The system now handles cloning correctly, even when the \_Step\_ element includes a child \_Action\_ type process element. |
| PROP-12861 | As expected, the Split Task inherits the Sample Level Flag when you clone or reopen an Activity. |
| PROP-12899 | When Pipeline Pilot runs on Linux RHEL 9, Compose integrates with it as expected and you can create a directory from a zip file. |
| CAPT-10057 | In the Reports, the 'Updated By' section no longer shows updates that are associated with step view changes. This fix does not address historic data. |
| CAPT-10131 | The "Current User Excluded" signature policy now functions as expected on steps, which allows signatures from any users other than the current one. |
| CAPT-10219 | In the Review page, the validity and status fields are read-only when users do not have the right to modify values. |
| CAPT-10305 | The performance of the container scanning has improved. |
| CAPT-9718 | Min, max, and threshold values are now compared against the "reportedValue" field, which is already formatted using the defined rules. |
| CAPT-9977 | When you cannot abandon a step due to the state of other steps, the item state drop-down includes "Abandon Step Unavailable". Clicking this text shows an information popover that lists the steps that must be completed before you can abandon this step. |
| CAPT-9979 | When a step cannot be abandoned due to the status of other steps, the item state drop-down will include "Abandon Step Unavailable." Clicking this text will display an information popover that lists the steps that must be completed first before this step can be abandoned. |
| CAPT-9990 | The Data Modification signature is not incorrectly triggered when you link non-sample results from a combined execution. |
| CAPT-9999 | When the recipe phrasing is parsed, the '$' characters are detected and encoded so that they do not fail the subsequent processing. |
| DAT-26236 | Fixed an issue where navigating between the Audit History and Event View caused pages to fail loading or display errors due to invalid expressions. |
| DAT-29244 | Updated History pages to display changes to Activity Parameters (planned values, lower/upper limits, etc.) and Task Parameters. |
| DAT-29618 | In the Edit Tasks Parameters window, the tasks from a cloned Activity Plan no longer display the limits from the original Activity. |
| DAT-29863 | Added a permission check to ensure users can access the requestor’s Task Plan; if not, an error message is displayed. |
| DAT-30254 | Fixed an issue where the Sample History page incorrectly allowed filtering by Task. |
| DAT-30335 | Fixed an issue that prevented users from navigating away while editing a Sample Plan. |
| DAT-30363 | Upgraded the Worklist (formerly Samples to Pull) widget to improve performance when viewing a specific Stability Workflow. |
| DAT-30433 | Fixed an issue where filter by a property that is a URN generated an error |
| DAT-30569 | The Collaborator Group widget column no longer appears to be filterable |
| DAT-30624 | Fixed an issue where the audit history hyperlink did not navigate correctly when a Task Plan name was with a special character. |
| DAT-30692 | Added a notification explaining that configuring an Activity’s Parameters with duplicate Display Names has limited support. |
| DAT-30759 | Fixed an issue so that enumeration functions correctly, and tasks are now properly assigned to the requested group specified in the Sample Plan. |
| DAT-30760 | Fixed an issue where Ctrl-D did not copy the value into the selected rows. |
| DAT-30861 | Corrected an issue when sharing Task Plans across collaboration spaces. |
| DAT-30914 | Subscriptions are now created for Split Tasks. Previously Split Tasks would not cause Lifecycle Subscriber protocols to be called. |
| DAT-31095 | This issue was caused by AWS SQS service that can be configured to send gzipped file when downloading a stored file. IG was not handling the gzipped format. |
| DAT-31290 | Workflows now require a unique Analysis/Quality Attribute/Component on all Specification Method Characteristics within a given Specification Method. |
| DAT-31306 | Modified the query run by the Samples Widget for Task and Task Plan ID to be an exact match to improve performance |
| DAT-31341 | Fixed an issue where scanning a disposed container did not display an error message. |
| DAT-31383 | As expected, when you enable the Equipment Scheduling Calendar, tasks with multiple due dates display correctly in the Calendar view of the My Tasks widget. |
| DAT-31424 | As expected, you can now split task with two Lifecycle Subscriber protocols. Previously, this Split Tasks action failed if multiple Lifecycle Subscriber protocols were registered. |
