Co-Simulation with MpCCI & FLUENT Compatibility Matrix
FLUENT Version | Qualified Abaqus version | |||||
Abaqus 6.10 | Abaqus 6.9-EF | Abaqus 6.9 | Abaqus 6.8 | Abaqus 6.7-EF | Abaqus 6.7 | |
12.0.16 | MpCCI 4.0.1 | - | - | - | - | - |
6.3.26 | - | MpCCI 3.1.0 | MpCCI 3.1.0 | MpCCI 3.0.6-20 | MpCCI 3.0.6-17 | MpCCI 3.0.6-5 |
• Co-Simulation with MpCCI & Fluent was qualified for Abaqus Version 6.7 with MpCCI Version 3.0.6-5 on all supported platforms except Windows/x86-64, which requires MpCCI Version 3.0.6-7.
Co-Simulation with MpCCI & FLUENT Compatibility Matrix
| Release | Release | Release | Release | Release | Release |
Windows/x86-32 | 6.10 | 6.9-EF | 6.9 | 6.8-1 | 6.7-EF | 6.7-1 1 |
Windows/x86-64 | 6.10 | 6.9-EF | 6.9 | 6.8-1 | 6.7-EF | 6.7-1 2 |
Linux/x86-32 | - | 6.9-EF | 6.9 | 6.8-1 | 6.7-EF | 6.7-1 1 |
Linux/x86-64 | 6.10 | 6.9-EF | 6.9 | 6.8-1 | 6.7-EF | 6.7-1 1 |
Linux/Itanium | - | 6.9-EF | 6.9 | 6.8-1 | 6.7-EF | 6.7-1 1 |
HP-UX/Itanium | - | 6.9-EF | 6.9 | 6.8-1 | 6.7-EF | 6.7-1 1 |
AIX/Power | - | 6.9-EF | 6.9 | 6.8-1 | 6.7-EF | 6.7-2 1 |
HP-UX/PA-RISC | - | - | - | - | - | 6.7-2 1 |
IRIX/MIPS | - | - | - | - | - | - |
Tru64/Alpha | - | - | - | - | - | - |
Solaris/UltraSparc | - | - | - | - | - | - |
1 Qualification was done with MpCCI 3.0.6-5
2 Qualification was done with MpCCI 3.0.6-7
- Co-Simulation with MpCCI & FLUENT has been qualified with the structural and fluid analyses running on the same platform.
- Co-Simulation with MpCCI & FLUENT has been tested in a cross-platform mode; however this has not been officially qualified.
- It is expected that Co-Simulation can be performed with the CFD analysis running other platforms not supported by Abaqus. For a full list of platforms supported by FLUENT, contact ANSYS, Inc.
- loading ...
- English
- Select region
- Contact
- 3DStore