DraftSight®: Free* CAD software for your DWG files by Dassault Systèmes
DraftSight lets professional CAD users, students and educators create, edit and view DWG files. DraftSight runs on Windows®, Mac® and Linux.
Download and Activate DraftSight
Follow the 2 simple steps below to download and activate DraftSight V1R5.1. Find the release notes here, with details on new features included in this release.
Step 1. Download Download the version below that is right for your operating system
Step 2. Activate Enter your email address and click the confirmation link when you receive your activation confirmation email
This End User License Agreement for DraftSight® software, as well as DraftSight-related programs and add-ins, including those that are part of the DraftSight additional offerings referenced below (“Additional Offerings”), and DraftSight service offerings, (“Agreement”) is made by and between Dassault Systèmes SolidWorks Corporation, 175 Wyman Street, Waltham, Massachusetts, USA (“DS SolidWorks”) and you (“Licensee”).
Whether or not provided as part of an Additional Offering, DraftSight is licensed at no charge to end users pursuant to the terms and conditions of this Agreement, although activation is required. End users may, however, pay a fee for DraftSight-related programs, add-ins, DraftSight service offerings and Additional Offerings. The license terms for the licensable elements included with Additional Offerings and as may otherwise be made available by DS SolidWorks from time to time are as set forth below. Depending on how Licensee acquires such separately licensable DraftSight-related programs and add-ins, Additional Offerings and DraftSight service offerings, there may be other separately specified terms and conditions that apply.
IMPORTANT – READ CAREFULLY: The terms and conditions herein set forth a legal agreement between DS SolidWorks and Licensee relating to DraftSight and DraftSight-related programs and add-ins, such as network license, the Toolbox add-in, tools, and APIs, distributed with or otherwise subject to, this Agreement (the “Licensed Program[s]”), as well as DraftSight service offerings. Licensee should carefully read these terms and conditions BEFORE downloading and installing the Licensed Program(s).
DS SolidWorks hereby grants to Licensee a non-transferable and non-exclusive license to use the Licensed Program(s) solely in accordance with this Agreement. The Licensed Program(s) may only be installed, executed, and accessed by Users on hardware belonging to Licensee (“Machines”), and may not be executed or accessed by any other means, including without limitation via a network unless Licensee has been granted a network license pursuant to the terms and conditions of this Agreement. “Users” are Licensee as well as its employees, students, consultants, and subcontractors who access the Licensed Program(s) on Machines. Licensee may make the necessary number of copies of the applicable Licensed Program(s) for installation and one copy for back up of each Licensed Program in support of Licensee’s authorized use pursuant to this Agreement. No rights including any right to use, reproduce, or display, other than those specifically described in this Agreement are granted to Licensee. Licensee may not modify or make works derivative of the Licensed Programs(s) or make compilations or collective works that include the Licensed Programs(s). Except to the extent permitted by applicable law, Licensee shall not analyze for purposes competitive to DS SolidWorks or its affiliates, reverse engineer, decompile, disassemble, or otherwise translate all or part of the Licensed Program(s). If Licensee wishes to achieve or maintain interoperability between the Licensed Program(s) and other computer software or equipment, within Licensee’s authorized use as defined in this Agreement and under conditions provided for by law, Licensee must receive from DS SolidWorks a license to use standard interfaces, exclusively for internal use by Users to achieve interoperability, at the then current prices and contractual conditions of DS SolidWorks or, if standard interfaces are not available, DS SolidWorks, for a fee, may provide Licensee with the necessary information to permit interoperability.
2. ADDITIONAL OFFERINGS AND TERMS
A. Content of the Prosumer Service Offering for DraftSight. Subject to payment by Licensee of applicable charges, DS SolidWorks shall provide Licensee with the single user Prosumer Service Offering for DraftSight consisting of support services to answer questions concerning the installation, activation and use of DraftSight pursuant to the conditions described at www.3ds.com/terms/support-policies. Upon termination or expiration of this Agreement, Licensee shall no longer be entitled to receive support services. However, Licensee may continue to use the no-charge support provided via the DraftSight community, if available.