| DAT-31435 | Fixed an issue allowing tasks with two lifecycle subscriber protocols to be split successfully. |
| DAT-31507 | You can remove an assignee in the Retest Task dialog as expected, and the assignee and group information is recorded correctly in the History page. |
| DAT-31578 | When you generate Certificates of Analysis (CoA), batch workflows that were created before R2024x FD04 without a ‘Certify Material Until Date’ parameter no longer cause a null error. |
| DAT-31629 | As expected, you can now delete the date value for data-type Extended Properties. |
| DAT-31793 | Fixed an issue in the affiliate sample process where residual state from handling a single sample could incorrectly affect subsequent actions when selecting multiple samples. |
| DAT-31834 | Fixed a frontend issue where setting an Equipment Class/Type on an Activity could result in a null context, preventing values from loading in the Parameters grid dropdown for mapping equipment readings. |
| DAT-32385 | As expected, you can now add a Sample Plan to the Time Point Logistics row in a Stability workflow. |
| DAT-32446 | Fixed an issue where enumerated studies did not correctly display task results across multiple specifications when the component field was used as a comment. |
| DAT-32511 | Fixed an issue where enumerated studies did not correctly display task results across multiple specifications when the component field was used as a comment. |
| DAT-32512 | From the Ad Hoc Activity dialog, you can now add the correct Activity types to the Workflow. |
| DAT-32558 | Duplicate asynchronous Workflows do not launch, so that the simultaneous update of the same data from multiple jobs no longer causes optimistic lock exceptions. |
| PROP-12271 | User data, as creator, is now included upon the initial creation of a Process Element Template. |
| PROP-12362 | The Compose web page no longer freezes when the sample mapping is removed and re-added. |
| PROP-12375 | Compose recipes that include 'recipe' in their name can now be executed or exported without error. |
| PROP-12379 | The match() function works as it did in 2023 SP1 HF3 when used in expressions with a RegEx string. |
| PROP-12449 | The expected validation error is now thrown when a user attempts to save a recipe containing a parameter with both actual expression and equipment mapping. |
| PROP-12568 | Recipe clones now reflect updates to the linked activity on the original recipe. |
| PROP-12623 | Activity parameters now maintain their sample level status in activity clones. |
| PROP-12713 | The cloned Process Element Templates now migrate successfully. |
| PROP-12725 | UI issues are no longer observed when clicking outside the Local List dialog on a global parameter. |
| PROP-12733 | The system no longer displays a default value of "0" when a numeric parameter planned value is cleared and the parameters are collapsed. Now, the cleared state is accurately retained and displayed, ensuring data integrity and preventing misleading values. |
| PROP-12736 | Numeric Parameter no longer shows 0 for empty planned value when all editors are collapsed. |
| PROP-12745 | The add parameter dialog functions as expected when material with scan container is present on the step. |
| PROP-12754 | When a sample extended property contains more than 100 properties, all the properties now render as expected. |
| PROP-12760 | The Recipe Comparison report now shows updated instructions. |
| PROP-12767 | In the Process Element Template (PET) Library: \* You can delete or upgrade a parameter either on the PET or from the PET, which enables the 'Save' button. \* In the identification details, edit mode now functions properly under all circumstances. \* Newly added parameters are now immediately visible when you edit them. |
| PROP-12775 | As expected, the activities and recipe clones include the parent recipe's extended properties. |
| PROP-12822 | Hub does not run out of Heap Memory when you bootstrap ParameterTemplates/Unit Operations. |
| PROP-12835 | You can now save Process Element Templates that contain an appended parallel step. |
| PROP-12853 | The French language messages display correctly. |
| PROP-12928 | As expected, you can edit an imported, approved Master Recipe with a Draft activity. |
| PROP-12942 | The save button is now enabled when you double-click a Process Element Template to open it in edit mode. |
| PROP-12953 | As expected, the Sample Mappings now clear when you remove the sample from a cloned step. |
| PROP-12954 | As expected, you cannot add a child step Process Element to a 'Step' type Process Element Template. |
| SEC-10797 | Migrations no longer fail when there is a GUID mismatch in the Location Type hierarchy. |
| SEC-11116 | Improved WebSocket connection handling to reduce potential status reporting problems. |
