Co-simulation with MpCCI & STAR-CD Compatibility Matrix
STAR-CD Version | Qualified Abaqus version | |||||
|---|---|---|---|---|---|---|
Abaqus 6.10 | Abaqus 6.9-EF | Abaqus 6.9 | Abaqus 6.8 | Abaqus 6.7 | ||
4.08 | 1 | MpCCI 3.1.0 | MpCCI 3.1.0 | - | - | |
4.04 | - | - | - | MpCCI 3.0.6-20 | - | |
4.02 | - | - | - | - | MpCCI 3.0.6-5 | |
1 No longer qualified by SIMULIA. Please contact CD-adapco for support.
Abaqus Supported platforms for FSI Co-simulation using MpCCI & STAR-CD
| Release | Release | Release | Release | Release |
Windows/x86-32 | 1 | 1 | 1 | 1 | - |
Windows/x86-64 | 1 | 1 | 1 | 1 | - |
Linux/x86-32 | 6.10 2 | 6.9-EF | 6.9-1 | 6.8-1 | 6.7-1 |
Linux/x86-64 | 6.10 2 | 6.9-EF | 6.9-1 | 6.8-1 | 6.7-1 |
Linux/Itanium | - | - | 6.9-1 | 6.8-1 | - |
HP-UX/Itanium | - | - | - | 6.8-1 | - |
AIX/Power | 6.10 2 | 6.9-EF | 6.9-1 | 6.8-1 | - |
HP-UX/PA-RISC | - | - | - | - | - |
1STAR-CD 4.04 and 4.08 are not available on Windows/x86-32 or Windows/x86-64 Platforms
2 No longer qualified by SIMULIA. Please contact CD-adapco for support.
- Simulia recommends STAR-CD 4.04 (or later) and MpCCI 3.0.6-20 (or later) because significant usability improvements have been made for co-simulation with these releases.
- Co-simulation with MpCCI & STAR-CD has been qualified with the structural and fluid analyses running on the same platform.
- Co-simulation with MpCCI & STAR-CD has been tested in a cross-platform mode; however this has not been officially qualified.
- It is expected that co-simulation can be performed with the CFD analysis running other platforms, not supported by Abaqus. For a full list of platforms supported by STAR-CD, contact CD-adapco..
Dassault Systèmes
- loading ...
- English
- Select region
- Contact
- 3DStore