Abaqus 6.10-EF Graphics Devices
SIMULIA tests specific graphics devices to ensure adequate performance with Abaqus/CAE and Abaqus/Viewer; the graphics devices that have been tested (or scheduled for testing) are listed in the tables below. However, we cannot certify that these devices are completely compatible with all possible hardware and software configurations. Graphics cards certified with the 6.10-1 release are also supported with the 6.10-EF release. Full listing of the 6.10-1 supported graphics can be found here. Other devices may be compatible but have not been tested.
NOTE: Newer driver versions for the graphics card listed on this page are expected to work, but may not be compatible. We recommend that you use the tested driver version if you experience problems.
We may update graphics tuning parameters for graphics devices. These changes are intended to configure Abaqus to best utilize individual graphics devices. Updated graphics tuning parameters are included in the graphicsConfig.env file, which can be downloaded and placed in your Abaqus installation.
The use of graphics hardware acceleration on Windows platforms may cause display problems with some graphics adapters or drivers. Users may wish to disable graphics hardware acceleration to determine if a particular issue is specific to their graphics adapter or graphics driver. For instructions on how to turn off hardware acceleration see Additional Information.
Listing of tested configurations per platform:
- Windows/x86-32
- Windows/x86-32(laptop)
- Windows/x86-64
- Windows/x86-64(laptop)
- Linux/x86-64
Windows/x86-32 | |||||
Vendor | Graphics Device | Graphics Memory | Driver Version | Operating System | Results |
AMD [ATI] | FirePro V7750 | 1GB | 8.743 | Windows 7 Ultimate | Pass* |
NVIDIA | Quadro FX 1800 | 768MB | 259.12 | Windows XP SP2 | Pass |
Quadro 5000 | 2GB | 258.96 | Windows XP SP2 | Pass | |
Quadro 4000 | 2GB | 259.57 | Windows 7 Ultimate | Pass* |
Windows Laptop (32-bit) | |||||
Vendor | Graphics Device | Graphics Memory | Driver Version | Operating System | Results |
AMD [ATI] | Mobility FireGL V5700 |
512MB | 8.633 | Windows XP SP2 | Pass |
Intel | GMA 4500MHD |
1GB | 6.14.10.5248 | Windows XP SP3 | Fail |
NVIDIA | Quadro FX 880M |
1GB | 189.55 | Windows XP SP2 | Pass |
Windows/x86-64 | |||||
Vendor | Graphics Device | Graphics Memory | Driver Version | Operating System | Results |
AMD [ATI] | FirePro V3750 | 256MB | 8.743 | Windows XP SP2 | Pass |
FirePro V8700 | 1GB | 8.743 | Windows XP SP2 | Pass | |
NVIDIA | Quadro 600 | 1GB | 259.81 | Windows 7 Ultimate | Pass* |
Quadro FX 3800 | 1GB | 259.12 | Windows 7 Ultimate | Pass* | |
Quadro FX 5800 | 4GB | 256.96 | Windows 7 Ultimate | Pass* |
Windows Laptop (64-bit) | |||||
Vendor | Graphics Device | Graphics Memory | Driver Version | Operating System | Results |
AMD [ATI] | Mobility FireGL V5700 |
|
| Windows 7 Ultimate | Testing In Progress |
Linux/x86-64 | ||||||
Vendor | Graphics Device | Graphics Memory | Driver Version | X11 Version | Operating System | Results |
AMD [ATI] | FirePro 4800 | 1GB | 8.743 | X.org 6.9.0 | SLES10 SP2 | Pass |
FirePro V8750 | 1GB | 8.773 | X.org 6.9.0 | SLES 10 SP2 | Pass | |
NVIDIA | Quadro FX 4800 | 1.5GB | 256.44 | X.org 7.1.1 | RHEL 5.0 | Pass |
Quadro FX 5800 | 4GB | 256.35 | X.org Server 1.5.2 | SLES 11 | Pass | |
Quadro 2000 | 1GB | 260.19 | X.org 6.9.0 | SLES 10 SP2 | Pass |
Additional Information
Abaqus/CAE and Abaqus/Viewer support OpenGL hardware graphics acceleration on all supported platforms. For instructions on how to turn off hardware acceleration, see How to Disable Graphics Hardware Acceleration to Resolve Graphics Incompatibility.
All Windows laptops are tested with their original factory display. Testing does not include any external display devices.
In case the graphics device in which you are interested in is not listed on this page, you may submit a Request for Enhancement.
See Customer Submission of Requests-for-Enhancements (RFEs) for SIMULIA
To determine your graphics card and graphics card driver for Windows systems
It is best to use the system Display Properties dialog to get this information, but if there is difficulty finding it or only a remote access to the system is possible the findVid program can be utilized.
- Download the findVid program appropriate for your system (32-bit or 64-bit)
- Then run the executable in a command prompt window
- The following is an example output from running the findVid.exe command
=============================================
C:\Temp>findVid32.exe
Device Name: NVIDIA Quadro FX 5600
Video Processor: Quadro FX 5600
Driver Date: 02/18/2009
Driver Version: 6.14.11.8208
Horizontal Res: 1280 pixels in 387 mm => 3.307493 pix/mm
Vertical Res: 1024 pixels in 310 mm => 3.303226 pix/mm
Display Settings: 1680 x 1050 @ 0,0 - 32-bit - 60 Hz============================================
Updating your graphicsConfig.env file
Follow these instructions for updating your graphicsConfig.env file. You should update each release of Abaqus 6.10 that you have installed (e.g. 6.10, ...). The examples given in the instructions show updating Abaqus 6.10.
NOTE: The date stamp on the graphicsConfig.env file should help you determine which releases of Abaqus 6.10 you should update. If the date of the file is later than the creation date of the release (reported by abaqus whereami), then you should update that release.
- Find your Abaqus 6.10 version install directory and set your current directory to the site directory for that version.
% abaqus whereami
Abaqus Version 6.10-1
Abaqus Site ID: <your_site>
Abaqus is located in the directory /disk2/abaqus/6.10-1
/disk2/abaqus/6.10-1/cae/External/ebt
Sequence Information:
/disk2/abaqus/6.10-1/cae: 2009_11_19-18.06.29 100570
% cd /disk2/abaqus/6.10-1/site</your_site> - Rename the existing graphicsConfig.env file
% cp graphicsConfig.env graphicsConfig.env.old
- Download the new graphicsConfig.env file by clicking on the file name in the browser window.
- Select the 'save as' option, and save the file in your Abaqus 6.10-1 site directory. In the current example, the path to this directory is /disk2/abaqus/6.10-1/site.
- Reset the permissions on the graphicsConfig.env file.
% chmod 644 graphicsConfig.env
* Windows 7 Issue: Running Abaqus/CAE or Abaqus/Viewer using Windows 7 (or Windows Vista) Aero Themes
Viewport window contents may not be refreshed correctly after a manipulation operation such as repositioning. Any subsequent viewport action alleviates the issue and the viewport contents are redrawn correctly.