| SEC-11180 | Increased the maximum vocabulary name length that can be handled during a migration. |
| SEC-11258 | Corrected a problem that caused French language messages to be displayed incorrectly. |
| SEC-11345 | When an equipment resource is in use and another process requests it, the error now produces a message. |
| SEC-11352 | The system retrieves and displays large measurements better. The measurements of 150,000 data points now display, and you can download larger measurements to view offline. |
| SEC-11353 | The example protocol "Hub Groups and Users Upload Example" is obsolete and has been removed. |
| SEC-11373 | You can now import the vocabulary entries in the task's results into Empower's sample sets. |
| SEC-11384 | You can now migrate equipment that is configured with a scheduling group. |
| SEC-11401 | When you edit a user account from the Related Groups section to remove a group relationship, and more than one relationship exists in the same group, the selected entry is correctly removed. |
| SEC-11604 | When a task is in a collaborative space that has been given access to more than 100 individual users (not groups), you can now import the sample data to Empower. |
| SEC-11635 | After you delete an existing WebSocket sessions through API, you no longer need to restart the Hub service to reestablish an integration gateway WebSocket connection. |
| CAPT-10082 | When a process element template in a Formula defines parameters with range, but no target planned values, they are properly shown in Capture Hub. |
| CAPT-10108 | As expected, the material exceptions display in Review only when a signature was applied and signed to properly notify when an exception was encountered. |
| CAPT-10125 | As expected in the continuous grid, the File and Date/Time values show the file name and the localized date. |
| CAPT-10127 | As expected in Review, the material exceptions show only when there was an applied signature that someone signed. This properly notifies reviewers that there was an exception. |
| CAPT-10173 | When the "Automatic Opening of Containers" setting was enabled, a scanned container failed. The system now correctly processes container scans, even when the setting is enabled. |
| CAPT-10181 | When the "Automatic Opening of Containers" setting was enabled, a scanned container failed. The system now correctly processes container scans, even when the setting is enabled. |
| CAPT-10187 | The initiated tasks correctly post the results to Task Plan, and you can use them in linked tasks as expected. |
| CAPT-10227 | The "Next" button is now disabled while a container scan request is in progress which prevents users from navigating away prematurely and ensures scans complete as intended. |
| CAPT-10252 | When a step PUT request fails, the error message has been improved to include potential explanation |
| CAPT-10253 | The error message now includes a potential explanation when a recipe json's "Planned Equipment" values have a null context, and the step fails to update. |
| CAPT-9307 | The Procedure Modification signature dialog displays a "Proceed" button. |
| CAPT-9427 | When registering a batch with multiple matching materials, the 'Select Supplier' dropdown works as expected. |
| CAPT-9627 | Users are not able to add equipment to a deactivated step |
| CAPT-9637 | Added a debug endpoint to re-attempt item state calculation if they are not in expected state after collecting values. Logs and audits attempts for further debugging |
| CAPT-9644 | Local List parameter can now be used in Expressions |
| CAPT-9652 | The Review and Report's performance is improved for executions that contain many parallel steps. There are no changes to the initial loading of draft tasks. |
| CAPT-9666 | Added read only check for parameter templates to disable lifecycle actions for simple batch parameters. |
| CAPT-9689 | Removed code that was duplicating expected signature blocks to overcome limitations of protocol. Now with protocol updates this code in not needed. |
| CAPT-9728 | In *Capture*, the *freeForm* option is now automatically set to true when the Local List dropdown is empty, allowing input without predefined list values and preventing the exception. |
| CAPT-9753 | Users are now able to copy and export from the Review Notes Grid. |
| CAPT-9810 | The data verification signature is now applied only once per repeat step, which ensures cleaner and more consistent signature behavior. Previously, the data verification signature unnecessarily repeated for each value within a repeat step. |
| CAPT-9888 | Users are now able to see the last row(s) of the review grid. |
| CAPT-9937 | Fixed issue where wrong step cell group was being referenced when determining instructions visibility. |