B. Content of the Enterprise Pack Offering for DraftSight. Subject to payment by Licensee of applicable charges, DS SolidWorks shall provide Licensee with the Enterprise Pack Offering for DraftSight consisting of:
a) Support services to answer questions concerning the installation, activation and use of DraftSight pursuant to the conditions described at www.3ds.com/terms/support-policies, considering that a maximum of ten (10) of Licensee’s designated users (identified in advance to DS SolidWorks) in each major geography (defined as the Americas, Japan, Asia Pacific and Europe/Middle East/Africa) may contact DS for support.
Upon termination or expiration of this Agreement, Licensee shall no longer be entitled to receive support services. However, Licensee may continue to use the no-charge support provided via the DraftSight community, if available.
b) A grant of the following rights under the following conditions:
A right to use the License Server (“LS”) delivered with the Enterprise Pack Offering for DraftSight: i) solely to provide infrastructure for network license management of the DraftSight software during the term of this Agreement, and ii) solely to utilize the API libraries as set forth below in this Section 2 B b).
A right to administer DraftSight users with the LS for the number of concurrent users for which Licensee is entitled.
The DraftSight software can be activated using the LS, replacing the need to activate using an e-mail address from each DraftSight copy. The LS will allow concurrent usage by Licensee’s users up to the entitled number of concurrent users for the Enterprise Pack Offering for DraftSight.
DraftSight licenses activated using the LS must be used solely in the major geography for which they have been acquired (a major geography being defined as the Americas, Japan, Asia Pacific and Europe/Middle East/Africa) and for which the corresponding geography-specific charge has been paid by Licensee. DS SolidWorks recognizes that some of Licensee’s users may have downloaded a no-charge license of DraftSight during the term of this Agreement. However, Licensee hereby represents that users of no-charge licenses of DraftSight will not benefit from support services as defined in Section 2 B a) above. Upon termination or expiration of this Agreement, the DraftSight software license must be reinstalled and activated using the then-current e-mail procedure (machine-based activation), which is available with the standalone DraftSight installation, within thirty (30) days following termination or expiration.
A license for the API libraries (“API”), the Draw Compare tool, the Toolbox, and Design Library add-in products for DraftSight, and other add-in tools for DraftSight that may be available from time to time from DS SolidWorks (collectively “Add-ins”), for use with DraftSight Releases installed during the term of this Agreement. Licensee may need to periodically request a new LS license key to continue usage of the API and Add-ins, including upon non-renewal of the Enterprise Offering for DraftSight. Add-ins may not be compatible with versions of DraftSight that predate the release of the Add-in. Use of the API and Add-ins is limited to the version of the API and Add-ins enabled by the LS license key.
The right to receive upgrades for the API, Add-ins and other DraftSight tools that may be available from time to time with the Enterprise Pack Offering for DraftSight during the entitlement term.
C. Content of the Professional Pack Offering for DraftSight. Subject to payment by Licensee of applicable charges, DS SolidWorks shall provide Licensee with the Professional Pack Offering for DraftSight consisting of:
A license for the API libraries (“API”), the Draw Compare tool, the Toolbox, and Design Library add-in products for DraftSight, and other add-in tools for DraftSight that may be available from time to time from DS SolidWorks (collectively “Add-ins”), for use with DraftSight Releases installed during the term of this Agreement. Add-ins may not be compatible with versions of DraftSight that predate the release of the Add-in. Use of the API and Add-ins is limited to the version of the API and Add-ins enabled by the activation process.
The right to receive upgrades for the API l, Add-ins and other DraftSight tools that may be available from time to time with the Professional Pack Offering for DraftSight.
The right to activate DraftSight software using an on-line activation process delivered with the Professional Pack Offering for DraftSight during the entitlement term.
Use of this product is only for one computer at a time
D. Content of the Enterprise Education Pack Offering for DraftSight. Subject to payment by Licensee of applicable charges, DS SolidWorks shall provide Licensee with the Enterprise Education Pack Offering for DraftSight pursuant to the conditions defined in Section 2 B above, for the maximum number of concurrent users defined for the Enterprise Education Pack Offering for DraftSight. The following conditions shall apply to the Enterprise Education Pack Offering for DraftSight:
The use of such Enterprise Education Pack Offering for DraftSight shall be exclusively limited to education, institutional, instruction, and/or academic purposes, and exclude use by students and researchers having any direct or indirect industrial, commercial and business purposes.
A maximum of two (2) of Licensee’s designated users in the case of Enterprise Education Pack for DraftSight – Classroom Pack (identified in advance to DS SolidWorks) may contact DS SolidWorks for support.
