CATIA Used to Design Nearly 75 Percent of Vehicles Introduced at 2008 North American International Auto Show

14/01/2008

Dassault Systèmes PLM Solution Shapes Majority of This Year’s New Vehicle Model Introductions

Auburn Hills, Mich., January 14, 2008  Dassault Systèmes (DS) (NASDAQ: DASTY; Euronext Paris: #13065, DSY.PA), a world leader in 3D and Product Lifecycle Management (PLM), today announced that CATIA, the company’s design authoring solution, was used in the development of nearly 75 percent of the 27 introductory and concept vehicles* launched at the 2008 North American International Auto Show (NAIAS) taking place in Detroit, January 19 – 27.

In just ten years, the number of new vehicle models has increased by 33 percent. CATIA’s new design technologies have grown at a similar pace, allowing designers to focus on innovation, and encouraging creative and exciting designs.  This ability to innovate and iterate quickly is critical in making gains in the overall product development process, helping to drive down cost, and improving quality.

Today, all of the world’s major automakers use Dassault Systèmes’ PLM solutions, comprised of CATIA, DELMIA, ENOVIA and SIMULIA. These solutions enable manufacturers to develop and optimize vehicle design and manufacturing processes in the virtual world to deliver higher quality products in a shorter time, at a reduced cost.

Dassault Systèmes’ Vice President for Design Experience Anne Asensio, said, “Our mission is to provide the solutions that enable innovation from design initiation through the entire lifecycle of the product. The fact that so many of the incredible vehicles being introduced at the Auto Show were designed in CATIA validates the integrity of that mission.”

The latest release of CATIA empowers powertrain and chassis designers with the debut of breakthrough auto-draft capabilities, as well as introducing end-to-end industry process coverage for composite design to manufacturing, electrical harness creation and documentation and printed circuit-board design. It also consolidates functional modeling support for the design of complex machined parts, extending this unique approach to more manufacturing processes.

* Based upon NAIAS vehicle introductions announced in January 7, 2008 Automotive News.

###

Informazioni su Dassault Systèmes

Come leader mondiale del 3D e delle soluzioni PLM, Dassault Systèmes conta oltre 90.000 clienti in 80 paesi. Pioniere nel mercato dei software in 3D dal 1981, Dassault Systèmes sviluppa e commercializza applicazioni software e servizi che supportano i processi industriali, fornendo una visione 3D di tutto il ciclo di vita del prodotto, dalla fase di progettazione a quella di manutenzione. La gamma di prodotti DS è costituita da CATIA, per il disegno di prodotti virtuali, DELMIA per la produzione virtuale, SIMULIA per le verifiche virtuali ed ENOVIA per la gestione del ciclo di vita collaborativo globale, con ENOVIA VPLM, ENOVIA MatrixOne e ENOVIA SmarTeam. Dassault Systèmes è quotato sul mercato Nasdaq (DASTY) ed Euronext di Parigi (#13065, DSY.PA). Per ulteriori informazioni clicca sul link %20>http://www.3ds.com

CATIA, DELMIA, ENOVIA, SIMULIA e SolidWorks sono marchi registrati di Dassault Systèmes o filiali negli USA e/o altri paesi.