| DAT-29214 | Updated the Import Materials dialog to display a “No materials found” message when no results are returned, replacing the previous indefinite loading indicator. |
| DAT-29278 | Fixed an issue in the Import Materials dialog where an invalid CAS Number message persisted after closing and reopening the dialog. |
| DAT-29422 | As expected, the saved or selected Activity views remain after you close and reopen the application. |
| DAT-29449 | Removed an incorrect Portuguese translation; the English text will now display instead. The correct translation will be included in a future release with updated language files. |
| DAT-29707 | Fixed an issue so that History now correctly displays edits to Characteristic Groups on the Specification page. |
| DAT-29770 | The Ansible installation of Foundation Hub 2026 on Linux now works properly. |
| DAT-29886 | Removed the extended property columns from the Import Materials dialog. |
| DAT-30179 | Updated behavior so that changing an entity’s lifecycle state now correctly updates its lastUpdated property. |
| DAT-30245 | Updated the system to allow material names of up to 500 characters. |
| DAT-30321 | Fixed an issue with language translations where messages containing single quotes did not display correctly and parameter substitution was broken. |
| DAT-30327 | Fixed an issue with language translations where messages containing single quotes did not display correctly and parameter substitution was broken. |
| DAT-30436 | Fixed an issue that occurred when the component field on a Specification was used as a comment. |
| DAT-30514 | Fixed an issue where Sample Plan contents were not displayed correctly after the Sample Plan changed collaborative spaces. |
| DAT-30515 | Fixed an issue where editing metadata (e.g., External ID) in a Workflow, Sample Plan, Specification, or Task Plan across collaborative spaces incorrectly displayed the error. |
| DAT-30516 | Fixed a tooltip in the PLP Protocol setup so it now correctly explains the values allowed in the Applicable Entities field when Usage Type is set to “Lifecycle Action Report”. |
| DAT-30586 | Updated the My Workflow widget to correctly support External ID searches. |
| DAT-30592 | In the Import Materials window, the selected containers and their materials have imported and display as expected. When you select the container, it automatically selects its parent material, and the material clears all associated container selections when you deselect the container. |
| DAT-30612 | Fixed an issue in Workflow when Sample Plans with no activities are used. |
| DAT-30696 | Implemented a soft cap of 45 Sample Plan Activities to balance usability with system limits. |
| DAT-30735 | Fixed an issue that was filling the log files with error messages during the push notification process. |
| DAT-30765 | Corrected the folder where Melody would log its data |
| DAT-30772 | Expanded the grid size so grid’s context menu could display in the Materials tab in Task Plan. |
| DAT-30827 | Added validation to ensure the Workflow description does not exceed the maximum character limit. |
| DAT-30839 | Fixed problem where Approved Child Activities could not be reopened for edit in the new Activities widget. |
| DAT-30873 | Fixed a liquibase migration issue that could occur in rare cases during upgrade. |
| DAT-30958 | Fixed an issue so that renaming a Workflow now also updates the name of the associated Task Plan. |
| DAT-31012 | Corrected an issue where using $top=0 with RunsetResults triggers caused system errors. |
| DAT-31022 | Fixed a display issue in the Add Sample Plan dialog within Workflows, ensuring all available features are now visible. |
| DAT-31072 | Fixed an issue with language translations where messages containing single quotes did not display correctly and parameter substitution was broken. |
| DAT-31123 | Fixed an issue on the Extended Properties page, allowing the order of properties to be changed. |
| DAT-31125 | Fixed an issue where lifecycle subscriber functionality stopped working when two subscriber protocols were set. |
| DAT-31184 | Fixed an issue where manually entered dates in the Date Collected field could display in the incorrect format. |
| DAT-31237 | Stopped MessageListeners from deleted applications being triggered where a second application registered a similarly configured message listener |
| DAT-31298 | Fixed an issue in the Equipment Calendar view, allowing users to select Tasks directly from the calendar. |
| DAT-31331 | When there is enough grid content for a vertical scroll, updated styling to push the horizontal scroll bar below the last item instead of overlapping it. |