A maximum of eight (8) of Licensee’s designated users in the case of Enterprise Education Pack for DraftSight – Campus Pack (identified in advance to DS SolidWorks) may contact DS SolidWorks for support.
3. TERM & TERMINATION
This Agreement shall come into full force and effect upon Licensee’s acceptance of these terms and conditions, where acceptance is indicated via a user interface presenting this Agreement, by downloading and/or installing and/or using the Licensed Program(s), and/or by Licensee’s acceptance of another agreement that incorporates by reference this Agreement. This Agreement may be terminated at any time by DS SolidWorks for any breach hereof upon notice to Licensee. Periodic activation may be required by Licensee in order to continue use of the Licensed Program(s). Use of the Licensed Program(s) may be interrupted until necessary activation steps are taken by Licensee. Upon termination hereof, Licensee shall immediately uninstall and delete all copies of the Licensed Program(s) and discontinue use of the Licensed Program(s). Sections 3, 4, 5, 6, 7, 8, and 9 shall survive termination of this Agreement.
4. PROTECTION AND NON-DISCLOSURE
The Licensed Program(s), including any copies made by or for Licensee, in whole or in part, are the sole property of DS SolidWorks and/or its licensor(s). All intellectual property rights in the Licensed Program(s) belong exclusively to DS SolidWorks or its licensor(s). DS SolidWorks and/or its licensors shall retain all title, copyright and other intellectual property rights in the Licensed Program(s) and all modifications, enhancements or other works derivative of the Licensed Program(s). Licensee shall preserve and reproduce any copyright, patent and trademark notices that may appear in the Licensed Program(s) on all copies thereof, in whole or part. Licensee shall keep full, true and accurate records of all copies of the Licensed Program(s), which records shall be available for audit by DS SolidWorks. Licensee recognizes that methodologies, techniques, expressions, ideas and concepts contained in or expressed within the Licensed Program(s) are proprietary information and may be trade secrets of DS SolidWorks or its licensor(s).
5. LICENSEE’S RESPONSIBILITIES
Licensee is solely responsible for supervising, managing and controlling the use of the Licensed Program(s) in compliance with this Agreement, and shall take all appropriate measures, including with Users, to ensure such compliance, including without limitation compliance with its authorized use, and confidentiality obligations. In addition, Licensee represents and warrants that each of its Users is not a citizen of or located within an embargoed or otherwise restricted nation under U.S. law (including as of May 2013, without limitation, Cuba, Iran, North Korea, Sudan and Syria) and that Licensee or any of its Users are not otherwise prohibited under the export control laws from receiving the Licensed Program(s). All rights to use the Licensed Program(s) are granted on condition that such rights are forfeited for failure to comply with the terms of this Agreement. Export to Licensee of Licensed Program(s) is subject to all applicable countries’ export and re-export laws and regulations. DS SolidWorks shall have no liability whatsoever towards Licensee if such authorizations, licenses or approvals are not obtained. Licensee shall not export or re-export, either directly or indirectly, Licensed Program(s) when such export or re-export requires an export license or other governmental approval without first obtaining such license or approval. Licensee hereby certifies to DS SolidWorks that the Licensed Program(s) ordered hereunder will not be used in any nuclear, chemical, biological, weapons or missile delivery systems and will not be diverted to any country, company or individual that is prohibited by the applicable export laws of any country.