| DAT-31340 | Fixed an issue where special characters in Task Document IDs were not displayed correctly in the Sample Plan widget. |
| DAT-31401 | The PasswordEncryptor now runs on Linux as expected. |
| DAT-31445 | Fixed an issue when the user could receive an exception while adding parameters to activities when the equipment scheduling calendar was configured. |
| DAT-31453 | Now there is validation to prevent the creation of a Retest task that uses an Abandoned sample. |
| DAT-31851 | As expected, the Set Make Activity dialog displays the correct Activity type. |
| DAT-31889 | The Sample Receive Data behavior works as expected in the case of a mistakenly disposed sample that is accidentally received. |
| DAT-31904 | The Amount and Expected Concentration columns contain combined values, so the filtering has been disabled in the order grids. |
| DAT-31928 | In a Workflow, the Character Group filter does not incorrectly include or exclude characteristics. |
| DAT-32174 | The time to load the Hub landing page has improved. |
| DAT-32350 | As expected, the Task Plan tab widget includes the Task ID column when you export or copy the values. |
| PROP-11802 | When cloning a child activity, the Method ID is not increased, as expected. |
| PROP-12096 | Browser localization is now being applied to the Recipe Report. |
| PROP-12345 | The summary functions now validate properly when the first parameter is not available because of an activation condition. |
| PROP-12346 | Image previews in the process phrasing are now functional in migrated activities |
| PROP-12365 | If the Activation Condition checkbox is checked on the Start parallel step, it is no longer passed onto steps within the parallel block. |
| PROP-12394 | When Equipment Reading Parameter display names are duplicated, they are now iterated, allowing the recipe to be saved. |
| PROP-12409 | Additional updates to recipe sample names are now being updated in the samples in the recipe's associated activity. |
| PROP-12417 | A helpful error is now thrown when an attempt is made to import a recipe that contains process parameters with invalid tags. |
| PROP-12421 | Fixed an expression issue that was preventing Capture from evaluating the expression. Expressions now correctly evaluate in Capture. |
| PROP-12429 | Fixed an issue with double-mapping dialogs, which no longer occurs. Materials can be successfully mapped to existing parameters and, if no parameters are available, users can add a new one and proceed with the mapping. |
| PROP-12432 | Under some conditions, the unit type previously prevented you from remapping to a different parameter. Now, as expected with the unit type set, you can remap the mapped parameter template to another compatible unit type. |
| PROP-12453 | The Process Element Summary no longer shows an error for a material mapping when the Disposition is 'Material Charge'. |
| PROP-12501 | The Compose Recipe Approval Report 2023 now reports all steps correctly when steps are included parallel blocks with predecessors. |
| PROP-12506 | A Compose recipe's Last Updated date-time localization is now correct for German and French. |
| PROP-12509 | The Compose recipe's Author field is now populated when "Link Existing" is used for process files. |
| PROP-12616 | Removing the sample from a process step now removes the mappings from the parameters. as well. |
| PROP-12619 | Fixed an issue in which badly formed vocabulary value constraints caused an issue with loading the vocabulary cache. |
| PROP-12622 | Fixed an issue in which Activity migration would fail if the associated Compose recipe contained an Extended Property mapped to an Equipment Parameter. |
| PROP-12645 | Fixed an issue where planned value settings were disabled when a planned value expression was added to the Numeric and Integer type parameters. Planned value settings can now updated after adding the expressions. |
| PROP-12654 | In French, the Help Text shown in the Recipe Equipment grid is now correct. |
| PROP-12659 | Previously, comments were incorrectly stripped from phrases when there was a mix of parameters with display names that contained comment characters, full-line comments, and end-of-line comments. Now, the comments remain, and the expression parsing behaves as expected in all cases. |
| PROP-12680 | The expression editor Round() function now accepts a parameter value for the nDecimals argument. |
| PROP-12718 | Values removed from the local list parameter are now fully removed, they are no longer displayed as usable planned values in the drop down. |
| PROP-12742 | The maximum character length of the Compose Material name field has increased from 245 characters to 500 characters. |
| PROP-12763 | The expression editor now shows the parameters from all previous steps in the recipe's process. |