6. WARRANTY AND DISCLAIMER OF WARRANTY, RISK OF USE, LIMITATION OF LIABILITY AND INDEMNITY
THE LICENSED PROGRAM(S) ARE MADE AVAILABLE ON AN "AS IS" BASIS, AND WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED, ORAL OR WRITTEN, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY, TITLE, NON-INFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE, AND ALL SUCH WARRANTIES, CONDITIONS, UNDERTAKINGS, AND TERMS ARE HEREBY EXCLUDED TO THE EXTENT PERMITTED BY LAW. IN NO EVENT SHALL DS SOLIDWORKS OR ITS LICENSOR(S) BE LIABLE FOR DIRECT OR INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES, INCLUDING LOSS OF USE, PROFIT, REVENUE, OR GOODWILL, WHETHER BASED IN CONTRACT, NEGLIGENCE, OR OTHERWISE, ARISING OUT OF, RESULTING FROM OR IN ANY WAY RELATING TO LICENSEE’S USE OF THE LICENSED PROGRAM(S), INCLUDING, WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF DATA, OR LOSS OF USE DAMAGES ARISING OUT OF THIS AGREEMENT OR THE SUPPLYING OF THE LICENSED PROGRAM(S), EVEN IF DS SOLIDWORKS OR ITS LICENSOR(S) ARE AWARE OF OR ARE NOTIFIED OF THE POSSIBILITY THEREOF. LICENSEE'S USE OF LICENSED PROGRAM(S) SHALL BE AT LICENSEE'S SOLE RISK. LICENSEE SHALL INDEMNIFY AND HOLD DS SOLIDWORKS AND ITS LICENSORS HARMLESS FROM ANY AND ALL LIABILITY OR EXPENSE, INCLUDING REASONABLE ATTORNEYS' FEES, ARISING OUT OF THIS AGREEMENT OR LICENSEE’S USE OF THE LICENSED PROGRAM(S) UNDER THIS AGREEMENT. The Licensed Programs are tools intended for use by trained professionals and to educate and train students only, and are not substitutes for professional judgment or independent testing of physical prototypes for product stress, safety and utility; Licensee and its users are solely responsible for any results obtained from using the Licensed Programs.
7. INTEGRATION, GOVERNING LAW, AND JURISDICTION
Except as expressly permitted herein, this Agreement may be modified only by written amendment signed by the parties and no other act, document, usage or custom shall be deemed to amend or modify this Agreement, including but not limited to Licensee’s terms and conditions. In the event of a conflict or inconsistency between the terms of this Agreement and the terms of another agreement between Licensor and either DS SolidWorks or a DS SolidWorks affiliate, with respect to the subject matter herein, the terms of the other agreement shall prevail. The Agreement shall be governed, construed, and enforced in accordance with the substantive laws of the Commonwealth of Massachusetts without regard to its conflicts of law principles, the United Nations Convention on Contracts for the International Sale of Goods and will be deemed a contract under seal. The English language version of this Agreement shall be the authorized text for all purposes, despite translations or interpretations of this Agreement into other languages. If for any reason a court of competent jurisdiction finds any provision of this Agreement, or a portion thereof, to be unenforceable, that provision shall be enforced to the maximum extent permissible and the remainder of this Agreement shall remain in full force and effect. Licensee acknowledges and agrees that the terms in this section shall not prevent, restrict or otherwise limit in any manner, DS SolidWorks' rights to seek equitable remedies, including injunctive relief before any competent court in any jurisdiction.
8. U.S. GOVERNMENT RESTRICTED RIGHTS
The Licensed Program(s) and related Documentation, and any other technical data provided hereunder is commercial in nature and developed solely at private expense. The Licensed Programs are delivered as “Commercial Computer Software” as defined in DFARS 252.227-7014 (June 1995) or as a “Commercial Item” as defined in FAR 2.101(a) and, consistent with FAR 12.212 and DFARS 227.7202, as applicable, are licensed to Licensee only with those rights as are granted pursuant to this Agreement (Licensor’s standard commercial terms). Technical data is provided with limited rights only as provided in DFAR 252.227-7015 (Nov. 1995) or FAR 52.227-14 (June 1987), whichever is applicable.
9. CANADIAN LICENSES
If Licensee licensed this product in Canada, Licensee agrees to the following: The parties hereto confirm that it is their wish that this Agreement, as well as other documents relating hereto, including Notices, have been and shall be written in the English language only. Les parties aux présentes confirment leur volonté que cette convention de même que tous les documents y compris tout avis qui s’y rattache, soient rédigés en langue anglaise.
If you aren't sure whether you are running 32bit or 64bit, or you received an error while installing for Windows, click here to view our support post in the DraftSight community.
*Standalone license. Activation required.
**Windows Users: DraftSight V1R4.0 and later versions are unsupported on Windows Vista, and on Windows 8 32bit. Please make sure to select the correct version for your operating system, as 32bit will not install on 64bit machines, and vice versa.
***Mac Users: DraftSight is unsupported on Mac 32bit machines
DraftSight Offers Services for Every Kind of User.
For users who want to get the most out of DraftSight, services are available for commercial, education, and individual users. For details on each service or to purchase support today, please visit the DraftSight Services page.