| PROP-12796 | In the Equipment IOQ report, the Equipment Type's extended properties display correctly now that the number properties are strings. |
| PROP-12951 | The timeout for 'Biovia Recipe Approval Report 2023' generation has been increased. |
| SEC-10719 | On the Equipment Type page, the error scenario of creating two equipment instances with the same barcode value in one transaction is now handled correctly. |
| SEC-10753 | Improved the user experience when typing to select a value from a drop-down list in Admin and Settings. Better error messages are provided when an invalid value is entered or when a value is typed but not selected from the list. |
| SEC-10754 | Deletion of equipment classes with active equipment types is now prevented. Deletion of equipment types with active equipment instances is now prevented. |
| SEC-10757 | History events are now displayed when the filter is set to show only deletions. |
| SEC-10782 | The Data Center location time zone is now editable to enable its use for metrology events. |
| SEC-10794 | Migrations no longer fail when there is a GUID mismatch in the Organization Type hierarchy. |
| SEC-10949 | When there are more than 5,000 items during a migration, the import button is no longer disabled. |
| SEC-11111 | It is now possible to remove an equipment command from the equipment's gateway configuration details page when it is no longer needed. |
| SEC-11151 | It is no longer possible to configure an equipment instance's gateway location when its connection type is set to "Not connected". This prevents saving the equipment in a configuration that will not work. |
| SEC-11158 | Improved the security of the information stored in the Empower add-in installation log file. |
| SEC-11164 | When printing labels, an error message is now displayed if the user does not have a preferred location but the system is configured to show equipment only at the user's location. |
| SEC-11293 | Duplicate vocabulary lists are no longer displayed when editing a parameter template. |
| SEC-11341 | As expected, the parameter context tags are not lost when you migrate a recipe. |
| SEC-11430 | When you migrate a recipe whose sequence template does not exist in the destination system, the improved error message now reads, "Sequence Template \[template name\] is missing. Create the missing sequence template and then try again." |
| SEC-11602 | For better usability, the following changes were made to the Equipment Work Items grid: \* The "Last Date" column was renamed to "Last Processed." \* The "Last Updated" column was moved. \* You can now sort the data in the "Last Updated" column from newest to oldest. \* The "Work Item Last Updated" column is now hidden. |
| SEC-8187 | Improved the error message provided when attempting to migrate a location to a destination system that has an incompatible location hierarchy. |
| DAT-30009 | Fixed an issue that prevented editing Task Properties for tasks created by a Stability Workflow. |
| DAT-31420 | Fixed an issue in the Workflow design grid where updates made via the API were not always displayed. |
| PROP-12252 | In the comparison and IOQ reports, the BIOVIA logo is shown with the correct color. |
| PROP-12387 | The Process Element Summary icon for an activation condition expression now persists after a refresh, even when the step contains no parameters. |
| PROP-12393 | When multiple property parameters are added to a step, the Expand All and Collapse All parameters are shown immediately and no longer require a changing of parameter view for them to render. |
| PROP-12426 | Fixed an issue where, in some conditions, the Process Tree Flag for Activation Condition Expressions required a refresh to display; a refresh is no longer required. |

## Resolution

BIOVIA Foundation, Compose, and Capture 2026 FH4 was released in April 2026 and is available for download at [https://software.3ds.com](https://software.3ds.com/ "Dassault Systèmes Download platform") under BIOVIA products:

**Product line:** Lab, Scientific and Content Solutions

**Release:** BIOVIA 2026

**Level:** BIOVIA 2026 Golden

**Fixes for this level:** BIOVIA 2026 Golden HF3

## How to contact BIOVIA Support

If you have any questions, please contact [BIOVIA Support](https://www.3ds.com/support/contact-your-support-center "Contact your Dassault Systèmes BIOVIA regional support center").

## Need Assistance?

Our support team is here to help you make the most of our software. Whether you have a question, encounter an issue, or need guidance, we've got your back.

[Contact support](/support/contact-your-support-center)

[Submit a request via 3DSupport App](https://dspart004-eu1-partners-ifwe.3dexperience.3ds.com/#dashboard:0b021cdc-9e58-47c3-8527-3d2314c48683/tab:3DSupport)